Text only | Text with Images

Simple Machines Community Forum

SMF Support => Converting to SMF => Topic started by: Goofy64 on January 03, 2007, 02:48:27 PM

Title: convert from Invision Power Board 1.3.1 to SMF 1.1.1 does not work
Post by: Goofy64 on January 03, 2007, 02:48:27 PM
SMF Version: SMF 1.1.1
Hi,
i have a problem to convert my IPB 1.3.1 to a SMF 1.1.1. The Failure you can see at the Attachment.

Can anyone help me ?

thank
Goofy
Title: Re: convert from Invision Power Board 1.3.1 to SMF 1.1.1 does not work
Post by: KGIII on January 28, 2007, 09:54:46 AM
Hi,

I am cleaning out older posts. Did you manage to get this resolved?
Title: Re: convert from Invision Power Board 1.3.1 to SMF 1.1.1 does not work
Post by: Goofy64 on January 28, 2007, 02:17:04 PM
no - no answer - Problem not solved  :'(
Title: Re: convert from Invision Power Board 1.3.1 to SMF 1.1.1 does not work
Post by: JayBachatero on January 28, 2007, 02:58:21 PM
Try using the converter in this topic: IPB 1.3.x (http://www.simplemachines.org/community/index.php?topic=146211)
Text only | Text with Images