Advertisement:

Author Topic: problem linking MY SQL to PHP and SMF on install. Please help  (Read 46747 times)

Offline agentx42

  • Semi-Newbie
  • *
  • Posts: 44
Ok. I'm a hog looking at a wristwatch with this.

I am a volunteer trying to set up SMF for a non-profit (www.partners-international.org).  I have zero programming expertise.

So far I have managed to:

1. Install and configure Apache 2.2 and Apache Tomcat running on a system using Windows 2003 server
2. Install and configure PHO (at least when I run the test it comes up (http://www.cai.servebbs.org/test.php)
3. I have MySQL installed and it says it is running. It must be because someone linked it to another program and that one wored ok.
4. I try to install SMF using the install option: http://www.cai.servebbs.org/SMF/install.php
5. There is no link to the forum now because I can't get it running, but the links above get you to the areas you can including where the install is stuck.
6. I can't find the status.php file. Could that be because the install is not finished?
7. A link to your phpinfo.php is provided above it's the test file.
8. This is a dedicated server see info above
9. My forum has no posts, I'm stuck in the install with this problem
10. There are no users on line due to the fact it is not installed.
11. I have not installed any mods.

when i run the install.php I get the following error message:

The installer was unable to detect any database support in PHP. Please ask your host to ensure that PHP was compiled with the desired database, or that the proper extension is being loaded.

Click here to try this step again.

I went into the php ini file and I "think" i unedited the line for MySQL. (not sure)

I checked the path on my computer and it is set for the PHP and MYSql diectories.

Can someone help me with this?

In the past the person who set up MYSQL for us did it by remore access (another volunteer) and he's not familiar with PHO or SMF... help.
« Last Edit: June 10, 2008, 01:20:03 PM by agentx42 »

Offline 青山 素子

  • Server Team
  • SMF Super Hero
  • *
  • Posts: 16,511
  • 戦場ヶ原、蕩れ!
    • motokochan on GitHub
    • @motokochan on Twitter
    • Animeneko Network
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #1 on: June 10, 2008, 12:52:50 PM »
Having issues trying to load that page you provided (it times out).

If you are installing PHP5 on Windows, you must follow the instructions in the MySQL Install section of the PHP Manual to get MySQL support working.

You can download status.php from the sticky in this board, and I believe also the download area on this site. You don't need it at the moment, however.

Also, unless you will be running JSP applications on the server, you do not need Tomcat.
Motoko-chan
Director, Simple Machines

Just like... making of enemies / 負ける気しない やめるきない / You are cool but fool - Charisma.com 『HATE』

Note: I am not a member of the Simple Machines Forum project.


Offline agentx42

  • Semi-Newbie
  • *
  • Posts: 44
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #2 on: June 10, 2008, 01:09:30 PM »
Thanks for the response. I can't figure out why the link isn't working.

try: www.cai.servebbs.org and see if you get a page.

For some reason I'm getting a message saying Port 8080 (TOMCAT) is open but port 80 is closed although the page link I just sent you is running on the Apache server (port 80).

 I thought I followed the instructions in the PHP manual but being a novice I may have misunderstood something. I can send the PHP.ini file if it will help.

My machine is also set up for rmote access, but I'd prefer to send that connect info over a private email.

here are the results of the test script.

Code: [Select]
PHP Version 5.2.6

System  Windows NT PIFONLINE 5.2 build 3790 
Build Date  May 2 2008 18:01:20 
Configure Command  cscript /nologo configure.js "--enable-snapshot-build" "--with-gd=shared" "--with-extra-includes=C:\Program Files (x86)\Microsoft SDK\Include;C:\PROGRA~2\MICROS~2\VC98\ATL\INCLUDE;C:\PROGRA~2\MICROS~2\VC98\INCLUDE;C:\PROGRA~2\MICROS~2\VC98\MFC\INCLUDE" "--with-extra-libs=C:\Program Files (x86)\Microsoft SDK\Lib;C:\PROGRA~2\MICROS~2\VC98\LIB;C:\PROGRA~2\MICROS~2\VC98\MFC\LIB" 
Server API  Apache 2.0 Handler 
Virtual Directory Support  enabled 
Configuration File (php.ini) Path  C:\WINDOWS 
Loaded Configuration File  (none) 
PHP API  20041225 
PHP Extension  20060613 
Zend Extension  220060519 
Debug Build  no 
Thread Safety  enabled 
Zend Memory Manager  enabled 
IPv6 Support  enabled 
Registered PHP Streams  php, file, data, http, ftp, compress.zlib 
Registered Stream Socket Transports  tcp, udp 
Registered Stream Filters  convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, zlib.* 

 This program makes use of the Zend Scripting Language Engine:
Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies
 


--------------------------------------------------------------------------------

PHP Credits

--------------------------------------------------------------------------------

Configuration
PHP Core
Directive Local Value Master Value
allow_call_time_pass_reference On On
allow_url_fopen On On
allow_url_include Off Off
always_populate_raw_post_data Off Off
arg_separator.input & &
arg_separator.output & &
asp_tags Off Off
auto_append_file no value no value
auto_globals_jit On On
auto_prepend_file no value no value
browscap no value no value
default_charset no value no value
default_mimetype text/html text/html
define_syslog_variables Off Off
disable_classes no value no value
disable_functions no value no value
display_errors On On
display_startup_errors Off Off
doc_root no value no value
docref_ext no value no value
docref_root no value no value
enable_dl On On
error_append_string no value no value
error_log no value no value
error_prepend_string no value no value
error_reporting no value no value
expose_php On On
extension_dir C:\php5 C:\php5
file_uploads On On
highlight.bg #FFFFFF #FFFFFF
highlight.comment #FF8000 #FF8000
highlight.default #0000BB #0000BB
highlight.html #000000 #000000
highlight.keyword #007700 #007700
highlight.string #DD0000 #DD0000
html_errors On On
ignore_repeated_errors Off Off
ignore_repeated_source Off Off
ignore_user_abort Off Off
implicit_flush Off Off
include_path .;C:\php5\pear .;C:\php5\pear
log_errors Off Off
log_errors_max_len 1024 1024
magic_quotes_gpc On On
magic_quotes_runtime Off Off
magic_quotes_sybase Off Off
mail.force_extra_parameters no value no value
max_execution_time 30 30
max_input_nesting_level 64 64
max_input_time -1 -1
memory_limit 128M 128M
open_basedir no value no value
output_buffering 0 0
output_handler no value no value
post_max_size 8M 8M
precision 14 14
realpath_cache_size 16K 16K
realpath_cache_ttl 120 120
register_argc_argv On On
register_globals Off Off
register_long_arrays On On
report_memleaks On On
report_zend_debug On On
safe_mode Off Off
safe_mode_exec_dir no value no value
safe_mode_gid Off Off
safe_mode_include_dir no value no value
sendmail_from no value no value
sendmail_path no value no value
serialize_precision 100 100
short_open_tag On On
SMTP localhost localhost
smtp_port 25 25
sql.safe_mode Off Off
track_errors Off Off
unserialize_callback_func no value no value
upload_max_filesize 2M 2M
upload_tmp_dir no value no value
user_dir no value no value
variables_order EGPCS EGPCS
xmlrpc_error_number 0 0
xmlrpc_errors Off Off
y2k_compliance On On
zend.ze1_compatibility_mode Off Off


apache2handler
Apache Version  Apache/2.2.8 (Win32) PHP/5.2.6 
Apache API Version  20051115 
Server Administrator  partners@partners-international.org 
Hostname:Port  PIFOnline.hr.cox.net:0 
Max Requests  Per Child: 0 - Keep Alive: on - Max Per Connection: 100 
Timeouts  Connection: 300 - Keep-Alive: 5 
Virtual Server  No 
Server Root  C:/Program Files/Apache Software Foundation/Apache2.2 
Loaded Modules  core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_cgi mod_dir mod_env mod_include mod_isapi mod_log_config mod_mime mod_negotiation mod_setenvif mod_php5 

Directive Local Value Master Value
engine 1 1
last_modified 0 0
xbithack 0 0


Apache Environment
Variable Value
HTTP_ACCEPT  image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */* 
HTTP_ACCEPT_LANGUAGE  en-us 
HTTP________________  ----- ------- 
HTTP_USER_AGENT  Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727) 
HTTP_HOST  www.cai.servebbs.org 
HTTP_CONNECTION  Keep-Alive 
HTTP_COOKIE  yazdLastVisited=1213049053717 
PATH  C:\PHP\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem 
SystemRoot  C:\WINDOWS 
COMSPEC  C:\WINDOWS\system32\cmd.exe 
PATHEXT  .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH 
WINDIR  C:\WINDOWS 
SERVER_SIGNATURE  no value 
SERVER_SOFTWARE  Apache/2.2.8 (Win32) PHP/5.2.6 
SERVER_NAME  www.cai.servebbs.org 
SERVER_ADDR  192.168.1.100 
SERVER_PORT  80 
REMOTE_ADDR  192.168.1.1 
DOCUMENT_ROOT  C:/Program Files/Apache Software Foundation/Apache2.2/htdocs 
SERVER_ADMIN  partners@partners-international.org 
SCRIPT_FILENAME  C:/Program Files/Apache Software Foundation/Apache2.2/htdocs/test.php 
REMOTE_PORT  2049 
GATEWAY_INTERFACE  CGI/1.1 
SERVER_PROTOCOL  HTTP/1.1 
REQUEST_METHOD  GET 
QUERY_STRING  no value 
REQUEST_URI  /test.php 
SCRIPT_NAME  /test.php 


HTTP Headers Information
HTTP Request Headers
HTTP Request  GET /test.php HTTP/1.1 
Accept  image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */* 
Accept-Language  en-us 
---------------  ----- ------- 
User-Agent  Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727) 
Host  www.cai.servebbs.org 
Connection  Keep-Alive 
Cookie  yazdLastVisited=1213049053717 
HTTP Response Headers
X-Powered-By  PHP/5.2.6 
Keep-Alive  timeout=5, max=100 
Connection  Keep-Alive 
Transfer-Encoding  chunked 
Content-Type  text/html 


bcmath
BCMath support  enabled 


calendar
Calendar support  enabled 


com_dotnet
COM support enabled
DCOM support disabled
.Net support enabled

Directive Local Value Master Value
com.allow_dcom 0 0
com.autoregister_casesensitive 1 1
com.autoregister_typelib 0 0
com.autoregister_verbose 0 0
com.code_page no value no value
com.typelib_file no value no value


ctype
ctype functions  enabled 


date
date/time support  enabled 
"Olson" Timezone Database Version  2008.2 
Timezone Database  internal 
Default timezone  America/New_York 

Directive Local Value Master Value
date.default_latitude 31.7667 31.7667
date.default_longitude 35.2333 35.2333
date.sunrise_zenith 90.583333 90.583333
date.sunset_zenith 90.583333 90.583333
date.timezone no value no value


dom
DOM/XML  enabled 
DOM/XML API Version  20031129 
libxml Version  2.6.32 
HTML Support  enabled 
XPath Support  enabled 
XPointer Support  enabled 
Schema Support  enabled 
RelaxNG Support  enabled 


filter
Input Validation and Filtering  enabled 
Revision  $Revision: 1.52.2.42 $ 

Directive Local Value Master Value
filter.default unsafe_raw unsafe_raw
filter.default_flags no value no value


ftp
FTP support  enabled 


hash
hash support  enabled 
Hashing Engines  md2 md4 md5 sha1 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru gost adler32 crc32 crc32b haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5 


iconv
iconv support  enabled 
iconv implementation  "libiconv" 
iconv library version  1.11 

Directive Local Value Master Value
iconv.input_encoding ISO-8859-1 ISO-8859-1
iconv.internal_encoding ISO-8859-1 ISO-8859-1
iconv.output_encoding ISO-8859-1 ISO-8859-1


json
json support  enabled 
json version  1.2.1 


libxml
libXML support  active 
libXML Version  2.6.32 
libXML streams  enabled 


odbc
ODBC Support enabled
Active Persistent Links  0 
Active Links  0 
ODBC library  Win32 

Directive Local Value Master Value
odbc.allow_persistent On On
odbc.check_persistent On On
odbc.default_db no value no value
odbc.default_pw no value no value
odbc.default_user no value no value
odbc.defaultbinmode return as is return as is
odbc.defaultlrl return up to 4096 bytes return up to 4096 bytes
odbc.max_links Unlimited Unlimited
odbc.max_persistent Unlimited Unlimited


pcre
PCRE (Perl Compatible Regular Expressions) Support  enabled 
PCRE Library Version  7.6 2008-01-28 

Directive Local Value Master Value
pcre.backtrack_limit 100000 100000
pcre.recursion_limit 100000 100000


Reflection
Reflection enabled
Version  $Id: php_reflection.c,v 1.164.2.33.2.50 2008/03/13 15:56:21 iliaa Exp $ 


session
Session Support  enabled 
Registered save handlers  files user 
Registered serializer handlers  php php_binary wddx 

Directive Local Value Master Value
session.auto_start Off Off
session.bug_compat_42 On On
session.bug_compat_warn On On
session.cache_expire 180 180
session.cache_limiter nocache nocache
session.cookie_domain no value no value
session.cookie_httponly Off Off
session.cookie_lifetime 0 0
session.cookie_path / /
session.cookie_secure Off Off
session.entropy_file no value no value
session.entropy_length 0 0
session.gc_divisor 100 100
session.gc_maxlifetime 1440 1440
session.gc_probability 1 1
session.hash_bits_per_character 4 4
session.hash_function 0 0
session.name PHPSESSID PHPSESSID
session.referer_check no value no value
session.save_handler files files
session.save_path no value no value
session.serialize_handler php php
session.use_cookies On On
session.use_only_cookies Off Off
session.use_trans_sid 0 0


SimpleXML
Simplexml support enabled
Revision  $Revision: 1.151.2.22.2.39 $ 
Schema support  enabled 


SPL
SPL support enabled
Interfaces  Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject 
Classes  AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilterIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RegexIterator, RuntimeException, SimpleXMLIterator, SplFileInfo, SplFileObject, SplObjectStorage, SplTempFileObject, UnderflowException, UnexpectedValueException 


standard
Regex Library  Bundled library enabled 
Dynamic Library Support  enabled 
Internal Sendmail Support for Windows  enabled 

Directive Local Value Master Value
assert.active 1 1
assert.bail 0 0
assert.callback no value no value
assert.quiet_eval 0 0
assert.warning 1 1
auto_detect_line_endings 0 0
default_socket_timeout 60 60
safe_mode_allowed_env_vars PHP_ PHP_
safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH
url_rewriter.tags a=href,area=href,frame=src,form=,fieldset= a=href,area=href,frame=src,form=,fieldset=
user_agent no value no value


tokenizer
Tokenizer Support  enabled 


wddx
WDDX Support enabled
WDDX Session Serializer  enabled 


xml
XML Support  active 
XML Namespace Support  active 
libxml2 Version  2.6.32 


xmlreader
XMLReader  enabled 


xmlwriter
XMLWriter  enabled 


zlib
ZLib Support  enabled 
Stream Wrapper support  compress.zlib:// 
Stream Filter support  zlib.inflate, zlib.deflate 
Compiled Version  1.2.3 
Linked Version  1.2.3 

Directive Local Value Master Value
zlib.output_compression Off Off
zlib.output_compression_level -1 -1
zlib.output_handler no value no value


Additional Modules
Module Name


Environment
Variable Value
ALLUSERSPROFILE  C:\Documents and Settings\All Users 
classpath  .;C:\Program Files\Apache Software Foundation\Tomcat 6.0\libr\mysql-connector-java.jar; 
ClusterLog  C:\WINDOWS\Cluster\cluster.log 
CommonProgramFiles  C:\Program Files\Common Files 
COMPUTERNAME  PIFONLINE 
ComSpec  C:\WINDOWS\system32\cmd.exe 
FP_NO_HOST_CHECK  NO 
MIBDIRS  \mibs 
NUMBER_OF_PROCESSORS  2 
OS  Windows_NT 
Path  C:\PHP\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem 
PATHEXT  .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH 
PHPRC  C:\PHP\ 
PROCESSOR_ARCHITECTURE  x86 
PROCESSOR_IDENTIFIER  x86 Family 6 Model 8 Stepping 6, GenuineIntel 
PROCESSOR_LEVEL  6 
PROCESSOR_REVISION  0806 
ProgramFiles  C:\Program Files 
SystemDrive  C: 
SystemRoot  C:\WINDOWS 
TEMP  C:\WINDOWS\TEMP 
TMP  C:\WINDOWS\TEMP 
USERPROFILE  C:\Documents and Settings\Default User 
windir  C:\WINDOWS 
AP_PARENT_PID  3280 


PHP Variables
Variable Value
_REQUEST["yazdLastVisited"] 1213049053717
_COOKIE["yazdLastVisited"] 1213049053717
_SERVER["HTTP_ACCEPT"] image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
_SERVER["HTTP_ACCEPT_LANGUAGE"] en-us
_SERVER["HTTP________________"] ----- -------
_SERVER["HTTP_USER_AGENT"] Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)
_SERVER["HTTP_HOST"] www.cai.servebbs.org
_SERVER["HTTP_CONNECTION"] Keep-Alive
_SERVER["HTTP_COOKIE"] yazdLastVisited=1213049053717
_SERVER["PATH"] C:\PHP\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
_SERVER["SystemRoot"] C:\WINDOWS
_SERVER["COMSPEC"] C:\WINDOWS\system32\cmd.exe
_SERVER["PATHEXT"] .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
_SERVER["WINDIR"] C:\WINDOWS
_SERVER["SERVER_SIGNATURE"] no value
_SERVER["SERVER_SOFTWARE"] Apache/2.2.8 (Win32) PHP/5.2.6
_SERVER["SERVER_NAME"] www.cai.servebbs.org
_SERVER["SERVER_ADDR"] 192.168.1.100
_SERVER["SERVER_PORT"] 80
_SERVER["REMOTE_ADDR"] 192.168.1.1
_SERVER["DOCUMENT_ROOT"] C:/Program Files/Apache Software Foundation/Apache2.2/htdocs
_SERVER["SERVER_ADMIN"] partners@partners-international.org
_SERVER["SCRIPT_FILENAME"] C:/Program Files/Apache Software Foundation/Apache2.2/htdocs/test.php
_SERVER["REMOTE_PORT"] 2049
_SERVER["GATEWAY_INTERFACE"] CGI/1.1
_SERVER["SERVER_PROTOCOL"] HTTP/1.1
_SERVER["REQUEST_METHOD"] GET
_SERVER["QUERY_STRING"] no value
_SERVER["REQUEST_URI"] /test.php
_SERVER["SCRIPT_NAME"] /test.php
_SERVER["PHP_SELF"] /test.php
_SERVER["REQUEST_TIME"] 1213117545
_SERVER["argv"] Array
(
)
 
_SERVER["argc"] 0
_ENV["ALLUSERSPROFILE"] C:\Documents and Settings\All Users
_ENV["classpath"] .;C:\Program Files\Apache Software Foundation\Tomcat 6.0\libr\mysql-connector-java.jar;
_ENV["ClusterLog"] C:\WINDOWS\Cluster\cluster.log
_ENV["CommonProgramFiles"] C:\Program Files\Common Files
_ENV["COMPUTERNAME"] PIFONLINE
_ENV["ComSpec"] C:\WINDOWS\system32\cmd.exe
_ENV["FP_NO_HOST_CHECK"] NO
_ENV["MIBDIRS"] \mibs
_ENV["NUMBER_OF_PROCESSORS"] 2
_ENV["OS"] Windows_NT
_ENV["Path"] C:\PHP\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
_ENV["PATHEXT"] .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
_ENV["PHPRC"] C:\PHP\
_ENV["PROCESSOR_ARCHITECTURE"] x86
_ENV["PROCESSOR_IDENTIFIER"] x86 Family 6 Model 8 Stepping 6, GenuineIntel
_ENV["PROCESSOR_LEVEL"] 6
_ENV["PROCESSOR_REVISION"] 0806
_ENV["ProgramFiles"] C:\Program Files
_ENV["SystemDrive"] C:
_ENV["SystemRoot"] C:\WINDOWS
_ENV["TEMP"] C:\WINDOWS\TEMP
_ENV["TMP"] C:\WINDOWS\TEMP
_ENV["USERPROFILE"] C:\Documents and Settings\Default User
_ENV["windir"] C:\WINDOWS
_ENV["AP_PARENT_PID"] 3280


PHP License
This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact license@php.net.


« Last Edit: July 02, 2008, 05:14:07 AM by Rumbaar »

Offline 青山 素子

  • Server Team
  • SMF Super Hero
  • *
  • Posts: 16,511
  • 戦場ヶ原、蕩れ!
    • motokochan on GitHub
    • @motokochan on Twitter
    • Animeneko Network
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #3 on: June 10, 2008, 01:37:23 PM »
For some reason I'm getting a message saying Port 8080 (TOMCAT) is open but port 80 is closed although the page link I just sent you is running on the Apache server (port 80).

If you are running on a residential connection with Cox, they block inbound port 80. If you are on a business connection, they don't.


My machine is also set up for rmote access, but I'd prefer to send that connect info over a private email.

That is fine, but I'm a bit busy today at work with a server migration for a big client, so I probably won't be able to try any hands-on help until the weekend at best.


here are the results of the test script.

PHP Version 5.2.6

** snip **

If there is no "mysql" section, then you don't have it set up properly. From the output you pasted, that section doesn't exist. Make sure to read the manual very carefully, there are a few steps in this, and you have to restart Apache HTTPd if you are running PHP as a module, which you are.

  • Put the location of libmysql.dll on your path.
  • Enable the mysql extension inside php.ini
  • Make sure to set the right path for the extension directory
  • Restart Apache HTTPd if running PHP as a module

While enabling modules, you might also want to enable the gd module. You will also need to set the proper SMTP relay for PHP to use when sending mail as Windows doesn't have a built-in sendmail command.
Motoko-chan
Director, Simple Machines

Just like... making of enemies / 負ける気しない やめるきない / You are cool but fool - Charisma.com 『HATE』

Note: I am not a member of the Simple Machines Forum project.


Offline agentx42

  • Semi-Newbie
  • *
  • Posts: 44
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #4 on: June 10, 2008, 01:49:29 PM »
Thankls I'll try that and post the results. Let me know when you have any "hands on" time. 

I'm on COX residential, so should I try to get Apahe to look at port 8080? That is what Tomcat is running and people have no problem hitting the server on port 8080

http://www.cai.servebbs.org:8080/

This is on the pache server port 80 that people seem able to hit as well:

http://www.cai.servebbs.org:80

Offline 青山 素子

  • Server Team
  • SMF Super Hero
  • *
  • Posts: 16,511
  • 戦場ヶ原、蕩れ!
    • motokochan on GitHub
    • @motokochan on Twitter
    • Animeneko Network
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #5 on: June 10, 2008, 02:56:41 PM »
I'm on COX residential, so should I try to get Apahe to look at port 8080? That is what Tomcat is running and people have no problem hitting the server on port 8080

Probably because it isn't a default port and Cox isn't blocking it inbound. They do block normal port 80 (http) on their residential connections. I highly advise not running a server on their residential connections, it is against their AUP and can get you banned from their service.

I'll be glad to try and help, but you should know about the possible repercussions of that. Yes, you can try to get Apache to listen on an alternate port to troubleshoot.
Motoko-chan
Director, Simple Machines

Just like... making of enemies / 負ける気しない やめるきない / You are cool but fool - Charisma.com 『HATE』

Note: I am not a member of the Simple Machines Forum project.


Offline agentx42

  • Semi-Newbie
  • *
  • Posts: 44
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #6 on: June 10, 2008, 03:13:02 PM »
Ok. I'll check with them. If We need to upgrade the service we can.

We've had a webdrive up for about a year or so and they have not given us any problem. Probably because it is for a non-profit and the traffic is so low (as it will be with this) with just connecting remote fokes on a project so they can communicate.

Offline 青山 素子

  • Server Team
  • SMF Super Hero
  • *
  • Posts: 16,511
  • 戦場ヶ原、蕩れ!
    • motokochan on GitHub
    • @motokochan on Twitter
    • Animeneko Network
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #7 on: June 10, 2008, 03:33:49 PM »
We've had a webdrive up for about a year or so and they have not given us any problem. Probably because it is for a non-profit and the traffic is so low (as it will be with this) with just connecting remote fokes on a project so they can communicate.

Quite possibly. It could also just be the different port number too. Let me know if you need any more help getting the mysql extension working.
Motoko-chan
Director, Simple Machines

Just like... making of enemies / 負ける気しない やめるきない / You are cool but fool - Charisma.com 『HATE』

Note: I am not a member of the Simple Machines Forum project.


Offline agentx42

  • Semi-Newbie
  • *
  • Posts: 44
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #8 on: June 10, 2008, 03:43:25 PM »
I'm definately stuck on getting the MYSQL working.

I went through the documentation and did eveything I saw they weresaying to do.

I'm sure I'm missing something real simple, but for the life of me I can't figure it out.  I can send you the INI files or give you remote access when you have time to tinket with it.  Whatever is easier.


Offline vbgamer45

  • SMF Friend
  • SMF Super Hero
  • *
  • Posts: 16,403
    • smfhacks on Facebook
    • VBGAMER45 on GitHub
    • @createaforum on Twitter
    • SMF For Free
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #9 on: June 12, 2008, 09:40:05 PM »
Post your php.ini

Also what is the location of your extension directory

That plays an important part and is set under extension_dir   in the php.ini
Community Suite - Take your forum to the next level built for SMF, Gallery,Store,Classfieds,Downloads,more!

SMFHacks.com -  Paid Modifications for SMF

Latest Mod:
EzPortal - Portal System for SMF
Newsletter Pro SMF Gallery Pro SMF Classifieds SMF Store

Offline Night09

  • SMF Hero
  • ******
  • Posts: 1,522
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #10 on: June 12, 2008, 10:21:23 PM »
To make Apache listen on other ports open httpd.conf and look for

Listen 80  Add a line below for any other ports you want
Listen 8080  This will make it use 8080 as well

Also if you left click your apache icon mouse up to apache and you should see the option to test port 80.It will then tell you for sure what is using it.

Also make sure to restart apache after making config changes or it will not see them as it only reads the files when it starts up.

Offline agentx42

  • Semi-Newbie
  • *
  • Posts: 44
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #11 on: June 12, 2008, 10:25:38 PM »
Beat with me. I'm not the greatest at this. We have our donated machine set up so that we let volunteers remote access it to help with the programming, so I'm not the sharpest pencil inthe box on getting into this.

I'm not sure what you mean by the extension directory, bur this is what I found that seems like it. it is for a directory in the PHO folder called "ext" which I assume stands for extensions:

C:\Program Files\Apache Software Foundation\Apache2.2\PHP\ext

php.ini follows

Code: [Select]
[PHP]

;;;;;;;;;;;;;;;;;;;
; About php.ini   ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior.  In order for PHP to
; read it, it must be named 'php.ini'.  PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory.  The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple.  Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and parentheses:
; |        bitwise OR
; &        bitwise AND
; ~        bitwise NOT
; !        boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
;
;  foo =         ; sets foo to an empty string
;  foo = none    ; sets foo to an empty string
;  foo = "none"  ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
;
;
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; This is the recommended, PHP 5-style version of the php.ini-dist file.  It
; sets some non standard settings, that make PHP more efficient, more secure,
; and encourage cleaner coding.
;
; The price is that with these settings, PHP may be incompatible with some
; applications, and sometimes, more difficult to develop with.  Using this
; file is warmly recommended for production sites.  As all of the changes from
; the standard settings are thoroughly documented, you can go over each one,
; and decide whether you want to use it or not.
;
; For general information about the php.ini file, please consult the php.ini-dist
; file, included in your PHP distribution.
;
; This file is different from the php.ini-dist file in the fact that it features
; different values for several directives, in order to improve performance, while
; possibly breaking compatibility with the standard out-of-the-box behavior of
; PHP.  Please make sure you read what's different, and modify your scripts
; accordingly, if you decide to use this file instead.
;
; - register_long_arrays = Off     [Performance]
;     Disables registration of the older (and deprecated) long predefined array
;     variables ($HTTP_*_VARS).  Instead, use the superglobals that were
;     introduced in PHP 4.1.0
; - display_errors = Off           [Security]
;     With this directive set to off, errors that occur during the execution of
;     scripts will no longer be displayed as a part of the script output, and thus,
;     will no longer be exposed to remote users.  With some errors, the error message
;     content may expose information about your script, web server, or database
;     server that may be exploitable for hacking.  Production sites should have this
;     directive set to off.
; - log_errors = On                [Security]
;     This directive complements the above one.  Any errors that occur during the
;     execution of your script will be logged (typically, to your server's error log,
;     but can be configured in several ways).  Along with setting display_errors to off,
;     this setup gives you the ability to fully understand what may have gone wrong,
;     without exposing any sensitive information to remote users.
; - output_buffering = 4096        [Performance]
;     Set a 4KB output buffer.  Enabling output buffering typically results in less
;     writes, and sometimes less packets sent on the wire, which can often lead to
;     better performance.  The gain this directive actually yields greatly depends
;     on which Web server you're working with, and what kind of scripts you're using.
; - register_argc_argv = Off       [Performance]
;     Disables registration of the somewhat redundant $argv and $argc global
;     variables.
; - magic_quotes_gpc = Off         [Performance]
;     Input data is no longer escaped with slashes so that it can be sent into
;     SQL databases without further manipulation.  Instead, you should use the
;     function addslashes() on each input element you wish to send to a database.
; - variables_order = "GPCS"       [Performance]
;     The environment variables are not hashed into the $_ENV.  To access
;     environment variables, you can use getenv() instead.
; - error_reporting = E_ALL        [Code Cleanliness, Security(?)]
;     By default, PHP suppresses errors of type E_NOTICE.  These error messages
;     are emitted for non-critical errors, but that could be a symptom of a bigger
;     problem.  Most notably, this will cause error messages about the use
;     of uninitialized variables to be displayed.
; - allow_call_time_pass_reference = Off     [Code cleanliness]
;     It's not possible to decide to force a variable to be passed by reference
;     when calling a function.  The PHP 4 style to do this is by making the
;     function require the relevant argument by reference.
; - short_open_tag = ON           [Portability]
;     Using short tags is discouraged when developing code meant for redistribution
;     since short tags may not be supported on the target server.

;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
engine = On

; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off

; Allow the <? tag.  Otherwise, only <?php and <scripttags are recognized.
NOTEUsing short tags should be avoided when developing applications or
libraries that are meant for redistribution, or deployment on PHP
servers which are not under your controlbecause short tags may not
be supported on the target server. For portableredistributable code,
be sure not to use short tags.
short_open_tag Off

Allow ASP-style <% %> tags.
asp_tags Off

The number of significant digits displayed in floating point numbers.
precision    =  14

Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance On

Output buffering allows you to send header lines (including cookieseven
after you send body contentat the price of slowing PHP's output layer a
; bit.  You can enable output buffering during runtime by calling the output
; buffering functions.  You can also enable output buffering for all files by
; setting this directive to On.  If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of '
On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = 4096

; You can redirect all of the output of your scripts to a function.  For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
;       directive. Instead, explicitly set the output handler using ob_start().
;       Using this ini directive may cause problems unless you know what script
;       is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
;       and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set '
On' !!!!
;       Instead you must use zlib.output_handler.
;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are '
off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
;       outputs chunks that are few hundreds bytes each as a result of
;       compression. If you prefer a larger chunk size for better
;       performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
;       output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
;zlib.output_compression_level = -1

; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block.  This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block.  Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off

; The unserialize callback function will be called (with the undefined class'
name as parameter), if the unserializer finds an undefined class
which should be instantiated.
A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=

; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100

; Whether to enable the ability to force arguments to be passed by reference
; at function call time.  This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend.  The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration.  You'
re encouraged to try and turn this option Off and make
sure your scripts work properly with it in order to ensure they will work
with future versions of the language (you will receive a warning each time
you use this feature, and the argument will be passed by value instead of by
reference).
allow_call_time_pass_reference Off

;
Safe Mode
;
safe_mode Off

By default, Safe Mode does a UID compare check when
opening files. If you want to relax this to a GID compare,
then turn on safe_mode_gid.
safe_mode_gid Off

When safe_mode is onUID/GID checks are bypassed when
including files from this directory and its subdirectories.
; (
directory must also be in include_path or full path must
be used when including)
safe_mode_include_dir =

When safe_mode is ononly executables located in the safe_mode_exec_dir
will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =

Setting certain environment variables may be a potential security breach.
This directive contains a comma-delimited list of prefixes.  In Safe Mode,
the user may only alter environment variables whose names begin with the
prefixes supplied here.  By default, users will only be able to set
environment variables that begin with PHP_ (e.gPHP_FOO=BAR).
;
Note:  If this directive is empty, PHP will let the user modify ANY
environment variable!
safe_mode_allowed_env_vars PHP_

This directive contains a comma-delimited list of environment variables that
the end user won't be able to change using putenv().  These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined directory
; and below.  This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
;open_basedir =

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =

; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =

; Colors for Syntax Highlighting mode.  Anything that'
s acceptable in
; <span style="color: ???????"would work.
;
highlight.string  #DD0000
;highlight.comment #FF9900
;highlight.keyword #007700
;highlight.bg      #FFFFFF
;highlight.default = #0000BB
;highlight.html    #000000

; If enabledthe request will be allowed to complete even if the user aborts
the requestConsider enabling it if executing long requestwhich may end up
being interrupted by the user or a browser timing out.
ignore_user_abort On

Determines the size of the realpath cache to be used by PHPThis value should
be increased on systems where PHP opens many files to reflect the quantity of
the file operations performed.
realpath_cache_size=16k

Duration of timein seconds for which to cache realpath information for a given
file or directory. For systems with rarely changing filesconsider increasing this
value.
realpath_cache_ttl=120

;
Misc
;
Decides whether PHP may expose the fact that it is installed on the server
; (e.gby adding its signature to the Web server header).  It is no security
threat in any waybut it makes it possible to determine whether you use PHP
on your server or not.
expose_php On


;;;;;;;;;;;;;;;;;;;
Resource Limits ;
;;;;;;;;;;;;;;;;;;;

max_execution_time 30     Maximum execution time of each scriptin seconds
max_input_time 
60 Maximum amount of time each script may spend parsing request data
;max_input_nesting_level 64 Maximum input variable nesting level
memory_limit 
128M      Maximum amount of memory a script may consume (128MB)


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

error_reporting is a bit-field.  Or each number up to get desired error
reporting level
E_ALL             All errors and warnings (doesn't include E_STRICT)
; E_ERROR           - fatal run-time errors
; E_RECOVERABLE_ERROR  - almost fatal run-time errors
; E_WARNING         - run-time warnings (non-fatal errors)
; E_PARSE           - compile-time parse errors
; E_NOTICE          - run-time notices (these are warnings which often result
;                     from a bug in your code, but it'
s possible that it was
;                     intentional (e.g., using an uninitialized variable and
;                     
relying on the fact it's automatically initialized to an
;                     empty string)
; E_STRICT          - run-time notices, enable to have PHP suggest changes
;                     to your code which will ensure the best interoperability
;                     and forward compatibility of your code
; E_CORE_ERROR      - fatal errors that occur during PHP'
s initial startup
E_CORE_WARNING    warnings (non-fatal errorsthat occur during PHP's
;                     initial startup
; E_COMPILE_ERROR   - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR      - user-generated error message
; E_USER_WARNING    - user-generated warning message
; E_USER_NOTICE     - user-generated notice message
;
; Examples:
;
;   - Show all errors, except for notices and coding standards warnings
;
;error_reporting = E_ALL & ~E_NOTICE
;
;   - Show all errors, except for notices
;
;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
;
;   - Show only errors
;
;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
;
;   - Show all errors, except coding standards warnings
;
error_reporting  =  E_ALL

; Print out errors (as a part of the output).  For production web sites,
; you'
re strongly encouraged to turn this feature off, and use error logging
instead (see below).  Keeping display_errors enabled on a production web site
may reveal security information to end userssuch as file paths on your Web
serveryour database schema or other information.
;
possible values for display_errors:
;
Off          - Do not display any errors 
stderr       Display errors to STDERR (affects only CGI/CLI binaries!)   
On or stdout Display errors to STDOUT (default)
;  
To output errors to STDERR with CGI/CLI:              
;
display_errors "stderr"
;
; Default
;
display_errors Off

Even when display_errors is onerrors that occur during PHP's startup
; sequence are not displayed.  It'
s strongly recommended to keep
display_startup_errors offexcept for when debugging.
display_startup_errors Off

Log errors into a log file (server-specific logstderr, or error_log (below))
; As 
stated aboveyou're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = On

; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same file on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On

;report_zend_debug = 0

; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off

; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off

; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '
/'. You must also specify the file extension being used including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html

; String to output before an error message.
;error_prepend_string = "<font color=#ff0000>"

; String to output after an error message.
;error_append_string = "</font>"

; Log errors to specified file.
;error_log = filename

; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog


;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&amp;"

; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"

; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC).  Registration is done from left to right, newer
; values override older values.
variables_order = "GPCS"

; Whether or not to register the EGPCS variables as global variables.  You may
; want to turn this off if you don'
t want to clutter your scripts' global scope
; with user data.  This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do not require
; register_globals to be on;  Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off

; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends.  If you'
re not using themit's recommended to turn them off,
; for performance reasons.
register_long_arrays = Off

; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information).  If you don'
use these variablesyou
should turn it off for increased performance.
register_argc_argv Off

When enabledthe SERVER and ENV variables are created when they're first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
auto_globals_jit = On

; Maximum size of POST data that PHP will accept.
post_max_size = 8M

; Magic quotes
;

; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = Off

; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ' 
with '' instead of \').
magic_quotes_sybase = Off

; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =

; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header.  To disable sending of the charset, simply
; set it to be empty.
;
; PHP'
s built-in default is text/html
default_mimetype 
"text/html"
;default_charset "iso-8859-1"

Always populate the $HTTP_RAW_POST_DATA variable.
;
always_populate_raw_post_data On


;;;;;;;;;;;;;;;;;;;;;;;;;
Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

UNIX"/path1:/path2"
;include_path ".:/php/includes"
;
Windows"\path1;\path2"
;include_path ".;c:\php\includes"

The root of the PHP pagesused only if nonempty.
; if 
PHP was not compiled with FORCE_REDIRECTyou SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
see documentation for security issues.  The alternate is to use the
cgi.force_redirect configuration below
doc_root 
=

The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =

Directory in which the loadable extensions (modulesreside.
extension_dir "./"

Whether or not to enable the dl() function.  The dl() function does NOT work
properly in multithreaded serverssuch as IIS or Zeus, and is automatically
disabled on them.
enable_dl On

cgi.force_redirect is necessary to provide security running PHP as a CGI under
most web servers.  Left undefinedPHP turns this on by default.  You can
turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IISin factyou MUST.**
cgi.force_redirect 1

; if cgi.nph is enabled it will force cgi to always sent Status200 with
every request.
cgi.nph 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanetweb serversyou MAY need to set an environment variable name that PHP
will look for to know it is OK to continue execution.  Setting this variable MAY
cause security issuesKNOW WHAT YOU ARE DOING FIRST.
cgi.redirect_status_env = ;

cgi.fix_pathinfo provides *realPATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
; this to 1 will cause PHP CGI to fix it'
s paths to conform to the spec.  A setting
of zero causes PHP to behave as before.  Default is 1.  You should fix your scripts
to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
cgi.fix_pathinfo=1

FastCGI under IIS (on WINNT based OSsupports the ability to impersonate
security tokens of the calling client.  This allows IIS to define the
security context that the request runs under.  mod_fastcgi under Apache
does not currently support this feature (03/17/2002)
Set to 1 if running under IIS.  Default is zero.
fastcgi.impersonate 1;

Disable logging through FastCGI connection
fastcgi.logging 0

cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0


;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
;upload_tmp_dir =

; Maximum allowed size for uploaded files.
upload_max_filesize = 2M


;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On

; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
allow_url_include = Off

; Define the anonymous ftp password (your email address)
;from="john@doe.com"

; Define the User-Agent string
; user_agent="PHP"

; Default timeout for socket based streams (seconds)
default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off


;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
;   extension=modulename.extension
;
; For example, on Windows:
;
;   extension=msql.dll
;
; ... or under UNIX:
;
;   extension=msql.so
;
; Note that it should be the name of the module only; no directory information
; needs to go here.  Specify the location of the extension with the
; extension_dir directive above.


; Windows Extensions
; Note that ODBC support is built in, so no dll is needed for it.
; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
; extension folders as well as the separate PECL DLL download (PHP 5).
; Be sure to appropriately set the extension_dir directive.

;extension=php_bz2.dll
;extension=php_curl.dll
;extension=php_dba.dll
;extension=php_dbase.dll
;extension=php_exif.dll
;extension=php_fdf.dll
;extension=php_gd2.dll
;extension=php_gettext.dll
;extension=php_gmp.dll
;extension=php_ifx.dll
;extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_ldap.dll
;extension=php_mbstring.dll
;extension=php_mcrypt.dll
;extension=php_mhash.dll
;extension=php_mime_magic.dll
;extension=php_ming.dll
;extension=php_msql.dll
;extension=php_mssql.dll
extension=php_mysql.dll
;extension=php_mysqli.dll
;extension=php_oci8.dll
;extension=php_openssl.dll
;extension=php_pdo.dll
;extension=php_pdo_firebird.dll
;extension=php_pdo_mssql.dll
;extension=php_pdo_mysql.dll
;extension=php_pdo_oci.dll
;extension=php_pdo_oci8.dll
;extension=php_pdo_odbc.dll
;extension=php_pdo_pgsql.dll
;extension=php_pdo_sqlite.dll
;extension=php_pgsql.dll
;extension=php_pspell.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_soap.dll
;extension=php_sqlite.ite.hp_snmp.dll
;extension=dll
;extension=php_sybase_ct.dll
;extension=php_tidy.dll
;extension=php_xmlrpc.dll
;extension=php_xsl.dll
;extension=php_zip.dll

;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Date]
; Defines the default timezone used by the date functions
;date.timezone =

;date.default_latitude = 31.7667
;date.default_longitude = 35.2333

;date.sunrise_zenith = 90.583333
;date.sunset_zenith = 90.583333

[filter]
;filter.default = unsafe_raw
;filter.default_flags =

[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1

[sqlite]
;sqlite.assoc_case = 0

[xmlrpc]
;xmlrpc_error_number = 0
;xmlrpc_errors = 0

[Pcre]
;PCRE library backtracking limit.
;pcre.backtrack_limit=100000

;PCRE library recursion limit. 
;Please note that if you set this value to a high number you may consume all 
;the available process stack and eventually crash PHP (due to reaching the 
;stack size limit imposed by the Operating System).
;pcre.recursion_limit=100000

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables  = Off

[mail function]
; For Win32 only.
SMTP = smtp.east.cox.net
smtp_port = 25

; For Win32 only.
sendmail_from = partners@psrtners-international.org

; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
;sendmail_path =

; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

[SQL]
sql.safe_mode = Off

[ODBC]
;odbc.default_db    =  Not yet implemented
;odbc.default_user  =  Not yet implemented
;odbc.default_pw    =  Not yet implemented

; Allow or prevent persistent links.
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
odbc.check_persistent = On

; Maximum number of persistent links.  -1 means no limit.
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
odbc.max_links = -1

; Handling of LONG fields.  Returns number of bytes to variables.  0 means
; passthru.
odbc.defaultlrl = 4096

; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1

[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
mysql.max_links = -1

; Default port number for mysql_connect().  If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
; at MYSQL_PORT.
mysql.default_port =

; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =

; Default host for mysql_connect() (doesn'
t apply in safe mode).
mysql.default_host =

; Default 
user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =

; Default password for mysql_connect() (doesn'
t apply in safe mode).
Note that this is generally a *badidea to store passwords in this file.
; *
Anyuser with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password!  And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =

; Maximum time (in seconds) for connect timeout. -1 means no limit
mysql.connect_timeout = 60

; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off

[MySQLi]

; Maximum number of links.  -1 means no limit.
mysqli.max_links = -1

; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
; at MYSQL_PORT.
mysqli.default_port = 3306

; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =

; Default host for mysql_connect() (doesn'
t apply in safe mode).
mysqli.default_host =

; Default 
user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =

; Default password for mysqli_connect() (doesn'
t apply in safe mode).
Note that this is generally a *badidea to store passwords in this file.
; *
Anyuser with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password!  And of course, any users with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
msql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
msql.max_links = -1

[OCI8]
; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
;oci8.privileged_connect = Off

; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
;oci8.max_persistent = -1

; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
;oci8.persistent_timeout = -1

; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
;oci8.ping_interval = 60

; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
;oci8.statement_cache_size = 20

; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
;oci8.default_prefetch = 10

; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
;oci8.old_oci_close_semantics = Off

[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links.  -1 means no limit.
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0

[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
sybase.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
sybase.max_links = -1

;sybase.interface_file = "/usr/sybase/interfaces"

; Minimum error severity to display.
sybase.min_error_severity = 10

; Minimum message severity to display.
sybase.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings.  This
; compatibility mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off

[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
sybct.max_links = -1

; Minimum server message severity to display.
sybct.min_server_severity = 10

; Minimum client message severity to display.
sybct.min_client_severity = 10

[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0

[browscap]
;browscap = extra/browscap.ini

[Informix]
; Default host for ifx_connect() (doesn'
t apply in safe mode).
ifx.default_host =

; Default 
user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =

; Default password for ifx_connect() (doesn'
t apply in safe mode).
ifx.default_password =

Allow or prevent persistent links.
ifx.allow_persistent On

Maximum number of persistent links.  -1 means no limit.
ifx.max_persistent = -1

Maximum number of links (persistent non-persistent).  -1 means no limit.
ifx.max_links = -1

; If onselect statements return the contents of a text blob instead of its id.
ifx.textasvarchar 0

; If onselect statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar 0

Trailing blanks are stripped from fixed-length char columns.  May help the
life of Informix SE users.
ifx.charasvarchar 0

; If onthe contents of text and byte blobs are dumped to a file instead of
keeping them in memory.
ifx.blobinfile 0

NULL's are returned as empty strings, unless this is set to 1.  In that case,
; NULL'
s are returned as string 'NULL'.
ifx.nullformat 0

[Session]
Handler used to store/retrieve data.
session.save_handler files

Argument passed to save_handler.  In the case of filesthis is the path
where data files are storedNoteWindows users have to change this
variable in order to use PHP's session functions.
;
; As of PHP 4.0.1, you can define the path as:
;
;     session.save_path = "N;/path"
;
; where N is an integer.  Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories.  This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
;         You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
;         use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
;     session.save_path = "N;MODE;/path"
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process'
s umask.
;
session.save_path "/tmp"

Whether to use cookies.
session.use_cookies 1

;session.cookie_secure =

This option enables administrators to make their users invulnerable to
attacks which involve passing session ids in URLsdefaults to 0.
session.use_only_cookies 1

Name of the session (used as cookie name).
session.name PHPSESSID

Initialize session on request startup.
session.auto_start 0

Lifetime in seconds of cookie or, if 0until browser is restarted.
session.cookie_lifetime 0

The path for which the cookie is valid.
session.cookie_path = /

The domain for which the cookie is valid.
session.cookie_domain =

Whether or not to add the httpOnly flag to the cookiewhich makes it inaccessible to browser scripting languages such as JavaScript.
session.cookie_httponly 

Handler used to serialize data.  php is the standard serializer of PHP.
session.serialize_handler php

Define the probability that the 'garbage collection' process is started
on every session initialization.
The probability is calculated by using gc_probability/gc_divisor,
e.g1/100 means there is a 1chance that the GC process starts
on each request.

session.gc_probability 1
session
.gc_divisor     1000

After this number of secondsstored data will be seen as 'garbage' and
cleaned up by the garbage collection process.
session.gc_maxlifetime 1440

NOTE: If you are using the subdirectory option for storing session files
;       (see session.save_path above), then garbage collection does *not*
;       
happen automatically.  You will need to do your own garbage
;       collection through a shell scriptcron entry, or some other method.
;       For 
examplethe following script would is the equivalent of
;       setting session.gc_maxlifetime to 1440 (1440 seconds 24 minutes):
;          
cd /path/to/sessionsfind -cmin +24 xargs rm

PHP 4.2 and less have an undocumented feature/bug that allows you to
to initialize a session variable in the global scopealbeit register_globals
is disabled.  PHP 4.3 and later will warn you, if this feature is used.
You can disable the feature and the warning separatelyAt this time,
the warning is only displayed, if bug_compat_42 is enabled.

session.bug_compat_42 0
session
.bug_compat_warn 1

Check HTTP Referer to invalidate externally stored URLs containing ids.
HTTP_REFERER has to contain this substring for the session to be
considered as valid.
session.referer_check =

How many bytes to read from the file.
session.entropy_length 0

Specified here to create the session id.
session.entropy_file =

;
session.entropy_length 16

;session.entropy_file = /dev/urandom

Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter nocache

Document expires after n minutes.
session.cache_expire 180

trans sid support is disabled by default.
; Use 
of trans sid may risk your users security.
; Use 
this option with caution.
; - 
User may send URL contains active session ID
;   to other person viaemail/irc/etc.
; - 
URL that contains active session ID may be stored
;   in publically accessible computer.
; - 
User may access your site with the same session ID
;   always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0

; Select a hash function
; 0: MD5   (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0

; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
;
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 5

; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs.  If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Connect timeout
;mssql.connect_timeout = 5

; Query timeout
;mssql.timeout = 60

; Valid range 0 - 2147483647.  Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 - 2147483647.  Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch.  0 = all records in one batch.
;mssql.batchsize = 0

; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On

; Use NT authentication when connecting to the server
mssql.secure_connection = Off

; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1

; Specify client character set. 
; If empty or not set the client charset from freetds.comf is used
; This is only used when compiled with FreeTDS
;mssql.charset = "ISO-8859-1"

[Assertion]
; Assert(expr); active by default.
;assert.active = On

; Issue a PHP warning for each failed assertion.
;assert.warning = On

; Don'
t bail out by default.
;
assert.bail Off

User-function to be called if an assertion fails.
;
assert.callback 0

; Eval the expression with current error_reporting().  Set to true if you want
error_reporting(0around the eval().
;
assert.quiet_eval 0

[COM]
path to a file containing GUIDsIIDs or filenames of files with TypeLibs
;com.typelib_file =
allow Distributed-COM calls
;com.allow_dcom true
autoregister constants of a components typlib on com_load()
;
com.autoregister_typelib true
register constants casesensitive
;com.autoregister_casesensitive false
show warnings on duplicate constant registrations
;com.autoregister_verbose true

[mbstring]
language for internal character representation.
;
mbstring.language Japanese

internal/script encoding.
Some encoding cannot work as internal encoding.
; (
e.gSJISBIG5ISO-2022-*)
;
mbstring.internal_encoding EUC-JP

http input encoding.
;
mbstring.http_input auto

http output encodingmb_output_handler must be
registered as output buffer to function
;
mbstring.http_output SJIS

enable automatic encoding translation according to
mbstring.internal_encoding settingInput chars are
converted to internal encoding by setting this to On.
Note: Do _not_ use automatic encoding translation for
;       
portable libs/applications.
;
mbstring.encoding_translation Off

automatic encoding detection order.
auto means
;mbstring.detect_order auto

substitute_character used when character cannot be converted
one from another
;mbstring.substitute_character none;

overload(replacesingle byte functions by mbstring functions.
mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
etcPossible values are 0,1,2,or combination of them.
; For 
examplefor overload everything.
0No overload
1Overload mail() function
2Overload str*() functions
4Overload ereg*() functions
;mbstring.func_overload 0

enable strict encoding detection.
;
mbstring.strict_encoding Off

[FrontBase]
;
fbsql.allow_persistent On
;fbsql.autocommit On
;fbsql.show_timestamp_decimals Off
;fbsql.default_database =
;
fbsql.default_database_password =
;
fbsql.default_host =
;
fbsql.default_password =
;
fbsql.default_user "_SYSTEM"
;fbsql.generate_warnings Off
;fbsql.max_connections 128
;fbsql.max_links 128
;fbsql.max_persistent = -1
;fbsql.max_results 128

[gd]
Tell the jpeg decode to libjpeg warnings and try to create
a gd imageThe warning will then be displayed as notices
disabled by default
;
gd.jpeg_ignore_warning 0

[exif]
Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
With mbstring support this will automatically be converted into the encoding
given by corresponding encode settingWhen empty mbstring.internal_encoding
is used. For the decode settings you can distinguish between motorola and
intel byte orderA decode setting cannot be empty.
;
exif.encode_unicode ISO-8859-15
;exif.decode_unicode_motorola UCS-2BE
;exif.decode_unicode_intel    UCS-2LE
;exif.encode_jis =
;
exif.decode_jis_motorola JIS
;exif.decode_jis_intel    JIS

[Tidy]
The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg

Should tidy clean and repair output automatically?
WARNING: Do not use this option if you are generating non-html content
such as dynamic images
tidy
.clean_output Off

[soap]
Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to liveSets the number of second while cached file will be used 
instead of original one.
soap.wsdl_cache_ttl=86400

Local Variables:
tab-width4
End:

Edit: Added code tags to fix formatting and scrolling. - MC
« Last Edit: June 12, 2008, 11:18:55 PM by Motoko-chan »

Offline agentx42

  • Semi-Newbie
  • *
  • Posts: 44
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #12 on: June 12, 2008, 10:31:20 PM »
ref checking apache for port 80.

The only Apache Icon I have on my screen is the small one all the way at the bottom for the Apache 2.2 monitor. When vice monitor (showing green) but the only options I have are "ok", "stop", "restart", "services", "connect" and exit. Nothing comes up to test port 80.

Offline Night09

  • SMF Hero
  • ******
  • Posts: 1,522
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #13 on: June 12, 2008, 10:48:30 PM »
Quote
The only Apache Icon I have on my screen is the small one all the way at the bottom for the Apache 2.2 monitor. When vice monitor (showing green) but the only options I have are "ok", "stop", "restart", "services", "connect" and exit. Nothing comes up to test port 80.

Right I see.Mine is left and right clickable with different options try this instead

Open a command prompt box and type this into it

netstat -a

This will list what is using the ports. I will look over the config file and see if  I can set it for you unless someone else does it before hand.

Offline vbgamer45

  • SMF Friend
  • SMF Super Hero
  • *
  • Posts: 16,403
    • smfhacks on Facebook
    • VBGAMER45 on GitHub
    • @createaforum on Twitter
    • SMF For Free
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #14 on: June 12, 2008, 11:10:22 PM »
I would change this setting in the php.ini

Find
; Directory in which the loadable extensions (modules) reside.
extension_dir = "./"

Change to

extension_dir = "C:\\Program Files\\Apache Software Foundation\\Apache2.2\\PHP\\ext"



Then restart Apache

Community Suite - Take your forum to the next level built for SMF, Gallery,Store,Classfieds,Downloads,more!

SMFHacks.com -  Paid Modifications for SMF

Latest Mod:
EzPortal - Portal System for SMF
Newsletter Pro SMF Gallery Pro SMF Classifieds SMF Store

Offline agentx42

  • Semi-Newbie
  • *
  • Posts: 44
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #15 on: June 13, 2008, 07:03:13 AM »
I tried that but I get the same error.

I did a google search onth error message, but all I found was the following (which doesn't make much sense to me:

http://dev.simplemachines.org/mantis/view.php?id=1863

Thanks for the help and sticking with me on this. I'm sure it's just something simple I'm missing...

Offline 青山 素子

  • Server Team
  • SMF Super Hero
  • *
  • Posts: 16,511
  • 戦場ヶ原、蕩れ!
    • motokochan on GitHub
    • @motokochan on Twitter
    • Animeneko Network
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #16 on: June 13, 2008, 10:59:56 AM »
The customer migration finished up yesterday, so I might be able to fit some direct assistance in today. How would you like to proceed?
Motoko-chan
Director, Simple Machines

Just like... making of enemies / 負ける気しない やめるきない / You are cool but fool - Charisma.com 『HATE』

Note: I am not a member of the Simple Machines Forum project.


Offline agentx42

  • Semi-Newbie
  • *
  • Posts: 44
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #17 on: June 13, 2008, 02:12:39 PM »
Sorry for the delay in getting to you. I didn't get the usual update.

I'm open to anything.  If it is easier and faster for you I can send you the IP, password and userID to get remote access to the server and you can go in and just have at it.

If you need me to do anything I'm available by phone or skype.

Also, I used some of the advice above and tried to set apache 2.2 up on port 8080 to see

These links should now work (theoretically, in a perfect world) if I got it right:

http://www.cai.servebbs.org/SMF/install.php

http://www.cai.servebbs.org/test.php

you can also try http://www.cai.servebbs.org/

I did the netstat -a as someone above suggested and it saud the following:

Listening to:

HTTP
emmap
microsoft-ds
1025
pptp
3389
8080
8005
netbios-ssn

It has "*.* next to

microsoft-ds
1026
1028
1032
1046
12tp
4500
ntp
1030
1031
mtp
netbios-ns
netbios-dgm

If any of that means anything

Let me know.

Bob
« Last Edit: June 13, 2008, 04:40:27 PM by agentx42 »

Offline Sarge

  • SMF Friend
  • SMF Hero
  • *
  • Posts: 6,209
  • Gender: Male
    • Zëri YT!
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #18 on: July 05, 2008, 04:57:54 AM »
Hello there, have you managed to fix the problem yet?
    Please do not PM me with support requests unless I invite you to.

http://www.zeriyt.com/   ~   http://www.galeriashqiptare.net/


Quote
<H> I had zero posts when I started posting

Offline agentx42

  • Semi-Newbie
  • *
  • Posts: 44
Re: problem linking MY SQL to PHP and SMF on install. Please help
« Reply #19 on: July 05, 2008, 09:27:22 AM »
I did get it running.  We're greatful for all the help from all on the forum

Bob

www.cai.servebbs.org:8080/index.php