Simple Machines is happy to bring you the latest update to SMF. As always, it contains some bugfixes. While most of the changes are minor, one of the fixes is important. We strongly suggest that you upgrade to this version, because it's more stable and secure.
What's changed:
- fixed a few minor issues
- updated the URL to the lacnic whois server
- fixed "notify of replies" getting turned off accidentally
- database error emails weren't always or often sending
- a few theoretically possible security related issues were tightened down
As always, we would appreciate if you give us constructive feedback about this release, as well as bug reports.
If you are upgrading from 1.0.2, the easiest way to update is through the package manager. If not, you only need to use the "update" package as it includes only the changed files since 1.0's release. However, if you have any mods installed it would be better to use the "upgrade" package because it contains all the files for an SMF installation. Remember that you can use the "upgrade" package to come from any previous version of SMF, as well as from YaBB SE 1.5.1 or higher.
http://www.simplemachines.org/download.php
Thanks,
Simple Machines
The package manager failed to update $boarddir/index.php correctly
The following needs to be corrected (in smf_1-0-3.mod)
<search for>
$forum_version = 'SMF 1.0.3';
</search for>
<replace>
$forum_version = 'SMF 1.0.3';
</replace>
should be
<search for>
$forum_version = 'SMF 1.0.2';
</search for>
<replace>
$forum_version = 'SMF 1.0.3';
</replace>
Done, that's what I get for not uploading the one I made just before I left to work and redoing it at home.
-[Unknown]
:P Wonderful update !
I've problems using package manager to upgrade due to ftp permission problem but I'm reading up on that, so not an issue.
But I would like to know what files or folders must not be chmod to 777 or if chmod to 777 for upgrading purposes, must be chmod back to the original permission after upgrading?
Thanks!
Upgrade went great, apart from updating the update log, although that's never updated correctly for me since the 1.0.1 update? Ah well, thanks all :)
Why chmod 777 is NOT a security risk (http://www.simplemachines.org/community/index.php?topic=2987.0)...
-[Unknown]
its not a security risk, if the admin knows what he does. Updating went fine like allways. my member reports that it is running faster now although i see no changes or idea why. but, if member happy, i`m happy. :) bad english, just german, sry.
Updating..... (Package Manager)
Failed, needs to open stream blady, blah
Il need to run fix ownership again.
thanks [Unknown] for the link :)
i've (finally) got to use the package manager with some help from fix_ownership.php hee hee hee :D
I am again having issues with getting the package manager to install this patch:
2: fopen("/<root>/community/Sources/News.php", "w") - Permission denied
File: /<root>/community/Sources/Subs-Package.php
Line: 1454
Would fix_ownership help with this or is it something else?
the SMF news needs to be updated :P
QuoteNews: If you're not yet using the latest version, SMF 1.0.2, please upgrade as soon as possible.
Quote from: hebxi1 on March 29, 2005, 09:12:25 AM
I am again having issues with getting the package manager to install this patch:
2: fopen("/<root>/community/Sources/News.php", "w") - Permission denied
File: /<root>/community/Sources/Subs-Package.php
Line: 1454
Would fix_ownership help with this or is it something else?
CHMOD 666 or 777 for News.php
Thanks SMF Team,
and congratulations ;D
I'm new to SMF so this was my first opportunity to use the package manager to update my forum, and I have to admit that I'm impressed. I've never been able to apply a forum update so quickly or easily. Kudos to the SMF team!
updated to SMF 1.0.3 (from SMF 1.0.2) without problems via Package Manager.
Update of both my forums from 1.0.2 to 1.0.3 went smoothly. :)
I updated manual (Not by Package manager)
manual install a treat, nice one guys and gals ;)
Using the following link
http://www.twilightavengers.com/forum/index.php?action=pgdownload;auto;package=http://mods.simplemachines.org/downloads/smf_1-0-3_package.tar.gz;sesc=...
I get the following error:
QuoteAn Error Has Occurred!
The package you are trying to download or install is either corrupt or not compatible with this version of SMF.
Thank you so much. I think that SMF will out do any and all the other forums(Paid or Free). Hope to see verson 1.1 soon.
BuilderDan
Quote from: MikeMill on March 29, 2005, 10:53:32 AM
Using the following link
http://www.twilightavengers.com/forum/index.php?action=pgdownload;auto;package=http://mods.simplemachines.org/downloads/smf_1-0-3_package.tar.gz;sesc=1cace1b5527a11a79fa668ef4bd06615
I get the following error:
QuoteAn Error Has Occurred!
The package you are trying to download or install is either corrupt or not compatible with this version of SMF.
I also have an error.
Can someone give the goog url forum 1.02 to 1.03
Le paquet que vous tentez de télédécharger est soit invalide, soit corrompu.
I am still using 1.0.1 with mambo bridge 2.2 can I update the same way as everyone else or do I have to do something different
Quote from: DirkDiggler on March 29, 2005, 02:51:40 PM
I am still using 1.0.1 with mambo bridge 2.2 can I update the same way as everyone else or do I have to do something different
It should be OK to upgrade. That is the beauty with the bridge. It doesnt alter any SMF corefiles, so upgrading should be easy ;)
I just upgraded myself with no problems (using bridge 3.02).
But backup is always wise.
you should upgrade the bridge to 3.02...
Quote from: el-brujo on March 29, 2005, 10:21:27 AM
updated to SMF 1.0.3 (from SMF 1.0.2) without problems via Package Manager.
when I try and login now after upgrading it is telling me
Warning: smf_main(public_html/community/Sources/MOS_SMF.php): failed to open stream: No such file or directory in /components/com_smf/smf.php on line 268
Fatal error: smf_main(): Failed opening required 'public_html/community/Sources/MOS_SMF.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in/components/com_smf/smf.php on line 268
update worked fine.... great work...
QuoteThank you so much. I think that SMF will out do any and all the other forums(Paid or Free). Hope to see verson 1.1 soon.
How do you mean that BuilderDan...? I am also wondering when SMF gets an paid board...? Hopefully it stays open for everyone because its a great forum...
Greetz ;)
Quote from: DirkDiggler on March 29, 2005, 04:02:52 PM
when I try and login now after upgrading it is telling me
Warning: smf_main(public_html/community/Sources/MOS_SMF.php): failed to open stream: No such file or directory in /components/com_smf/smf.php on line 268
Fatal error: smf_main(): Failed opening required 'public_html/community/Sources/MOS_SMF.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in/components/com_smf/smf.php on line 268
Did you updated mambo to 3.02 first or are you still running 2.2?
Quote from: MikeMill on March 29, 2005, 10:53:32 AM
Using the following link
http://www.twilightavengers.com/forum/index.php?action=pgdownload;auto;package=http://mods.simplemachines.org/downloads/smf_1-0-3_package.tar.gz;sesc=...
If that link doesn't work for you, it's likely your server does not allow PHP to download URLs. Please download this file and upload it to your Packages directory:
http://mods.simplemachines.org/downloads/smf_1-0-3_package.tar.gz
-[Unknown]
Thanks for the clarification of the problem [Unknown]
Me too i have the bridge 3.02 installed and the redirection mod, what package should i use?
Update or upgrade? (and which way for the two?)
Wow. The update went so smooth that I didn't even realize I had updated yet. ; )
Package Manager rocks my package. erm... :P
Gravu... use the package manager!
Yes, but which package, with my mod installed?
Use the package manager in SMF... there is an option in the text above the installed packages that says somewthing like "upgrade here" or something like that.
You do not have to use any of the full installations or upgrades or updates....
Ok, i saw it, thanks to you.
work well. ;)
Very good work boys... ;)
Just noticed the topic ID of this thread and had to comment.
SMF = ELITE!!
;D
Tried on one board... worked great.
One the second board... on the pre-test I got success on everything except:
15. Execute Modification ./Themes/default/Display.template.php Failure
and then
"Some of the files this package needs to modify are not writable. This needs to be changed by logging into FTP and chmoding the files."
This file is set to 777
any ideas?
I'm afraid the failure means that it's not automatically updatable. This likely means you have modified it - which is a bad idea for the default theme.
-[Unknown]
I'm getting this error when trying to use the Package Manager:
Quote
2: fopen(): SAFE MODE Restriction in effect. The script whose uid/gid is 10301/10001 is not allowed to access /home/httpd/vhosts/kuahale.com/httpdocs/forum/Packages/temp owned by uid/gid 48/48
File: /home/httpd/vhosts/kuahale.com/httpdocs/forum/Sources/Subs-Package.php
Line: 1454
B
Please try this tool:
http://www.simplemachines.org/community/index.php?topic=28393.0
-[Unknown]
i really dont know what to say.. it updated in half a second. im in shock :o i really am.. i've never done an update so easily/smoothly than this...
great work smf team!! :D
Quote from: [Unknown] on March 29, 2005, 07:16:10 PM
Please try this tool:
http://www.simplemachines.org/community/index.php?topic=28393.0
-[Unknown]
hmmm....ran it, and it said it was successful. However, the package still won't install, and I get the same error.
B
Quote from: MikeMill on March 29, 2005, 10:53:32 AM
Using the following link
http://www.twilightavengers.com/forum/index.php?action=pgdownload;auto;package=http://mods.simplemachines.org/downloads/smf_1-0-3_package.tar.gz;sesc=...
I get the following error:
QuoteAn Error Has Occurred!
The package you are trying to download or install is either corrupt or not compatible with this version of SMF.
I am experiencing the same error trying to upgrade from 1.02 to 1.03 using package manager, uploading the tar.gz file.. Please advise... and BTW, SMF ROCKS!!!!!!!!!!!!!!!!!!
Quote from: [Unknown] on March 29, 2005, 06:56:59 PM
I'm afraid the failure means that it's not automatically updatable. This likely means you have modified it - which is a bad idea for the default theme.
-[Unknown]
Replaced "altered" Default Theme with untouched Default files from 1.0.2
Reran... worked.
Thanks.
NOTE TO SELF... Do not touch default theme ever again.
im loving SMF more and more. the update worked fine on my test board and my public board. and it didnt even affect my mods. the pakage manager has really improved and its very quick.
Quote from: danolie on March 29, 2005, 07:28:08 PM
Quote from: MikeMill on March 29, 2005, 10:53:32 AM
Using the following link
http://www.twilightavengers.com/forum/index.php?action=pgdownload;auto;package=http://mods.simplemachines.org/downloads/smf_1-0-3_package.tar.gz;sesc=...
I get the following error:
QuoteAn Error Has Occurred!
The package you are trying to download or install is either corrupt or not compatible with this version of SMF.
I am experiencing the same error trying to upgrade from 1.02 to 1.03 using package manager, uploading the tar.gz file.. Please advise... and BTW, SMF ROCKS!!!!!!!!!!!!!!!!!!
Please see my reply, here:
http://www.simplemachines.org/community/index.php?topic=31337.msg238202#msg238202
Quote from: B on March 29, 2005, 07:24:21 PM
hmmm....ran it, and it said it was successful. However, the package still won't install, and I get the same error.
B
You may have to delete the Packages/temp directory.
-[Unknown]
Hello Everyone,
Have a question actually two. In my package manager I am getting this message:
A problem has been found in the system that sends critical database messages. You can install this patch(click here to install) to easily up date yourself to the latest version.
Is this the place to download the new version 1.0.3? Also if it is there is a file missing "Execute Modification ./changelog.txt"
How do I get this file?
If that message I typed is not where to get 1.0.3, how do I get it through my package manager?
Plus if that message is not the updated version how do I fix the critical database message problem?
Sorry was more than two questions. Thanks for your help.
QuoteA problem has been found in the system that sends critical database messages. You can install this patch(click here to install) to easily up date yourself to the latest version.
yes this is the place to update to the lastest version. only if you have 1.0 and up.
Quote from: odpifounder on March 29, 2005, 07:49:49 PM
Is this the place to download the new version 1.0.3? Also if it is there is a file missing "Execute Modification ./changelog.txt"
How do I get this file?
That's the changelog.txt file from 1.0.2. If you want the file, and want the update to go perfectly, you could copy said file from the smf_1-0-2_update archive in the archived downloads...
-[Unknown]
Quote from: [Unknown] on March 29, 2005, 07:44:25 PM
Quote from: B on March 29, 2005, 07:24:21 PM
hmmm....ran it, and it said it was successful. However, the package still won't install, and I get the same error.
B
You may have to delete the Packages/temp directory.
-[Unknown]
okay, will try that. Thanks.
B
[edit]It worked! Although, I had to turn off the renaming modified files with a ~ suffix. I was getting an error when it tried to do that for some reason. :-\ Thanks, [Unknown]![/edit]
I successfully upgraded from 1.0.2 to 1.0.3 using the Package Manager. It was seamless and didn't receive one error message at all. Very cool software! SMF rocks!!
Woohoo new SMF. Very excited about that. I'm going to be updating my forum soon, I have a flu-like thing so very sick and spent last night all in the bathroom...yeah not so fun, as I get better. But, before I do I wonder if it is possible for a complete list of changes to be made available for me. I realize there is usually a changelog but can someone, such as Unknown or someone less busy, post the link to the list of changes or send the list to me via e-mail (
[email protected])?
I like to show my staff what has changed and why we should upgrade.
Additionally, do we know how SMF 1.0.3 is reacting to any of the popular mods? For example, I'm running the following mods and I realize some of them are fairly popular:
1. Ultimate Shoutbox 1.22
2. Pie Chart Mod 1.2
3. SMF 1.0.1 Update Package 1.0.1
4. OnLine Users Today 1.2
5. SMF 1.0.2 Update Package 1.0.2b
6. Unreplied Topics 1.02
7. Thread's Bookmarks 1.1 [ Uninstall ] [ List Files ] [ Delete ]
8. Faster Parsecode 1.07
9. ModSettings Textarea 1.02
10. Spoiler Tag 1.02
11. Topic Ratings 1.02
12. G&S_Sticky 1.0
13. Visual Warning / Post Moderation 1.21
14. The Bar Of Experience 1.1
15. Location Mod 1.1.1
16. Display Membername on Hover 1.0
17. Locked Boards 1.1
18. Membergroup Colors In Posts 1.1
I want to ensure that my forum, forum.wargamingforums.com, won't die or lock up when updating to SMF 1.0.3. I usually uninstall all mods before doing an update and then install them again, one at a time, to see if there's any problems. But, I just like to check beforehand. Be prepares as they taught us in the Boy Scouts. :)
Quote from: dustrho on March 29, 2005, 08:47:56 PM
I successfully upgraded from 1.0.2 to 1.0.3 using the Package Manager. It was seamless and didn't receive one error message at all. Very cool software! SMF rocks!!
ICAM. Just updated and it was a snap.
Love SMF! :-* :D
I have successfully update SMF to 1.0.3 and everything is working great. One small thing that I can't figure out though, is that in the 'Admin Center' shows that I'm still using 1.0.2, but when I click on '(more detailed)' and view the comparison between all files they are all the current version. I had to manually edit a few of my template files, but they worked all just fine. Any ideas?
Hey there,
I just gotta tell yah'all, over the years i've ran alot of different boards.. heh pretty much tried em all php, php/MySql and cgi/perl and the update of this board was without a doubt the simplest i've ever experienced. I'm still running a few PhpBB's on some of my sites but after this i'll be looking for a db converter. Totally Awesome SMF, thanks :D
Two Thumb's Up!!
Cheers.. 8)
I screwed up, and know that ignorance of best practices is no excuse. I confess to having set up my board by modifying files that are in the default theme, as well as in my non-standard theme. It works fine, but now, reading the upgrade posts, I realize the error of my ways.
Now I have two questions on mitigating the damage.
1. I have a backup of my current board under public_html/smfbackup/smf while my live version is under public_html/smf. I am thinking that logging into the backup, applying the backup to it as a test and fix would be the way to go. But when I try to do this, I wind up being logged into the live directory version instead. Suggestions?
2. What is the best approach to cleaning my errors in altering default theme files mixed up with alterations to the non-standard files?
Last, just to make sure I have rehabilitated my thinking, I should, when needing to modify a file that is not currently in my working theme, copy a version from the default theme, modify it, and put it in my working theme. Correct?
Oh, and I have not applied the upgrade yet. Wanted to not compound things before getting input.
Thank you SMF, it was a nice upgrade. But i still have two worries:
1. my footer "powered by SMF 1.02" not changed;
2."A problem has been found in the system that sends critical database messages. You can install this patch (click here to install) to easily update yourself to the latest version." still appears when get into the Package Manager, what should i do about it?
many thanks for your wonderful work of SMF, just like it !!!
Quote from: [Unknown] on March 29, 2005, 06:56:59 PM
I'm afraid the failure means that it's not automatically updatable. This likely means you have modified it - which is a bad idea for the default theme.
-[Unknown]
I get the same display.php update failure but I didn't modify the default template. At least not deliberately.
-Jazhawk
I've upgraded from 1.0.2 to 1.0.3 using the manual package. Everything works fine, except that the main forum page has for some reason become accessible to registered members only. Unregisered visitors see the "Only registered members are allowed to access this section" message. How can I change this setting?
Quote from: megacelt on March 29, 2005, 10:37:29 PM
1. I have a backup of my current board under public_html/smfbackup/smf while my live version is under public_html/smf. I am thinking that logging into the backup, applying the backup to it as a test and fix would be the way to go. But when I try to do this, I wind up being logged into the live directory version instead. Suggestions?
I would personally use a file comparsion tool, such as ConTEXT (www.context.cx) to compare the files with the originals. This would allow you to see what changes you made, and make them in your own theme only.
In any case, it's likely you should be able to apply the package manager update to the live site without losing any of your custom changes. It only makes changes, it doesn't replace files.
Quote2. What is the best approach to cleaning my errors in altering default theme files mixed up with alterations to the non-standard files?
File comparison is, in my opinion, the only good way.
QuoteLast, just to make sure I have rehabilitated my thinking, I should, when needing to modify a file that is not currently in my working theme, copy a version from the default theme, modify it, and put it in my working theme. Correct?
Exactly.
Quote from: simstim on March 30, 2005, 01:14:32 AM
I've upgraded from 1.0.2 to 1.0.3 using the manual package. Everything works fine, except that the main forum page has for some reason become accessible to registered members only. Unregisered visitors see the "Only registered members are allowed to access this section" message. How can I change this setting?
There's a setting in Edit Features and Options to allow guests to do more than just login or register. I don't remember it's name off hand, but just search for "guests" on that page.
-[Unknown]
At the bottom of my SMF home page it says it's 1.0.2, although some files such as SplitTopics.php say SMF 1.0. This and the following make me question which version I have before updating to 1.0.3:
When attempting to split a very recent topic, I get the following error message. This has happened only on one topic.
QuoteDuplicate entry '0-4' for key 2
File: /home/wiztom/public_html/SMF_forum/Sources/SplitTopics.php
Line: 358
Note: It appears that your database may require an upgrade. Your forum files are currently at version SMF 1.0.2, whereas your database is at version SMF 1.0. It is recommended that you execute the latest version of upgrade.php.
Which path do I need to take to 1.0.3?
TIA
Quote from: [UnknownThere's a setting in Edit Features and Options to allow guests to do more than just login or register. I don't remember it's name off hand, but just search for "guests" on that page.
-[Unknown]
Found it. Thanks! Easy when you know how :)
Re: Confessions of a newbie
Please, let's not change the Title of the Topic
i tried but i can`t install.i am using now 1.0.2.i suppose to upload upgrade.php!i tried through package manager.
waiting your reply.
Quote from: Jazhawk on March 30, 2005, 12:38:14 AM
Quote from: [Unknown] on March 29, 2005, 06:56:59 PM
I'm afraid the failure means that it's not automatically updatable. This likely means you have modified it - which is a bad idea for the default theme.
-[Unknown]
I get the same display.php update failure but I didn't modify the default template. At least not deliberately.
-Jazhawk
a mod you installed could have modified the default theme, check there.
Even though I've changed the default theme, and even some source files I upgraded to 1.0.3 successfully and without the slightest problem! Everything works just fine including my mods!
Thanx a lot! :D
Well, I did a fresh backup, and a go at the upgrade. The initial file list showed a failure for Display.template.php. Assuming this was because I had modified the file, I I uploaded an unmodified version, and it indicated that all was ok. So I went ahead with process, and all was successful acording to the message. However, I decided to look further and found this Edited except for where there are discrepancies:
SMF File Your Version Current Version
SMF Package SMF 1.0.3 SMF 1.0.3
ManageMembers.php 1.0.3 1.0.2
Current Templates 1.0 1.0.3
Display.template.php 1.0 1.0.3
Arcade.php Arcade 1.1 ??
Arcade2.php Arcade 1.1 ??
ArcadeAdmin.php Arcade 1.1 ??
Chat.php ?? ??
Arcade.template.php 1.1 ??
ArcadeAdmin.template.php ?? ??
Chat.template.php ?? ??
Arcade.english.php 1.1 ??
MsgIcon.php 1.0 Beta 6 ??
I assume I don't need to worry about the mod addition files, but do I need to remedy the first three?
Hello all,
I successfully upgraded from 1.0.2 to 1.0.3 using the Package Manager
All work very good, big thanks to the SMF team makin this so cool and no stressing 8)
had 1.0.2 running and my database was stuck in version 1.0 used the upgrade package and evereything is honky dory thanks a lot
umnn when is 1.1 expected ?
Quote from: shishira on March 30, 2005, 09:04:15 AM
umnn when is 1.1 expected ?
Its out there you know. Get an Charter membership ;)
i am unable to upgrade anyone plz help me. i am now on 1.0.2............
What error do you get?
file is corroupt....!!!! :'( :'( :'( :'( :'(
should i try to upload only upgrade.php through package manager?
are you uploading the updater from this site?
If yes, you should be clicking the link in your admin center, not uploading anything.
can u tell me simply that how i can upgrade from 1.0.2 to 1.0.3. and my al settings themes/mods r remain there.plz make it simple as u can.which file should i upload?
No you dont need to uplaod anything,
Admin -> Package Manager -> (Some link) Update to 1.0.3
Its kinda like that and that will upgrade you.
thanks really thanks for your kindness and for your support. ;) ;) ;) ;)
take care.
i got it. thanks.
I had a problem doing the upgrade, everything went fine in the first step, I got 17 "success" and no failures reported then I entered my password for my FTP and hit proceed and got a bunch of warnings all in the /Sources/Subs-Package.php.
Is there any way I can go and fix these?
Thanks for the help.
do you have any mods?
Also try Fix_ownership http://www.simplemachines.org/community/index.php?topic=28393.0
And if you can post a exact error
Quote15. Execute Modification ./Themes/default/Display.template.php Failure
Have you changed the default theme at all?
Quote from: Trekkie101 on March 30, 2005, 11:55:14 AM
Have you changed the default theme at all?
No change to the default theme
Quote from: Trekkie101 on March 30, 2005, 11:39:38 AM
do you have any mods?
Also try Fix_ownership http://www.simplemachines.org/community/index.php?topic=28393.0
And if you can post a exact error
No mods just the newest Mambo bridge installed, I ran that after my first try but now I get that the upgrade is already installed and it gives an error in the "./index.php"
Here's the list of errors I received .
Warning: fopen(/home/frostbi/public_html/forum/changelog.txt): failed to open stream: Permission denied in /home/frostbi/public_html/forum/Sources/Subs-Package.php on line 1454
I just heading out for the afternoon, I really appreaciate the fast help and will be back trying to fix things as soon as I get home.
Thanks again, Kevin
Can a mod clean that to like only 1 error, also fix_owenership.php http://www.simplemachines.org/community/index.php?topic=28393.0 should fix that or else go chmod all those files to 777, thats why they arent working.
Is this supposed to automatically appear in the package manager? I am running 1.0.2 but I don't see it in there. I'm guessing that mambo might be preventing it from being seen though.
Doesn't appear through non-mambo version either. Anywhere I can download the package manager version?
It appears in the form of a paragraph, also a page or two back will have the link.
I used the link , thanks. I read over that too, it just didn't register.
Greetings all,
I used the package manager to update and get this error:
Type Action Description
1. Execute Modification ./changelog.txt Failure
2. Execute Modification ./index.php Success (rest are success)
UPDATE: I have no idea what I did BUT I did get it to work. One thing is I didn't understand the importance of the FTP server information at the bottom. I corrected an error in it, then got the "proceed" function, still got two errors, went and changed the files to 777 and now it's done.
Ok, learning more about this than I wanted - but it's fun to see it work.
Leslie
Says I need to change permission but I don't know how to change permission on a file "in" a tar.gz package through ftp
I know someone mentioned this in an earlier post but could you address it again in very simple terms (grin). Stress level too high.
I have changelog.txt 3/11/05 and I put a copy in packages folder (original is in /smf/ folder) and put permission to 777 -
When I downloaded both .zip and tar.giz and tried to upload them from my computer I got the "package corrupt" message on both.
Three strikes and I'm yelling for help. :'(
Thanks!
Leslie in San Antonio
the changelog is unimportant, it just tells you what changes their are from laste version, its not something you NEED! :)
Quote from: RyanB on March 30, 2005, 02:01:34 PM
the changelog is unimportant, it just tells you what changes their are from laste version, its not something you NEED! :)
I realize it is not something I need in order to update but I daresay it is rather important. One shouldn't willy-nilly make changes without having a reason to make that change. Consequently, although you don't think the changelog is important I still want a copy. Do you happen to have one? If not, will someone who has a copy make it available for me?
on it way raven!
Nice Update!
Thanks Trekkie. I'm glad that someone else realizes the changelog is important. With this done I'll step aside, in this thread, to ensure those experiencing problems due to the upgrade receive assistance. Rest assured that I'll be back after I perform my own upgrade with cheers and accolades.
On closer inspection, I realize that the Display.template.php "1.0 vs. 1.0.3" version discrepancy is under "current themes", and the default theme Display.template.php is showing as version 1.0.3, so I believe this is as it should be?
Or should I take the default theme Display.template.php 1.0.3, alter a copy with the changes in my current themes version, and put it in my "current theme"?
Quote from: megacelt on March 30, 2005, 04:17:35 AM
Well, I did a fresh backup, and a go at the upgrade. The initial file list showed a failure for Display.template.php. Assuming this was because I had modified the file, I I uploaded an unmodified version, and it indicated that all was ok. So I went ahead with process, and all was successful acording to the message. However, I decided to look further and found this Edited except for where there are discrepancies:
SMF File Your Version Current Version
SMF Package SMF 1.0.3 SMF 1.0.3
ManageMembers.php 1.0.3 1.0.2
Current Templates 1.0 1.0.3
Display.template.php 1.0 1.0.3
Arcade.php Arcade 1.1 ??
Arcade2.php Arcade 1.1 ??
ArcadeAdmin.php Arcade 1.1 ??
Chat.php ?? ??
Arcade.template.php 1.1 ??
ArcadeAdmin.template.php ?? ??
Chat.template.php ?? ??
Arcade.english.php 1.1 ??
MsgIcon.php 1.0 Beta 6 ??
I assume I don't need to worry about the mod addition files, but do I need to remedy the first three?
Quote from: Trekkie101 on March 30, 2005, 12:00:54 PM
Can a mod clean that to like only 1 error, also fix_owenership.php http://www.simplemachines.org/community/index.php?topic=28393.0 should fix that or else go chmod all those files to 777, thats why they arent working.
Everything worked fine, but I still have a couple of questions if it's not too much trouble.
How important is it to chmod those files back to 644?
and in the admin panel it says I'm running " Current SMF version: SMF 1.0.3" at the bottom of the page it says "SMF 1.0.2 for Mambo" Is that very important?
Thanks for all the help, this is a great messageboard.:)
1. You can reset it to 644 if you want but I recomend 777, there isnt anything wrong with that.
2.Thats because the mambo bridge needs updated (I dont think the new one is out yet) (Not very important)
No probs.
I've done a lot of customizing of register.template, and profile template. I've updated them to allow custom registration. If I upgrade, and I going to overwrite everything that I've done?
Trekkie (& wingnut) that is no longer "fixed" in the bridge... it's variable... you have to click the "update" link in the mambo com_smf edit config section...
Quote from: kindred on March 30, 2005, 05:09:41 PM
Trekkie (& wingnut) that is no longer "fixed" in the bridge... it's variable... you have to click the "update" link in the mambo com_smf edit config section...
Thanks, I dont use mambo myself, just what I read around here.
Jazz check the package, and the changelog, I dont know ehter changes were made or not but and upgrade using the update package would certainyl kill it, while im not sure if the Package Manager would do the same.
Quote from: kindred on March 30, 2005, 05:09:41 PM
Trekkie (& wingnut) that is no longer "fixed" in the bridge... it's variable... you have to click the "update" link in the mambo com_smf edit config section...
That did the trick, Thanks kindred.:)
Quote from: ^Raven^ on March 29, 2005, 09:43:35 PM
Woohoo new SMF. Very excited about that. I'm going to be updating my forum soon, I have a flu-like thing so very sick and spent last night all in the bathroom...yeah not so fun, as I get better. But, before I do I wonder if it is possible for a complete list of changes to be made available for me. I realize there is usually a changelog but can someone, such as Unknown or someone less busy, post the link to the list of changes or send the list to me via e-mail ([email protected])?
I like to show my staff what has changed and why we should upgrade.
Additionally, do we know how SMF 1.0.3 is reacting to any of the popular mods? For example, I'm running the following mods and I realize some of them are fairly popular:
Looks fine. The changes are in the first post.
Quote from: weekendclimber on March 29, 2005, 10:10:05 PM
I have successfully update SMF to 1.0.3 and everything is working great. One small thing that I can't figure out though, is that in the 'Admin Center' shows that I'm still using 1.0.2, but when I click on '(more detailed)' and view the comparison between all files they are all the current version. I had to manually edit a few of my template files, but they worked all just fine. Any ideas?
Are you using the Mambo Bridge? You may have to update it too.
Waddebye, same.
Quote from: rvforumite on March 30, 2005, 01:33:16 AM
At the bottom of my SMF home page it says it's 1.0.2, although some files such as SplitTopics.php say SMF 1.0. This and the following make me question which version I have before updating to 1.0.3:
When attempting to split a very recent topic, I get the following error message. This has happened only on one topic.
Same, and also go to Admin -> Forum Maintenance -> Find and repair all forum errors.
Quote from: megacelt on March 30, 2005, 04:17:35 AM
SMF File Your Version Current Version
SMF Package SMF 1.0.3 SMF 1.0.3
ManageMembers.php 1.0.3 1.0.2
Current Templates 1.0 1.0.3
Display.template.php 1.0 1.0.3
If you haven't modified ManageMembers.php, and no mods have, you can replace it with a clean version from the upgrade zip file. The Display template shouldn't be a problem, and is caused by your current theme.
Quote from: hassan on March 30, 2005, 09:57:52 AM
file is corroupt....!!!! :'( :'( :'( :'( :'(
should i try to upload only upgrade.php through package manager?
If you get that error, you can't download packages with your host. Please download this file:
http://mods.simplemachines.org/downloads/smf_1-0-3_package.tar.gz
And upload it to your Packages directory instead.
/me takes a quick breather before continuing on...
-[Unknown]
Quote from: goosemoose on March 30, 2005, 12:29:22 PM
Is this supposed to automatically appear in the package manager? I am running 1.0.2 but I don't see it in there. I'm guessing that mambo might be preventing it from being seen though.
Yes, Mambo might prevent it from being seen because it lists "1.0.2 for Mambo" instead of "1.0.2".
You can download the package from the link I posted above.
Quote from: Springanew on March 30, 2005, 01:58:24 PM
Greetings all,
I used the package manager to update and get this error:
Type Action Description
1. Execute Modification ./changelog.txt Failure
2. Execute Modification ./index.php Success (rest are success)
UPDATE: I have no idea what I did BUT I did get it to work. One thing is I didn't understand the importance of the FTP server information at the bottom. I corrected an error in it, then got the "proceed" function, still got two errors, went and changed the files to 777 and now it's done.
Ok, learning more about this than I wanted - but it's fun to see it work.
Leslie
Says I need to change permission but I don't know how to change permission on a file "in" a tar.gz package through ftp
I know someone mentioned this in an earlier post but could you address it again in very simple terms (grin). Stress level too high.
I have changelog.txt 3/11/05 and I put a copy in packages folder (original is in /smf/ folder) and put permission to 777 -
When I downloaded both .zip and tar.giz and tried to upload them from my computer I got the "package corrupt" message on both.
The files on the downloads page are not for use with the package manager; those you extract and wholesale upload.
For the package manager, you have that package already; you need to change the permission on the files OUTSIDE the Packages directory, not inside it. It is actually changing those files, which is why it needs permission to do so.
The changelog is available in the upgrade, install, and update archives on the downloads page.
Quote from: megacelt on March 30, 2005, 03:37:11 PM
On closer inspection, I realize that the Display.template.php "1.0 vs. 1.0.3" version discrepancy is under "current themes", and the default theme Display.template.php is showing as version 1.0.3, so I believe this is as it should be?
Or should I take the default theme Display.template.php 1.0.3, alter a copy with the changes in my current themes version, and put it in my "current theme"?
Easiest way would be to modify your Display template with the change as per the modification file in the link I posted above (the package on mods.simplemachines.org.)
-[Unknown]
QuoteAre you using the Mambo Bridge? You may have to update it too.
You are right. In the file $mosConfig_absolute_path/components/com_smf/smf.php around line 23:
$forum_version = 'SMF 1.0.2';
change to:
$forum_version = 'SMF 1.0.3';
Or um that may be a big duh for most everyone, but just for documentation. Thanks ::)
Running the 'Admin->Forum Maintenance->Find and Repair any errors' also fixed the versioning issue. You ROCK!!
It seems David has upgraded me to the new version and everything is SMOOOOTH! Good work fellas.
Note: It appears that your database may require an upgrade. Your forum files are currently at version SMF 1.0.3, whereas your database is at version SMF 1.0.2. It is recommended that you execute the latest version of upgrade.php.
Got this error when installing a MOD.
What should I do?
Don't worry about it. To make it go away, run upgrade.php from the update archive on the downloads page.
-[Unknown]
Quote from: [Unknown] on March 31, 2005, 02:27:53 AM
Don't worry about it. To make it go away, run upgrade.php from the update archive on the downloads page.
-[Unknown]
Thank You.. That did the trick!
hi,
I tried to update from 1.0.2 to 1.0.3 and I have some failure by doing it..
1. Execute Modification ./changelog.txt Failure
2. Execute Modification ./index.php Success
3. Execute Modification ./Sources/Admin.php Failure
4. Execute Modification ./Sources/ManageMembers.php Failure
5. Execute Modification ./Sources/Calendar.php Failure
6. Execute Modification ./Sources/News.php Failure
7. Execute Modification ./Sources/Poll.php Success
8. Execute Modification ./Sources/Profile.php Failure
9. Execute Modification ./Sources/Register.php Success
10. Execute Modification ./Sources/Subs-Auth.php Failure
11. Execute Modification ./Sources/Subs-Package.php Failure
12. Execute Modification ./Sources/Subs-Post.php Success
13. Execute Modification ./SSI.php Success
14. Execute Modification ./Themes/classic/Display.template.php Success
15. Execute Modification ./Themes/default/Display.template.php Success
16. Execute Modification ./Themes/default/Poll.template.php Success
17. Execute Modification ./Themes/default/Search.template.php Success
My forum is working with no errors at the logs after the update.. but im worried about the execute modification failure .. What will I do to fix this ... T.,
help ::)
I must say just - THANK YOU!
I updated from 1.0.2. without any problems, convert from IBF fo SMF without any problems... :D
This forum is very good. Thanks to all the programmers and
everyone behind this nobel forum.
God bless!!
Shads, do you have any mods installed?
If yes, it would be best to uninstall them and then run the update package from the downloads section
Is this upgrade necessary?
-Jazhawk
Quote from: Jazhawk on March 31, 2005, 11:34:42 AM
Is this upgrade necessary?
-Jazhawk
Quote from: Owdy on March 25, 2005, 03:21:27 AM
While most of the changes are minor, one of the fixes is important. We strongly suggest that you upgrade to this version, because it's more stable and secure.
I updated to 1.0.3 and noticed the forum was much slower. I thought it was just my server.
After it being slow all day now I looked more into it. Just the forum is slow. Other sites on the server are just fine.
What could be causing this?
I think something changed regarding the search feature to make it more in depth. Perhaps, that could be causing a slow down. However, I'm on 1.0.3 and haven't noticed any slowness. I also thought other made changes would, in fact, increase the loading. But, I may be thinking of a thread here [Unknown] created to help us save bandwidth. Anywho, sorry. That's all I can come up with but hopefully one of the mods/devs/etc can come up with something to assist you.
Now I'm getting this error..
Connection Problems
Sorry, SMF was unable to connect to the database. This may be caused by the server being busy. Please try again later.
While every other page on that server is fine.
Sounds to me more like the MySQL daemon is having some trouble. Are other MySQL powered sites working?
Quote from: Trekkie101 on March 31, 2005, 03:42:28 PM
Sounds to me more like the MySQL daemon is having some trouble. Are other MySQL powered sites working?
Your right... I just tried to log on the php my Admin and got an error there too.
Just my luck that they would go down just after upgrading.
Heavy load I guess, just give it some time, my site does that now and again.
updated in seconds... no probs :)
Piece of cake!
Mark
What is this display error about? I never modified the default template so why is it happening? I am not in the mood to reload my forum from scratch.
-Jazhawk
Updated my test Enigma/SMF site with Package Manager and it went without a hitch! 8)
I'm happy to hear that the glitch with the reply notification has been fixed with this new version. Keep up the good work :).
-Dan The Man
eeeek
QuoteParse error: parse error, unexpected '$', expecting '&' or T_VARIABLE or T_CONST in /XXXX/XXXX/XXXX/XXXX/httpdocs/XXXX/Sources/Load.php on line 869
Nice error...
Quote from: edchapman on March 31, 2005, 01:44:24 PM
I updated to 1.0.3 and noticed the forum was much slower. I thought it was just my server.
After it being slow all day now I looked more into it. Just the forum is slow. Other sites on the server are just fine.
What could be causing this?
Quote from: edchapman on March 31, 2005, 02:39:59 PM
Now I'm getting this error..
Connection Problems
Sorry, SMF was unable to connect to the database. This may be caused by the server being busy. Please try again later.
While every other page on that server is fine.
These two sound related. SMF 1.0.3 shouldn't have any performance-related changes in it from 1.0.2, so you may wish to contact your host. If you don't believe me, try downgrading.
Quote from: Jazhawk on March 31, 2005, 09:11:16 PM
What is this display error about? I never modified the default template so why is it happening? I am not in the mood to reload my forum from scratch.
-Jazhawk
You may be able to ignore it. I really can't tell you what is causing it.
Quote from: Kerux on April 01, 2005, 01:39:08 AM
eeeek
QuoteParse error: parse error, unexpected '$', expecting '&' or T_VARIABLE or T_CONST in /XXXX/XXXX/XXXX/XXXX/httpdocs/XXXX/Sources/Load.php on line 869
Please try uploading Load.php again; if you don't know where to get it, get smf_1-0-3_upgrade.zip from the downloads page.
-[Unknown]
Quote from: [Unknown] on April 01, 2005, 01:45:34 AM
Quote from: Kerux on April 01, 2005, 01:39:08 AM
eeeek
QuoteParse error: parse error, unexpected '$', expecting '&' or T_VARIABLE or T_CONST in /XXXX/XXXX/XXXX/XXXX/httpdocs/XXXX/Sources/Load.php on line 869
Please try uploading Load.php again; if you don't know where to get it, get smf_1-0-3_upgrade.zip from the downloads page.
-[Unknown]
I have done this... several times actually...
What appears on line 869 of the file? Are you certain you downloaded it and uploaded it completely properly? Are you certain you're using OVERWRITE not RESUME?
-[Unknown]
Quote from: [Unknown] on April 01, 2005, 02:07:33 AM
What appears on line 869 of the file? Are you certain you downloaded it and uploaded it completely properly? Are you certain you're using OVERWRITE not RESUME?
-[Unknown]
Quotefunction loadLanguage($template_name, $lang = '', $ = true)
yes and yes :)
Quote from: Kerux on April 01, 2005, 02:27:01 AM
Quote from: [Unknown] on April 01, 2005, 02:07:33 AM
What appears on line 869 of the file? Are you certain you downloaded it and uploaded it completely properly? Are you certain you're using OVERWRITE not RESUME?
-[Unknown]
Quotefunction loadLanguage($template_name, $lang = '', $ = true)
yes and yes :)
Umm, that's wrong. It should be:
function loadLanguage($template_name, $lang = '', $fatal = true)
This is what is in the downloads?
-[Unknown]
function loadLanguage($template_name, $lang = '', $ = true)
is what I have.... somehow when I pasted it didnt paste properly
eh everytime i hit post, "fatal" is removed...... hmmmm odd
Are you playing an april fools' joke on me or something :P?
-[Unknown]
no sir... i think it might be the software my wife installed to try to keep me honest about where i go on the internet...... it is filtering files when I upload them.....
I just looked at the uploaded file.... "fatal" isnt in there, just as when I pasted here and hit post.....
*oy* who knew a wife could cause so much chaos lol
[edit]Yup thats what it was.... I woke her up amd made her turn that thing off for a minute (password bypass) and then i re uploaded everything.... and now it works........ about time i figured out what it was...... now i can get some sleep before my partner calls and says I am late for work... *yawn*
Sorry for the confusion..... but at least now we know there is a known problem when trying to admin an SMF forum when Cybersitter version9 is actively running on a computer...... dont know how usefull that little tidbit will be, but its a known bug (not in SMF mind you but in that hideous Cybersitter program) now. *yawn* [/edit]
I go to package manager then click on download new packages then Upload a Package and then i choose smf_1-0-3_update.zip that i downloaded to my pc from downloads and then i click on Upload.
The file then starts to upload but after a bit i get this error
An Error Has Occurred!
The package you tried to upload either is not a valid package or has become corrupted.
This happens on on my test forum as well
can anyone help me please
Thank you in advance
p.s. i have tested zip file and it is not corrupt
Wrong package, theres some text on the opening page of the package manager, read it, theres a link to use in it.
[Unknown]
I applied the patch on my test board and even with the error it looks ok. I have one other board to do so I'll keep you posted on that one.
-Jazhawk
Quote from: Trekkie101 on April 01, 2005, 07:51:47 AM
Wrong package, theres some text on the opening page of the package manager, read it, theres a link to use in it.
clicked on link and get this message
An Error Has Occurred!
The package you are trying to download or install is either corrupt or not compatible with this version of SMF.
http://mods.simplemachines.org/downloads/smf_1-0-3_package.tar.gz
This one, I said, not the one on the downloads page. The one on the downloads page is not a package and is for, and only for, the purpose and procedure of uploading via FTP manually.
Please read what I typed carefully, and use the URL above. Do not try to download the package from the downloads page. You will not find it there. It is not available for download from the downloads page. Please use the link I posted above at the top of this post. Please do not look for links in posts above mine, or use any other links.
-[Unknown]
Quote from: [Unknown] on April 01, 2005, 05:05:48 PM
http://mods.simplemachines.org/downloads/smf_1-0-3_package.tar.gz
This one, I said, not the one on the downloads page. The one on the downloads page is not a package and is for, and only for, the purpose and procedure of uploading via FTP manually.
Please read what I typed carefully, and use the URL above. Do not try to download the package from the downloads page. You will not find it there. It is not available for download from the downloads page. Please use the link I posted above at the top of this post. Please do not look for links in posts above mine, or use any other links.
-[Unknown]
I used your link, and downloaded file, then uploaded using package manager and get this error
An Error Has Occurred!
The package manager currently allows only these file types: zip, tar.gz.
when i upload file using ftp, the file cannot be seen in the package manger
Just dont understand it
Hey guys,
I *think* i have upgraded to 1.0.3, i had 1.0.0 , but when i uploaded all the files and tried to run upgrade.php it said ;
The upgrader was unable to obtain write access to Upgrade.php.
If you are using a linux or unix based server, please ensure that the file is chmod'd to 777.
If your server is running Windows, please ensure that the internet guest account has the proper permissions on it.
Click here to try again.
now i only use the xp ftp,, and dont know how to change the chmod settins using it ??
so then i tried using update instead of upgrade but then hit the problem i couldnt get onto my site... so i had to click all 9 of the permision boxes before it would allow me autherisation to see my site, now, i STILL cant run upgrade.php it says the same and have to have all 9 permission boxes ticked to see the forum, however the site seems to think it is 1.0.3 and i have lost all my mods ?
please help, the site is www.worldofcichlids.co.uk/forum
thanks
Kev
Wow, pressed the button and I'm running 1.0.3.
How long before all the mods catch up with this version?
Mark
Quote from: Kev on April 01, 2005, 05:51:15 PM
The upgrader was unable to obtain write access to Upgrade.php.
Settings.php?
How do I use chmod? (http://www.simplemachines.org/community/index.php?topic=23690.0)
-[Unknown]
yes sorry settings .php, but is it safe to run the server like that with all boxes ticked ? thanks, kev
Doh, im a dork, sorry.... i thought by CHModding the forum folder, it would do all the files, obviously i was wrong.... did settings.php on its own aswell and its sorted.... thanks.... sorry about that, is it safe to add the mods i had from 1.0.1 to 1.0.3 ? sorry for all the questions,
Kev
most should work.
Parse error: parse error, unexpected ';', expecting ')' in /...../Sources/ManagePermissions.php on line 1084
I uninstalled the mods updated through package manager and reapplied the mods. I got a similar error, so I uninstalled the Arcade mod and tried again, same error just on a different line.
When uninstalling Arcade I got this
1. Execute Modification index.php Success
2. Execute Modification Themes/default/index.template.php Success
3. Execute Modification Sources/Subs.php Success
4. Execute Modification Sources/ManagePermissions.php Success
5. Execute Modification Themes/default/languages/Modifications.english.php Failure
6. Execute Modification Themes/default/Display.template.php Success
7. Execute Modification Sources/Display.php Success
I've just checked through the file and there was an Arcade array still in there, so I've deleted it. Error line is 1077
Lines 1071 to 1077
),
'attachment' => array(
'view_attachments' => false,
'post_attachment' => false,
)
)
);
=) very good forum. I;m very glad that I changed ******in phpBB to this forum )))
Russia.
Quote from: Drakkar on April 03, 2005, 12:03:53 AM
=) very good forum. I;m very glad that I changed ******in phpBB to this forum )))
Russia.
Please don't curse. That said, glad you like SMF.
Updated all my forums (different versions, with max users: 3.000, max posts/thread: 13.500) to 1.0.3. All did fine! :)
Thanks a LOT!!
Quote from: nokonium on April 02, 2005, 05:09:22 PM
Parse error: parse error, unexpected ';', expecting ')' in /...../Sources/ManagePermissions.php on line 1084
Upload a clean version of ManagePermissions.php from the upgrade zip file. A mod you installed caused this problem, not the update.
-[Unknown]
Arcade I expect, thanks [UNKNOWN]
i'm new to using forums so who can help me out by giving me some sort of "walktrough" of how i should upgrade to 1.0.3.
tnx
What version are you currently running?
running 1.0 rc
On the downloads page, grab "Upgrade" package, upload the files then run upgrade.php and you will be on the current level.
upload in which folder?
Your SMF one, remember to overwrite old files.
Since upgrading to 1.0.3, some odd things have happened to my instant messenger links. The Yahoo symbol in the member list does not work, just displays a page of the little yahoo symbol.
On all views, pressing the AIM link results in getting a "aim is not a registered protocol" message.
Quote from: megacelt on April 04, 2005, 06:29:08 PM
Since upgrading to 1.0.3, some odd things have happened to my instant messenger links. The Yahoo symbol in the member list does not work, just displays a page of the little yahoo symbol.
On all views, pressing the AIM link results in getting a "aim is not a registered protocol" message.
Yahoo might be down; nothing changed with that.
You have to have aim *installed* for those links to work, guy ;).
-[Unknown]
thanks a lot!
ok..so i upload those 1.0.3 files. than i need to run the upgrade.php...how do i do this? in the explorer or in my ftp program..sorry..dont get it..and will all my subjects in my forum stay?
tnx anyway
Ah, of course for the AIM issue, however, not for Yahoo as several users have reported it as well for a few days.
Quote from: troep on April 05, 2005, 04:54:49 AM
ok..so i upload those 1.0.3 files. than i need to run the upgrade.php...how do i do this? in the explorer or in my ftp program..sorry..dont get it..and will all my subjects in my forum stay?
tnx anyway
Run the page in your browser (explorer) and it will guide you through.
Also you may consider getting firefox, link in my signature, much better browser. ;)
tnx
This is pretty embarassing, but I am not able to upgrade my smf
Currently at 1.0.2
I was able to upgrade easy enough last time, but I don't remember how I did it
I did try to find the help I needed here in the forum, but I can't seem to put it all together
I tried to upload the upgrade after downloading to my PC
The file transfer was all wacky-that is, the only way it would take the files is if I did them one at a time.
My ftp client is Fire FTP (FireFox extension)That got so confused, I hosed my site
After restoring from a backup, I have a message that I did not remove all of 1.0.3
If some very patient nice person would give me a hand, that would be great
Feel free to email me directly at
[email protected]
Quote from: nokonium on April 04, 2005, 02:26:30 AM
Arcade I expect, thanks [UNKNOWN]
It was caused by Arcade, uninstalling it still left the fault, in an arcade array, in the ManagePermissions file
Quote from: kathologist on April 05, 2005, 04:59:16 PM
I tried to upload the upgrade after downloading to my PC
The file transfer was all wacky-that is, the only way it would take the files is if I did them one at a time.
My ftp client is Fire FTP (FireFox extension)
That got so confused, I hosed my site
After restoring from a backup, I have a message that I did not remove all of 1.0.3
If some very patient nice person would give me a hand, that would be great
Feel free to email me directly at [email protected]
Heh, it happens sometimes. Have you considered trying a different FTP client, such as SmartFTP or FileZilla?
-[Unknown]
Hi,
Upgraded my forum no prroblems. Everything seems to be working alright, users ok, not reported anything.
Keep up the brilliant work guys and gals :)
Haha, was the "31337" topic id intentional or did that just happen by chance? (http://www.simplemachines.org/community/index.php?topic=31337.0). Either way, it's fitting. ;)
Seriously, it just happened. It's very funny, though.
-[Unknown]
Here is the difference in url output between the yahoo icon on a message:
http://messenger.yahoo.com/edit/send/?.target=theksman
and the url output from the member list:
http://opi.yahoo.com/online?u=theksman&m=g&t=0
The latter results only in the yahoo icon being displayed in the browser window, nothing else.
Also, both are not generating a new browser window, so it takes them from the site.
Finally, the http://messenger.yahoo.com/edit/send/?.target=theksman starts a new java instance of yahoo messenger, and if you already have messenger open, it fails.
I would really like to resolve this one as apparently my users really like this feature, as I am hearing from them about it not working :)
great job guys.. i just updated mine :)
Whew! Ok, I was terrified of upgrading. I was still using 1.0.1 and being new to all of this, I wasn't sure what changes I had made. I was using some mods and a different theme (which I did make changes to). I couldn't recall if I'd ever made changes to the default template or not (though I was at least 70% sure I hadn't). So, I held my breath and decided to try the upgrade via Package Manager. First thing I noticed was that I was going to be upgrading to 1.0.2. I thought about that for a few minutes and decided that must mean I needed to upgrade to it first, so I tried it. Worked like a charm. So...did the upgrade thing again, and sure enough, it now said I was going to be upgrading to 1.0.3. So, I went for it, and lickety-split, the thing was done and working perfectly. As far as I can tell, nothing went wrong with the mods either. What a beautiful experience! Thank you for such an easy upgrade!
I've run into a problem where the package installer requests FTP information to make files writeable. It appears to fail with the credentials I supply. I could CHMOD the files myself if I knew which files are causing the problem. I do not know for certain where the procedure is failing, other than that I continue to see the screen asking for FTP credentials.
Help would be greatly appreciated.
All the pre-tests say Success, but when I proceed, I get this messge:
2: copy(/home/gamedev/public_html/changelog.txt~): failed to open stream: Permission denied
File: /home/gamedev/public_html/Sources/Subs-Package.php
Line: 1285
I chmod everything to 777, and ran the fix_permissions.php tool, and still the same error.. Anything else I missed?
Thanks.
nevermind... i had to chmod to the public_html folder itself, to allow writing... thanks.
is there any uninstall? ???
Quote from: Web on April 20, 2005, 12:19:17 AM
is there any uninstall? ???
Why do you want to uninstall? All of the bugs that I had were fixed with 1.0.3. I personally wouldn't want to go back and have to manually fix the bugs.
IF for some reason you do want to go back to 1.02 I don't think there were any database changes so you could upload older files.
What is the server name and url for the package manager? I don't see you guys on my version! How do I add it? ???
Quote from: FinalSoul on April 25, 2005, 01:20:32 PM
Did anyone else notice that this is topic number 31337? :P
It's not new. There was already a post about it.
Have a problem with sessions, session does not saves, and working logout after cookie live time.
I don't know what's wrong but get:
Upgrading...
Creating new tables and inserting default data... Unsuccessful!
This query:
CREATE TABLE smf_log_search (
ID_SEARCH tinyint(3) unsigned NOT NULL default '0',
ID_TOPIC mediumint(8) unsigned NOT NULL default '0',
ID_MSG int(10) unsigned NOT NULL default '0',
relevance smallint(5) unsigned NOT NULL default '0',
num_matches smallint(5) unsigned NOT NULL default '0',
PRIMARY KEY (ID_SEARCH, ID_TOPIC)
) TYPE=MyISAM;
Caused the error:
Table 'smf_log_search' already exists
when triing to upgrade. I ran repair_settings.php but that didn't help to finish the upgrade. Is my forum ruined or can it be revived?
Now it says:
Upgrading the forum...
Don't worry, we will be back shortly with an updated forum. It will only be a minute ;).
I have just now discovered a bug in SMF 1.0.3 that I hadn't even noticed since the upgrade. Apparently, even when all regular members were "disallowed" to lock and delete topics, they could lock and delete the topics that they make. In order to fix it, I had to change the lock and delete own thread permissions from "disallow" to "deny". Everything is functioning fine now, but why were members granted these permissions when they were disallowed?
-Dan The man
Every member is in 2 groups. The post group and the regular members or another "special" group. If one group allows editing it must be denied in the other to prevent it.
Can someone tell me how to upgrade? PLEASE? The thing is not in my package manager! How do I upgrade?!? >:( :)
Quote from: egbakaet on April 29, 2005, 03:27:39 PM
Can someone tell me how to upgrade? PLEASE? The thing is not in my package manager! How do I upgrade?!? >:( :)
Upload upgrade package to your forum and run upgrade.php. If you are usin 1.0.2 version, use update package. Feel free to read manuals.
http://www.simplemachines.org/community/readme_update.html
http://www.simplemachines.org/community/readme_upgrade.html
>:( :)
Quote from: jroehl on April 11, 2005, 01:02:23 PM
I've run into a problem where the package installer requests FTP information to make files writeable. It appears to fail with the credentials I supply. I could CHMOD the files myself if I knew which files are causing the problem. I do not know for certain where the procedure is failing, other than that I continue to see the screen asking for FTP credentials.
http://www.simplemachines.org/community/index.php?topic=28393.0
Quote from: egbakaet on April 23, 2005, 10:40:04 PM
What is the server name and url for the package manager? I don't see you guys on my version! How do I add it? ???
You don't need it. It will show up before the servers or anything, on the front page of the package manager.
Quote from: digibike on April 27, 2005, 03:38:30 PM
I don't know what's wrong but get:
The upgrade script needs DROP privileges.
Quote from: OIDanTheManIO on April 28, 2005, 10:53:39 PM
I have just now discovered a bug in SMF 1.0.3 that I hadn't even noticed since the upgrade. Apparently, even when all regular members were "disallowed" to lock and delete topics, they could lock and delete the topics that they make. In order to fix it, I had to change the lock and delete own thread permissions from "disallow" to "deny". Everything is functioning fine now, but why were members granted these permissions when they were disallowed?
This is not a bug. Go to their profile and select "Show Permissions". Do not use deny if you're not absolutely sure you know what it means and want to use it. In this case, you could have moderators no longer able to lock or remove topics.
Quote from: megacelt on April 08, 2005, 02:38:00 PM
http://messenger.yahoo.com/edit/send/?.target=theksman
This sort of URL doesn't show up anywhere on my current tree, at least.
Quoteand the url output from the member list:
http://opi.yahoo.com/online?u=theksman&m=g&t=0
The URL I have is:
http://edit.yahoo.com/config/send_webmesg?.target=theksman
Which works fine for me?
QuoteFinally, the http://messenger.yahoo.com/edit/send/?.target=theksman starts a new java instance of yahoo messenger, and if you already have messenger open, it fails.
This doesn't happen for me? If it does, it's something you need to talk to Yahoo! about....
-[Unknown]
i couldn't see a difference from 1.0.2
i no longer make comment :P
Quote from: Midgard on May 01, 2005, 12:30:23 PM
i couldn't see a difference from 1.0.2
Read changelog.
I keep getting the following error when doing the automatic update:
1. Execute Modification ./changelog.txt File not found
Please help!
Well, upload that file to your forums root. You can get it from update package. http://www.simplemachines.org/download.php
Quote from: Owdy on May 04, 2005, 03:36:22 PM
Well, upload that file to your forums root. You can get it from update package. http://www.simplemachines.org/download.php
Or ignore it. ;)
let me see if i understand. everytime you guys some up with a new version, can we use the package admin to install the new versions or upgrades?
Quote from: mrichard on May 06, 2005, 08:55:47 PM
let me see if i understand. everytime you guys some up with a new version, can we use the package admin to install the new versions or upgrades?
Minor releases, yes. 1.1 will most likely not be available as a package manager update.
-[Unknown]
So, 1.1 will be a new installation then?
Quote from: ^Raven^ on May 09, 2005, 06:03:51 PM
So, 1.1 will be a new installation then?
No, you'll probably still be able to just upgrade from SMF 1.0.3.
-Dan The Man
Why should we make another version where no one can upgrade? ::)
Quote from: Daniel D. on May 09, 2005, 06:09:49 PM
Why should we make another version where no one can upgrade? ::)
Exactly :)!
-Dan The Man
i keep getting the following error when I try to install smf acrcade:
Table '*****.smf_games_caterogy' doesn't exist
File: /home/****/public_html/jamug/Sources/ArcadeAdmin.php
Line: 113
Note: It appears that your database may require an upgrade. Your forum files are currently at version SMF 1.0.3, whereas your database is at version SMF 1.0.2. It is recommended that you execute the latest version of upgrade.php.
At first i thought it was an smf arcade error because of the missing table - but then the notation mentioned something re the upgrade. I installed smf arcade AFTER upgrading by the way.
I also noticed [unknown]'s suggestion re upgrade.php but have no idea how to follow what he suggested... for us "slow"-bies could ya xplain a lil clearer?
Thanks guys.
It wouuld be wise to start new support topic or post here: http://www.simplemachines.org/community/index.php?topic=29619.0
This is news topic in news area ;)
The upgrade was really fast. Geat job!
I did get the Display.php since I modified the default theme but nothing seems to have changed to show that error. So I'm good :)
Thanks guys, SMF is awesome!
Quote from: Owdy on May 20, 2005, 03:06:59 PM
It wouuld be wise to start new support topic or post here: http://www.simplemachines.org/community/index.php?topic=29619.0
This is news topic in news area ;)
My apologies Owdy, it's just that part of the error has to do with the update - the last section sez that I have 1.0.3 files but 1.0.2 database.
Seeing as [Unknown] had replied to a similar problem earlier - but I was unclear on exactly what he was saying I decided to put it here.
Will post as suggested.
Ta.
;D
Howdy Guys and Gals! I'm a recent convert to SMF, have been running several other boards for a couple of years now and am just really tired of the amount of maintenance those "other guys" require. I've got my business board on XMB, and my online gaming community on phpBB. I doubt if I change the business forums over any time soon, but I've loaded a fresh new load of 1.03 and am VERY IMPRESSED!
This stuff's the 'poo'. (using nicer words than normal) I have two questions for the group here, and I apologize in advance if this is the wrong place for these:
- Another SMF user has told me that he got a conversion program or something from here, that allowed him to swing his phpBB board over to SMF without having to redo all his user accounts, etc. Is this true, and if so where do I get my grubby hands on it?
- I tried loading a couple of packages last night and immediately encountered some issues, specific to the SMF Arcade. Once loaded the board errored out, and it appears the Arcade package over-wrote the index.php file and the board showed reverted to 1.02 (I think). Anyway, the question is, do the 'upgrades' listed in the available packages not work with this version? I saw several that I'd like to attempt, but don't want to have to go through what I did last night.
I'm pretty good at working within the php and bbcode environment, if you ever had phpBB and had to modify your boards you'd know what I mean, I've spent hundreds of hours pouring over files on my previous board and was especially happy with SMF's way of handling updates, packages, etc.
I'd like to say I'm a 100% convert, but still on the fence post. Would like some more templates but I understand that SMF is farily new and maybe doesn't have a huge development team, so I might have to do some of my own. However, before going there I'd like to know that SMF is right for me. If anyone here can answer mainly the first question above would be most helpful.
Warmest wishes to all!! 8)
NOS ChromeNut, you are in the RIGHT place at the RIGHT time!
SMF is the BEST!
soon you will have the masters of SMF helping you out [uknown], owdy and all these guys. i am not that good as they are but soon i will get my hands myself on helping this community as well. but still ling journey to acheive.
hang in ther and i PROMISE YOU....
you won't get disppointed!
"May the SMF be with you"
...always....
by the way...I always have trouble remembering three things: faces, names, and... - I can't remember what the third thing was!
Quote from: NOS ChromeNut on May 22, 2005, 09:29:09 PM
- Another SMF user has told me that he got a conversion program or something from here, that allowed him to swing his phpBB board over to SMF without having to redo all his user accounts, etc. Is this true, and if so where do I get my grubby hands on it?
- I tried loading a couple of packages last night and immediately encountered some issues, specific to the SMF Arcade. Once loaded the board errored out, and it appears the Arcade package over-wrote the index.php file and the board showed reverted to 1.02 (I think). Anyway, the question is, do the 'upgrades' listed in the available packages not work with this version? I saw several that I'd like to attempt, but don't want to have to go through what I did last night.
There's the converter from phpBB in the downloads page.
http://www.simplemachines.org/download.php?converters
About the mod trouble, you should ask in the mod's topic, the author or other users of that mod, will help you, the answer may already be there even. HTH.
http://www.simplemachines.org/community/index.php?topic=37856.0
-[Unknown]