Simple Machines announces the release of SMF 1.1.11, addressing multiple vulnerabilities found in SMF 1.1.10. Also for those still using the SMF 1.0.x branch, an upgrade to 1.0.19 was released. We strongly recommend that all users upgrade as soon as possible.
Upgrade automatically by visiting your administration center, where a notice will be displayed prompting you to upgrade. Click the link, confirm the changes and your forum will be up to date again. Additionally, you can upgrade using the package manager by downloading the attached patch, uploading it to the package manager, and applying it as prompted. For help with this refer to the Package Manager (http://docs.simplemachines.org/index.php?board=49.0;sort=subject) section of the Online Manual (http://docs.simplemachines.org/).
If you cannot upgrade using the package manager, please follow the instructions posted in the Online Manual (http://docs.simplemachines.org) about installing (http://docs.simplemachines.org/index.php?board=2.0;sort=subject) and upgrading (http://docs.simplemachines.org/index.php?board=3.0;sort=subject). If you experience a session verification error when inputting FTP details for updating process, please see this (http://www.simplemachines.org/community/index.php?topic=278824.0) topic.
It may be necessary to apply the upgrade manually if mod conflicts mean that you cannot install the patch through the package manager. Instructions for doing this can be found on manual upgrades (http://custom.simplemachines.org/upgrades/) page for SMF 1.1.11 and 1.0.19.
Finally - please do not use this topic for any support requests. You will get a much more prompt response by visiting the relevant support board!
Regards,
Simple Machines
Anybody upgrade to 1.1.11 yet .. not seeing it in package manager as yet ...
Try it now, not all scripts had been properly updated yet :)
I just used the package manager to update my 1.1.10 test site, worked just fine
Good Job on the new release ^^
Congratulations!
/me just updated two forums via admin. Flawless :)
Quote from: Compuart on December 01, 2009, 07:21:48 PM
Try it now, not all scripts had been properly updated yet :)
Thanks ... updated without probs on 2 different installations i have 8) ...
I hope it fixes some issue where bots are constantly trying to use quickmod.
Congratulations!
/me has got a conflict in Subs.php and is going to have to do manual edits. Shouldn't install so many mods. :D
Quote from: Antechinus on December 01, 2009, 07:29:56 PM
/me has got a conflict in Subs.php and is going to have to do manual edits. Shouldn't install so many mods. :D
I lol'd
For some reason I always prefer using the update pack instead of the patch, maybe it's because I like going into the upgrade.php file? XD
Issue it seems :o
http://www.simplemachines.org/community/index.php?topic=351358.msg2384344#msg2384344
Great, Thanks Developers!
Just in case that someone need it, this announcement in spanish:
http://www.simplemachines.org/community/index.php?topic=351375.0
Good job, updated and feeling safe :p haha
Quote from: Kill Em All on December 01, 2009, 07:53:58 PM
Good job, updated and feeling safe :p haha
U seem to have the same issue as me .. see below
Quote from: aw06 on December 01, 2009, 07:48:34 PM
Issue it seems :o
http://www.simplemachines.org/community/index.php?topic=351358.msg2384344#msg2384344
i just upgraded...noticing that flash embeding / image posting is not working because for some reason any URLs are having an extra "http://" added to the URL so links are coming out looking like "http://http://website....."
suggestions?
I upgraded two forums in one minute using the "Oy, click here!" link on the admin page. I don't see how it could be any easier.
Keep up the good work, good people!
Quote from: nrepuyan on December 01, 2009, 07:59:32 PM
i just upgraded...noticing that flash embeding / image posting is not working because for some reason any URLs are having an extra "http://" added to the URL so links are coming out looking like "http://http://website....."
suggestions?
I made a post about the issue ...
http://www.simplemachines.org/community/index.php?topic=351358.msg2384344#msg2384344
Quote from: aw06 on December 01, 2009, 08:08:03 PM
I made a post about the issue ...
http://www.simplemachines.org/community/index.php?topic=351358.msg2384344#msg2384344
ya i noticed that...lol.
voiced my el problemo there too....
There was indeed a problem with a few modifications in the package. If you've installed it and are experiencing the image location problem, uninstall it (should be easy when using the package manager) and reinstall it either by downloading it again (the proper version is now online) or downloading it from the first message of this topic.
We apologies for the inconvenience this might have caused.
fix worked! that was fast! much appreciated!
Quote from: Compuart on December 01, 2009, 08:11:02 PM
There was indeed a problem with a few modifications in the package. If you've installed it and are experiencing the image location problem, uninstall it (should be easy when using the package manager) and reinstall it either by downloading it again (the proper version is now online) or downloading it from the first message of this topic.
We apologies for the inconvenience this might have caused.
Thanks for the quick fix .... :P
Thanks Compuart :)
Does the 1.1.11 full install have the same issues or not?
I've never done an udate before will this effect my forum?
And could you give me step by step instructions for updating. Thanks
Clone,Killer: You are best creating a new thread, this is not a support thread.
Quote from: Arantor on December 01, 2009, 08:26:27 PM
Thanks Compuart :)
Does the 1.1.11 full install have the same issues or not?
Fastest way to check is to look if your images are missing ...
Apparently the full install I grabbed moments after announcement is broken :-/
Will grab a fresh one momentarily.
So what all was fixed in this update ?
Quote from: Arantor on December 01, 2009, 08:26:27 PM
Thanks Compuart :)
Does the 1.1.11 full install have the same issues or not?
Yes it was, but the packages where regenerated with the fix.
Quote from: Arantor on December 01, 2009, 08:42:31 PM
Apparently the full install I grabbed moments after announcement is broken :-/
Will grab a fresh one momentarily.
Yeah Rev 9457 has it fixed in the 1.1 trunk builds, probably just awaiting regeneration of the packages.
Edit: Sleepy beat me.
Fails at ./Themes/default/Packages.template.php
Now what?? :'(
Thanks.
UPDATE: Found that the Packages.template.php file on my web site had
"// Version: 1.1.7; Packages" instead of "// Version: 1.1.8; Packages".
Corrected file text, uploaded that, and then the update worked!! Thanks!!! ;D
tcosmas, please open a support topic in the 1.1 support boards and we will be able to help you :)
Methen: Lots of things.
A notice appeared on my forum to upgrade to 1.1.11. It said just click here and all will be fine. I get repeated errors that the package is corrupted. (I use the default theme). I see that some people upgraded just fine but others, including me, did not. I appreciate the developers giving the public SMF and maintaining it. However, it doesn't really help to claim how simple things are when they don't work. I will live with some problems before I will get all frustrated like this. Maybe being a bit forthright would be a good idea rather than "click here and all is OK.
odds are that you have a lot of mods installed, causing the upgrade via the package manager to fail. You should open a support topic about this and I'm sure someone will be glad to help you out.
Hi,
Any chance of being supplied just the difference files from 1.1.10?
Webhost does not allow the forum to execute anything from package manager (been over this with them a few times, the answer is no!) and it's a PITA to upload everything for one or two files.
Which files are changed so I can just upload those?
Thanks! ;D
Quote from: Methen on December 01, 2009, 08:44:28 PM
So what all was fixed in this update ?
SMF 1.1.11 December 1 2009
================================================================================
November 2009
--------------------------------------------------------------------------------
! Ensure that our websiteUrl field only has valid http links - reported by WHK. (Profile.php)
! Package server deletion was missing a session check - reported by WHK. (PackageGet.php, Packages Template)
! Clean our package server name of any html - reported by WHK. (PackageGet.php)
! Do better validation on which packages we are deleting - reported by WHK. (Packages.php, Packages Template)
! Only remove our vote for valid sessions - reported by sirdarckcat. (Poll.php)
! Package option settings didn't check the session - reported by cicatriz.r00t. (Packages.php)
! Poll removal was missing a session check. (Poll.php)
! Merging topics needed a session check - reported by ysk.sft. (SplitTopics.php, SplitTopics Template)
! Try to clean our attachment names better. (Post.php)
! Do a better job at cleaning our admin login page - reported by gabry9191. (Subs-Auth.php)
! The board index category collapse was missing a session check - reported by WHK. (BoardIndex.php, Subs-Boards.php)
! The parsing of basic HTML images wasn't properly escaped - reported by sirdarckcat. (Subs.php)
! Smiley sets weren't properly escaped - reported by cicatriz.r00t. (ManageSmileys.php, Profile.php, Subs.php)
! The inline URL detection could in some cases cause bad parsing results - reported by yacg. (Subs.php)
! Double check the sanity of URL's in parse_bbc. (Subs.php)
October 2009
--------------------------------------------------------------------------------
! Store less information in the query string when searching the moderation log, and verify it every time. (Modlog.php)
! Simplify searching for members of a group with a link. (ManageMembers.php, ManagePermissions.php)
! When navigating between pages in member administration, send the data being searched for in request prior to parsing, and parse it every time. (ManageMembers.php)
! Ensure the attachment permissions are verified for the correct board. (Display.php)
September 2009
--------------------------------------------------------------------------------
! Holidays need to be checked (ManageCalendar.php)
! IE8 isn't detected, to avoid bouncy textareas, just render as IE7 with the metatag (Load.php)
August 2009
--------------------------------------------------------------------------------
! ManageAttachments could have an undefined index error when browsing. (ManageAttachments.php) [Bug 3623]
! Thumbnails not removed on removing attachment (ManageAttachments.php) [Bug 3653]
Quote from: Geek on December 01, 2009, 09:05:27 PM
Hi,
Any chance of being supplied just the difference files from 1.1.10?
Webhost does not allow the forum to execute anything from package manager (been over this with them a few times, the answer is no!) and it's a PITA to upload everything for one or two files.
Which files are changed so I can just upload those?
Thanks! ;D
http://custom.simplemachines.org/upgrades/index.php?action=upgrade;file=smf_patch_1.0.19_1.1.11.zip;smf_version=1.1.10
Should have them all :)
Quote from: heritage on December 01, 2009, 08:59:22 PM
A notice appeared on my forum to upgrade to 1.1.11. It said just click here and all will be fine. I get repeated errors that the package is corrupted. (I use the default theme). I see that some people upgraded just fine but others, including me, did not. I appreciate the developers giving the public SMF and maintaining it. However, it doesn't really help to claim how simple things are when they don't work. I will live with some problems before I will get all frustrated like this. Maybe being a bit forthright would be a good idea rather than "click here and all is OK.
Please open a support topic, some servers don't support the package manager, however the update package should work fine?
Trekkie101, heritage: Seems there was a slight glitch with how this package was built. Has been rectified now if you attempt to grab it again via your admin panel.
Thanks Trekkie! ;D
Cheers!
Just as an FYI, if you have nCode Image Resizer v1.2 (http://custom.simplemachines.org/mods/index.php?mod=1197) installed, you'll need to uninstall it before applying this update. It modifies at least 1 line in the /Sources/Subs.php file which will cause this update to fail.
Yes, that mod modifies how image tags are handled - any mod that does the same will require removal then you'll need to wait for its author to update.
Thanks for the heads-up!
updated in seconds fix worked pretty good
thanks for new release
Quote from: Arantor on December 01, 2009, 09:11:07 PM
Trekkie101, heritage: Seems there was a slight glitch with how this package was built. Has been rectified now if you attempt to grab it again via your admin panel.
Once this got fixed, I upgraded four forums in a matter of minutes. All went into place without a hiccup. Thanks!
One of the forums I managed moved to a new server, so it was my first experience with the FTP permissions change screen. Nicely, the process worked great. Yet another example of the care put into SMF.
(The new server runs a default Plesk install, the old one was custom-managed.)
Thank you so much :D great work
NaWaR, as the first post says, make a topic in our support boards.
Does anyone know if this fix an issue where a user can change another user's password? I'm having that issue in my forum so we disabled profiles. Does this fix that bug? Or at least, did you know about that bug? :S.
Thanks.
PS: Anyway, I'm installing the upgrade... I just want to know if it fix it so I can put the profiles active again.
I don't think it does, venex, however this does seem to be on our bug tracker.
Updated without any problems. Thanks. ;D
Quote from: venex on December 01, 2009, 10:09:52 PM
Does anyone know if this fix an issue where a user can change another user's password? I'm having that issue in my forum so we disabled profiles. Does this fix that bug? Or at least, did you know about that bug? :S.
Thanks.
PS: Anyway, I'm installing the upgrade... I just want to know if it fix it so I can put the profiles active again.
I'm not sure I know the issue. If you think it is a SMF bug, can you please consider posting it on this forum, either in the Bug Reports board, or Support boards, as you wish? (this topic is not very appropriate)
Have the update zip files on the Downloads page been updated to fix the extra http error? Because I updated via those files less than an hour ago and my forum is still having the problem; image tags, links, etc. don't work at all.
Quote from: Neuropod on December 01, 2009, 11:35:52 PM
Have the update zip files on the Downloads page been updated to fix the extra http error? Because I updated via those files less than an hour ago and my forum is still having the problem; image tags, links, etc. don't work at all.
http://www.simplemachines.org/community/index.php?topic=351358.msg2384710#msg2384710
congratulations, I must try this.
Thanks a lot
thank you
nice work
updated fine for me and i have 24 mods installed
great work guys
Updated the forum within a few seconds. That's nice. :)
Thanks!
Updated 2 sites one with full custom theme another with a simi custom theme.
Worked liked a charm.
Thanks!!!
Frank
I have this error: ./Sources/Subs.php
stargatecorner: please open a topic in 1.x Support.
I am finding errors, should i upgrade or not?
QuoteInstallations actions for "SMF 1.0.19 / 1.1.11 Update":
Installing this package will perform the following actions:
Type Action Description
1. Execute Modification ./index.php Test successful
2. Execute Modification ./Sources/BoardIndex.php Test successful
3. Execute Modification ./Sources/Display.php Test successful
4. Execute Modification ./Sources/Load.php Test successful
5. Execute Modification ./Sources/ManageAttachments.php Test successful
6. Execute Modification ./Sources/ManageCalendar.php Test successful
7. Execute Modification ./Sources/ManageMembers.php Test successful
8. Execute Modification ./Sources/ManagePermissions.php Test successful
9. Execute Modification ./Sources/ManageSmileys.php Test successful
10. Execute Modification ./Sources/Modlog.php Test successful
11. Execute Modification ./Sources/PackageGet.php Test successful
12. Execute Modification ./Sources/Packages.php Test successful
13. Execute Modification ./Sources/Poll.php Test successful
14. Execute Modification ./Sources/Post.php Test successful
15. Execute Modification ./Sources/Profile.php Test successful
16. Execute Modification ./Sources/SplitTopics.php Test successful
17. Execute Modification ./Sources/Subs.php Test failed
18. Execute Modification ./Sources/Subs-Auth.php Test successful
19. Execute Modification ./Sources/Subs-Boards.php Test successful
20. Execute Modification ./Sources/Subs-Graphics.php Test successful
21. Execute Modification ./Sources/Themes.php Test successful
22. Execute Modification ./Themes/default/Packages.template.php Test successful
23. Execute Modification ./Themes/default/SplitTopics.template.php Test successful
24. Execute Modification ./Sources/ManageRegistration.php Test successful
25. Execute Modification ./Sources/Packages.php Test successful
26. Execute Modification ./Sources/PersonalMessage.php Test successful
27. Execute Modification ./Sources/Register.php Test successful
28. Execute Modification ./Sources/ManagePermissions.php Test successful
29. Execute Modification ./Sources/ManagePermissions.php Test successful
30. Execute Modification ./Sources/SplitTopics.php Test successful
31. Execute Modification ./Sources/Themes.php Test successful
raghhav: Please open a new topic in 1.x Support.
I successfully applied the update. Good job! Thanks to all contributors... SMF is the best!!!
yep, after posting it, i read it. sorry. :)
thank you alot
but can we know the exact upgrade in 1.1.10 ??or there is no change ?? :o
best regards
Thanks! Had a little problem with subs.php (Test Failed) so I had to manually do that one (had something to do with Image Resizer mod). Otherwise, excellent patch!
Quote from: Lord High Warlock on December 01, 2009, 09:22:32 PM
Just as an FYI, if you have nCode Image Resizer v1.2 (http://custom.simplemachines.org/mods/index.php?mod=1197) installed, you'll need to uninstall it before applying this update. It modifies at least 1 line in the /Sources/Subs.php file which will cause this update to fail.
thank you! was wondering why mine was doing that.
If you have any questions please do open a topic in 1.x Support.
I tried to update from package manager
But the subs is creating problem. :( May be i have to edit the subs manually.
Execute Modification ./Sources/Subs.php Test failed
gouri: Please open a new topic in 1.x Support with a list of your mods, thanks.
applied the upgrade from the admin panel.... worked fine for me...
is there any major difference from 1.1.10?
There are a number of important security fixes, but no user-visible changes, I believe.
(https://www.simplemachines.org/community/proxy.php?request=http%3A%2F%2Fi60.servimg.com%2Fu%2Ff60%2F12%2F70%2F89%2F85%2F194210.gif&hash=2fcc11b952a3a2523eacb983f719fa9cfd0a363b)
i updated using the patch but the warning msg still appear asking me to update !!!
the-punisher: please open a new topic in 1.x Support.
good job.. thanks
nice work
Upgrade already, Thank it worked.
Thanks for all the hard work you all have put into this. Last night I upgraded two forums, through the package manager. One forum with little mods, the other with Tiny Portal, SMG, Ultimate Profile, and a few other mods and tweaks. Both installed quickly and flawlessly.
Thanks again!
Great, Thanks Developers!
* Haяy successfully updated his forums to newest version.
Thanks SMF.
Quote from: aw06 on December 01, 2009, 07:48:34 PM
Issue it seems :o
http://www.simplemachines.org/community/index.php?topic=351358.msg2384344#msg2384344 (http://www.simplemachines.org/community/index.php?topic=351358.msg2384344#msg2384344)
I realize that the package has been updated to address this issue, but can someone tell me if the manual upgrade instructions found on this link have also been adapted?
http://custom.simplemachines.org/upgrades/index.php?action=upgrade;file=smf_patch_1.0.19_1.1.11.zip;smf_version=1.1.10 (http://custom.simplemachines.org/upgrades/index.php?action=upgrade;file=smf_patch_1.0.19_1.1.11.zip;smf_version=1.1.10)
thnx for the Update SMF ;)
What are the major changes from 1.1.10 to 1.1.11? Mainly behind the scenes Sources or are Template Files structure edited as well?
Thanks,
Labradoodle-360
Updated it's O. K. :) Forum worked very good. :)
Many thank's for new release! :) Very great work! :)
Hi guy great work i just updated my SMF 1.1.10 to 1.1.11, but i got a litle problem the subs.php test failed , so i'm looking on editing it manually ... is there a way to find what the patch do ?
gbsothere: That is correct AFAIK.
xakiru: See the link a few posts up, shows you every edit made by the update.
Labradoodle-360: Same answer - gbsothere posted a link to the package manager parsing the list of changes.
tnx , i'm going to check right now :D
Quote from: Labradoodle-360 on December 02, 2009, 10:06:37 AM
What are the major changes from 1.1.10 to 1.1.11? Mainly behind the scenes Sources or are Template Files structure edited as well?
Thanks,
Labradoodle-360
SMF 1.1.x is not developed anymore and hasn't been developed for years. All updates are related to sequrity updates, and are important.
I am very aware of that, but I had also read there were some template edits.
So I was just curious...Thanks for the replies,
Labradoodle360
Quote from: Akyhne on December 02, 2009, 11:50:20 AM
Quote from: Labradoodle-360 on December 02, 2009, 10:06:37 AM
What are the major changes from 1.1.10 to 1.1.11? Mainly behind the scenes Sources or are Template Files structure edited as well?
Thanks,
Labradoodle-360
SMF 1.1.x is not developed anymore and hasn't been developed for years. All updates are related to sequrity updates, and are important.
Sequrity related issues can be anywhere in the software.
Thanks...I'm well aware of this.
Quote from: Akyhne on December 02, 2009, 12:14:58 PM
Sequrity related issues can be anywhere in the software.
For everyone who use Ncode image resizer:
In ./Sources/Subs.php
Find:
'content' => '<img src="$1" alt="" border="0" onload="NcodeImageResizer.createOn(this);" />',
'validate' => create_function('&$tag, &$data, $disabled', '$data = strtr($data, array(\'<br />\' => \'\'));'),
And replace with this:
'content' => '<img src="$1" alt="" border="0" onload="NcodeImageResizer.createOn(this);" />',
'validate' => create_function('&$tag, &$data, $disabled', '
$data = strtr($data, array(\'<br />\' => \'\'));
if (strpos($data, \'http://\') !== 0 || strpos($data, \'https://\') !== 0)
$data = \'http://\' . $data;
'),
Little bug fix. Someone will not showen image, if have some other install mode: Then they can use next code:
'content' => '<img src="$1" alt="" border="0" onload="NcodeImageResizer.createOn(this);" />',
'validate' => create_function('&$tag, &$data, $disabled', '
$data = strtr($data, array(\'<br />\' => \'\'));
if (strpos($data, \'http://\') !== 0 && strpos($data, \'https://\') !== 0)
$data = \'http://\' . $data;
'),
@ LOVELORD
Which file is that?
Thank You SMF Team.
gbsothere: Subs.php
Quote from: LOVELORD on December 02, 2009, 01:46:22 PM
For everyone who use Ncode image resizer
Please keep such post in the relevant support topics for mods.
Thanks, Arantor. :)
I finally get it done. Thanks.
Updated in seconds using the admin panel. Thanks all in the SMF team.
Did mine from the ACP first thing this morning. No hassles at all.
thanks. :)
Thanks :D
Any updates for SMF 2.2 RC2? 1.0 and 1.1 was updated. Thats why I ask.
.\Sources/Subs.php Test failed
I have SMF 1.1.10
Realinfo: Please open a new topic in 1.x Support, with a list of the mods you have.
Been using SMF since 1.1.3. Never before have I had such a hard time upgrading. But it's my fault for having so many modifications and custom code changes I guess. Anyways I got it all sweet after a few hours. Nothing that the search button and a bit of patience couldn't sort out. :o
Big thanks to all of the SMF staff for the great work and the continuous commitment/development/evolution. 8)
Hi,
Can we find anywhere a changelog?
As always, a changelog is available as the last item on the http://download.simplemachines.org/ page ;)
EDIT: Sorry, webinstall is last - changelogs before that :P
i have tried to update my forum but all i keep getting is an error message
ERROR
The requested URL could not be retrieved
--------------------------------------------------------------------------------
The following error was encountered while trying to retrieve the URL: http://ebinum.byethost4.com/index.php?
Zero Sized Reply
Squid did not receive any data for this request.
Your cache administrator is webmaster.
can somone help me please i think if i dont update it soon somone will hack my site
Can somone
ebinum: Please post a new topic in 1.x Support with details of who your host is.
And again a screwed update (3rd, 4th or 5th?)... Just 18 hours after the update and the first bugs you have to realize that there is a new update file with the same name. No comment on download or home page. Isn't it possible to learn the lessons of the past?
Worst update handling ever.
Excellent, thanks for the update! 8)
done with out any issues. now plz bring SMF 2.0 Final version ASAP.
Quote from: DavidCT on December 03, 2009, 11:05:43 AM
I have the problems with http's. I JUST REdownloaded BOTH the upgrade and full install and none of those files were updated after 12/1 so they obviously weren't fixed.
Yesterday evening (with http bug in Subs.php):
>md5sum smf_1-1-11_update.tar.bz2
a55eff2670b14217ede3dd950eff9e77 smf_1-1-11_update.tar.bz2
Today morning (9 hours ago, without bug):
>md5sum smf_1-1-11_update.tar.bz2
ca33e3dab84ddb4ae056633d8fa6a3fc smf_1-1-11_update.tar.bz2
Thanks for this update, I thought dev's forgot about 1.1.x :D
i installed it and now can not view any of the images posted either in the signiture [profile] or in the normal posts :(
Please check out: http://www.simplemachines.org/community/index.php?topic=351341.msg2384404#msg2384404
i already got the patch and it didnt do anything.. still the same -sighs-
Please open a support topic in the support (http://www.simplemachines.org/community/index.php?board=9.0) boards, in case you did not so yet.
As I said in PM, I suspect you've got the older patch, not the newer one (since there were issues with mirrors carrying the older patch files)
There is also a support topic for this already.
Quote from: SleePy on December 01, 2009, 05:59:19 PM
Simple Machines announces the release of SMF 1.1.11, addressing multiple vulnerabilities found in SMF 1.1.10. Also for those still using the SMF 1.0.x branch, an upgrade to 1.0.19 was released. We strongly recommend that all users upgrade as soon as possible.
Upgrade automatically by visiting your administration center, where a notice will be displayed prompting you to upgrade. Click the link, confirm the changes and your forum will be up to date again. Additionally, you can upgrade using the package manager by downloading the attached patch, uploading it to the package manager, and applying it as prompted. For help with this refer to the Package Manager (http://docs.simplemachines.org/index.php?board=49.0;sort=subject) section of the Online Manual (http://docs.simplemachines.org/).
If you cannot upgrade using the package manager, please follow the instructions posted in the Online Manual (http://docs.simplemachines.org) about installing (http://docs.simplemachines.org/index.php?board=2.0;sort=subject) and upgrading (http://docs.simplemachines.org/index.php?board=3.0;sort=subject). If you experience a session verification error when inputting FTP details for updating process, please see this (http://www.simplemachines.org/community/index.php?topic=278824.0) topic.
It may be necessary to apply the upgrade manually if mod conflicts mean that you cannot install the patch through the package manager. Instructions for doing this can be found on manual upgrades (http://custom.simplemachines.org/upgrades/) page for SMF 1.1.11 and 1.0.19.
Finally - please do not use this topic for any support requests. You will get a much more prompt response by visiting the relevant support board!
Regards,
Simple Machines
hi
I upgrade my smf1.1.10 to smf 1.1.11 manually, but after that my page not loaded . I don't know why . plz help me
Quote from: Essi on December 04, 2009, 03:18:34 AM
I upgrade my smf1.1.10 to smf 1.1.11 manually, but after that my page not loaded . I don't know why . plz help me
Please read:
Quote from: SleePy on December 01, 2009, 05:59:19 PM
Finally - please do not use this topic for any support requests. You will get a much more prompt response by visiting the relevant support board!
Sorry for this question, but what means this version vs. 2.0?
Thank you
This update affects 1.0 and 1.1.
A further update to 2.0 will be at some stage, to deal with issues that arose out of 2.0 RC2.
Quote from: nrepuyan on December 01, 2009, 07:59:32 PM
i just upgraded...noticing that flash embeding / image posting is not working because for some reason any URLs are having an extra "http://" added to the URL so links are coming out looking like "http://http://website....."
suggestions?
For god sake. We the bloody subject!!
QuoteFinally - please do not use this topic for any support requests. You will get a much more prompt response by visiting the relevant support board!
Finally - please do not use this topic for any support requests. You will get a much more prompt response by visiting the relevant support board!
READ THE SUBJECT
Is there any reason 80% of the packages I try to install aren't compatible with this version?
It's a real pain.
Yesterday I tried to add "increase message box size", "Hide mod and admin edit notes" and a couple of others.
Will this be fixed any time in the near future?
Quote from: Fionae on December 04, 2009, 10:46:35 AM
Will this be fixed any time in the near future?
Mods are not created by the team for most part, so it's up to the author to make them compatible. Ask in the support topics of the mods.
nice.........will be upgrade my forum too ;D
update :
just using package manager, only 2 click, and viola........upgraded. really easy
nice ;D
i got a error in subs.php .... how do i manually modify it ? where from i get the modifications ?
If you errors installing the patch, then you should remove the mods that makes changes to that part. From there, you probably need to ask the author(s) of your mod(s) to make them SMF 1.1.11 compatible.
ahhhh thats a big mess .. anyways leave that i downloaded the patch opened the .mod file and modified my subs.php manually now its fine .. Thanks SMF for update
Help...
I haven't upgraded since 1.1. RC2... I have asked my support several times, but does never get an answer or help... So I need to to it my self.. I'm a little bit afraid for doing something wrong... Could someone give me an easy description....'
You'll need the big upgrade package, and will want to do a manual upgrade. Instructions are in the online manual. Note that this will remove all installed modifications and you will need to reinstall them once the upgrade is complete. There is also a chance that any custom themes might not work and you'll need to update those too.
Despite the pain this might cause, please do upgrade. There have been several large security holes fixed since that version.
Upgraded without a problem....
thanks smf ^^
huge problem with this update:
http://www.simplemachines.org/community/index.php?topic=352240.0
problem found here:
http://www.simplemachines.org/community/index.php?topic=352240.msg2391320#msg2391320
no prob for me
great work!!! O:)
thank you :)
Does anyone have an official changelog for this version?
When I click Update to 1.1.11, it asks for my FTP Information.
What're the FTP Server, Username & Password and Local Path to SMF?
i uprgaded through the link provided by my host and could no longer see ad management mod what sould i do?
Quote from: trparky on December 06, 2009, 10:41:23 PM
Does anyone have an official changelog for this version?
http://download.simplemachines.org/index.php?thanks;filename=smf_1-1-11_changelog.txt
Quote from: blckrvntr on December 06, 2009, 10:55:46 PM
When I click Update to 1.1.11, it asks for my FTP Information.
What're the FTP Server, Username & Password and Local Path to SMF?
Your FTP server connection address, your own FTP login name and password, and the relative path to your SMF installation, from the FTP index folder. For most, the FTP server is localhost, the rest is up to you.
Quote from: Akyhne on December 02, 2009, 02:22:21 PM
Quote from: LOVELORD on December 02, 2009, 01:46:22 PM
For everyone who use Ncode image resizer
Please keep such post in the relevant support topics for mods.
yes, but i found here a problem... :o :o :o
Quote from: trparky on December 06, 2009, 10:41:23 PM
Does anyone have an official changelog for this version?
download here :
http://download.simplemachines.org/index.php?thanks;filename=smf_1-1-11_changelog.txt
regards, GISfreak
Thank You for News version smf advice
i have 1 problem upon installation in
17. Execute Modification ./Sources/Subs.php Test failed
what seems to be the prob? i started at 1.1.4 no problem upgrading till 1.1.10
sheila_lee: Please start a topic in the Support boards.
Congratulations! ::)
Quote from: sheila_lee on December 08, 2009, 09:14:47 AM
i have 1 problem upon installation in
17. Execute Modification ./Sources/Subs.php Test failed
what seems to be the prob? i started at 1.1.4 no problem upgrading till 1.1.10
How about learn about listening to instructions.... SleePy has made it very clear THAT THIS ISN'T A SUPPORT TOPIC!!!!!! How many times.....
Checking in for Hypercrites.org--clicked on the update link provided in the Admin panel and voila. No muss, no fuss, no cuss.
Themes forum 1.1.10 will work???
Some may require changes due to the changes in 1.1.11.
hello, I have taken the version on google, and I do not know php
is is that I could get more information, I speak French, and called me a walking track for upgraded
We do have a French board: http://www.simplemachines.org/community/index.php?board=14.0
:) Congrats on the new one
17. Execute Modification .\Sources/Subs.php Test failed
in smf 1.1.10 in default theme
Help to make it manually...........
Realinfo: Please open a topic in the support forums.
Parsing of basic HTML images and escaping of smiley sets - is that so important? Where are the big security fixes that shine red in my administration panel?
The package manager delivers a negative installation check for subs.php - I'll rather skip this version, looking at all the bugs and incompatibilities it seems to cause. :-\
The reason is because it's possible to add malicious code through those tags if abused.
When, for example, should it be the case that an image tag's contents doesn't begin with http, https or (possibly) ftp ?
Good Job!!!
Quick and easy. Thanks a lot!
my current version is SMF 1.1.2 and i wish to upgrade to 1.1.11. I try many attempt from package upgrade but failed. anyone can help.
john from singapore :) :)
[email protected]
glaswerkz, please open a new thread in Install and Upgrade Help with more information, like exactly how you tried to upgrade via the package manager.
Forum with tons of MODS updated without any problems at all. How I will ever get my monster to SMF 2.0 I have no idea but that is for another day. Thanks for the updated security :)
One question, if i use some modifications like awards or stuff like that and i have modified deafult theme... can i update or it may mess up my forum?
How safe is update?
If you try the install it always does a test first to show if the install will have an error. If not, you just proceed and it will upgrade fairly quickly. Of course, before making any changes you should always backup stuff. For the most part, it's pretty safe to update with mods.
Quote from: IchBin™ on December 15, 2009, 02:54:00 PM
If you try the install it always does a test first to show if the install will have an error. If not, you just proceed and it will upgrade fairly quickly. Of course, before making any changes you should always backup stuff. For the most part, it's pretty safe to update with mods.
Thank you :)
Quote from: dannyjp on December 02, 2009, 04:10:12 AM
Thanks! Had a little problem with subs.php (Test Failed) so I had to manually do that one (had something to do with Image Resizer mod). Otherwise, excellent patch!
hi, i would like to know, how and what exactly you changed in subs,php, please help
raghhav: http://custom.simplemachines.org/upgrades/ - you can use that to see every single change in every one of the files.
You know, it would be REALLY nice if on the next update, you nueter down upgrade_1-1.sql or at least improve it so it doesn't run ALTER TABLE that are redundant/existing formats. I've got 700K posts in messages, and when it gets to:
ALTER TABLE {$db_prefix}messages
CHANGE COLUMN ID_MSG_MODIFIED ID_MSG_MODIFIED int(10) unsigned NOT NULL default '0';
and
ALTER TABLE {$db_prefix}messages
ADD INDEX ipIndex (posterIP(15), ID_TOPIC);
IT sends my server off into never-never land, the operations taking so long they time out, even though the damned tables are already IN that structure and HAVE that index! The past six updates I've had to go in and manually comment those out of that .sql file to get the blasted upgrades to go in. (and I do check that the values in said list are applied)
Likewise, when you put together the 'small update' or even the 'large upgrade', it might just help NOT to include the files that haven't changed since 2005? Like say... THE ENTIRE MALFING IMAGE DIRECTORIES in the themes?!? Just saying for those of us with large boards for whom the automatic packages don't work - or have made modifications to things like subs.php to make values like $break not be, as the comment in the code says: "SADLY and INCREDIBLY browser dependent" (I did mention that can be fixed in another thread like a year ago, right?) meaning we have to manually update... or even just those of us who refuse to allow settings.php to be 755 or 777 (oh yeah, that's a brilliant ***** idea, how did that avatar exploit work again? Using $_POST to build an array without checking entries and modifying settings.php?) - we might appreciate those types of changes to the packages.
Seriously, what does the 1.1.10 to 1.1.11 'small update' need to be including ALL of the themes directory when the most recently updated file is from july, only three files have been updated within the past year, and the majority of the files haven't seen changes since 2007!
Though I think I said this for 1.1.10 as well.
Wanna move this to bug reports? :D
Btw, I agree about the "small update" packages. I usually strip them down before applying them. Much faster if you have to do an ftp job.
1-click-update worked perfectly for me, thanks!
Updated with no problem. Thank you.
Hi, I installed the new updates but when I try to delete some users or post i get the following error message;
Database Error
Unknown column 'a.file_hash' in 'field list'
File: /home/af/public_html/\alk/Sources/Display.php
Line: 711
Note: It appears that your database may require an upgrade. Your forum's files are currently at version SMF 1.1.11, while your database is at version 1.1.5. The above error might possibly go away if you execute the latest version of upgrade.php.
Can someone help me please?
You need to run the "upgrade script" to complete your upgrade.
I did run the upgrade script, but there are few language files which are not upgraded. How do I finish this issue?
Please create a new topic in the 1.1.x support board, to get answers to your questions.
http://www.simplemachines.org/community/index.php?board=9.0
Quote from: Filipina on December 15, 2009, 10:58:05 AM
Forum with tons of MODS updated without any problems at all. How I will ever get my monster to SMF 2.0 I have no idea but that is for another day. Thanks for the updated security :)
hahaha, same with me. just wait till gold, then will think bout it
It ia a good one ;D
Good Job .... Gongrats :)
Does anyone know an RSS poster mod that will work with 1.1.11 ?
RSS Feeder - only for 2.0RC2
RSS Feed Poster - now unsupported and buggy on my board,
Are there any others? Are most people going straight to 2.0RC2 or should we hold out for live board?
Thanks for replies.
AFAIK those are the only two such mods.
Great work, thank you, guys. 8)
Its working well.. Keep up the good work..
Quote from: arunkumarrrr on January 04, 2010, 02:24:37 AM
Its working well.. Keep up the good work..
No sorry it doesn't work well , pls check http://www.simplemachines.org/community/index.php?topic=356688.new#new
Brand new install, didn't used any custom theme, I'm using default theme and can't delete any poll.
@Deviliciouz, please open your own support topic. This thread is not for support.
I'm having the same problem, using 1.1.11 default theme.
Quote from: JBlaze on January 21, 2010, 03:44:55 AM
@Deviliciouz, please open your own support topic. This thread is not for support.