Simple Machines Community Forum

Customizing SMF => Graphics and Templates => Theme Site Themes => Topic started by: MLM on July 11, 2011, 01:10:01 PM

Title: Vertex
Post by: MLM on July 11, 2011, 01:10:01 PM
Link to the theme (http://custom.simplemachines.org/themes/index.php?lemma=2444)
(https://i.imgur.com/M8hWg0E.png)

Another Theme release, Vertex.

Support::
Visit VisualPulse.net (http://visualpulse.net/)

Full of jQuery effects including a Nav Bar Dropmenu and a awesome Search Bar!

Including Social Icon settings in the theme settings. Easily turn on/off and change URL's.
(https://i.imgur.com/FmueXTE.pngg)
Title: Re: Vertex
Post by: rocknroller on July 11, 2011, 01:14:41 PM
nice work.
Title: Re: Vertex
Post by: Crip on July 11, 2011, 01:31:18 PM
i like this one a lot. :)
Title: Re: Vertex
Post by: Jack_the_ripper on July 12, 2011, 09:32:09 AM
Greate theme but i've got a little problem.
i attached a picture and you will see the problem.

What is the sollution?

Jack
Title: Re: Vertex
Post by: Robert. on July 12, 2011, 03:33:12 PM
Awesome theme :)
Title: Re: Vertex
Post by: redwraith on July 19, 2011, 11:58:12 PM
This is a super nice theme. One thing though, when I go into theme settings and set my forum width to 100%, it stretches the right side of the page. After noticing this I re-installed it on a clean install of SMF, and it still does it. Does this happen to anyone else, or is it just me? I'm using both Opera and Firefox.
Title: Re: Vertex
Post by: MLM on July 28, 2011, 05:07:50 PM
Greate theme but i've got a little problem.
i attached a picture and you will see the problem.

What is the sollution?

Jack

Sorry for late response, I thought I had watched this topic but whatever.

This will happen if you have too much stuff on your nav bar. You could decrease the padding(css) on the items to fit all of your stuff.

This is a super nice theme. One thing though, when I go into theme settings and set my forum width to 100%, it stretches the right side of the page. After noticing this I re-installed it on a clean install of SMF, and it still does it. Does this happen to anyone else, or is it just me? I'm using both Opera and Firefox.

uhhh works fine for me in chrome and firefox...
Title: Re: Vertex
Post by: żεχเ๏ภ on September 05, 2011, 04:58:51 PM
http://mainmedia.neg0.ca/blastbox/index.php

Yeah, slight problem. The bar gradient on "User Info" "Top Posts" "Who's Online?" etc on Simple Portal don't stretch far enough, what is the solution for this?

Thanks,
Jason
Title: Re: Vertex
Post by: żεχเ๏ภ on September 07, 2011, 03:41:36 AM
http://mainmedia.neg0.ca/blastbox/index.php

Yeah, slight problem. The bar gradient on "User Info" "Top Posts" "Who's Online?" etc on Simple Portal don't stretch far enough, what is the solution for this?

Thanks,
Jason

Bump.
Title: Re: Vertex
Post by: ARG01 on September 07, 2011, 11:31:06 AM
Nice work, very clean.  ;)

http://mainmedia.neg0.ca/blastbox/index.php

Yeah, slight problem. The bar gradient on "User Info" "Top Posts" "Who's Online?" etc on Simple Portal don't stretch far enough, what is the solution for this?

Thanks,
Jason

Grab a copy of the portal.css file from the default themes css folder and place it in your current theme css folder.
Title: Re: Vertex
Post by: darcysarto on September 07, 2011, 05:56:03 PM
Hi, this a very nice looking theme. Having tried it out I found I could not get it to display my own logo, is there a reason for this? Also I have Facebook Connect mod installed and the login button went missing, would I need to re-install it?
Title: Re: Vertex
Post by: żεχเ๏ภ on September 08, 2011, 05:34:29 AM
Nice work, very clean.  ;)

http://mainmedia.neg0.ca/blastbox/index.php

Yeah, slight problem. The bar gradient on "User Info" "Top Posts" "Who's Online?" etc on Simple Portal don't stretch far enough, what is the solution for this?

Thanks,
Jason

Grab a copy of the portal.css file from the default themes css folder and place it in your current theme css folder.

Thanks a ton. +1  :)
Title: Re: Vertex
Post by: Flavious on October 14, 2011, 11:07:08 AM
When someone logs in, we have the option to show unread posts. My users are screaming bloody murder because the "view replies to your posts" option is missing. How and where can I add that back in?
Title: Re: Vertex
Post by: MLM on October 14, 2011, 04:15:39 PM
When someone logs in, we have the option to show unread posts. My users are screaming bloody murder because the "view replies to your posts" option is missing. How and where can I add that back in?

Uhh all you have to is add "?action=unread" to the url to index.php to get there. Or just add a link where ever you want with it.

Ex:
Code: [Select]
<a href="', $scripturl ,'?action=unread">View Unread</a>
Title: Re: Vertex
Post by: Flavious on October 14, 2011, 04:42:34 PM
When someone logs in, we have the option to show unread posts. My users are screaming bloody murder because the "view replies to your posts" option is missing. How and where can I add that back in?

Uhh all you have to is add "?action=unread" to the url to index.php to get there. Or just add a link where ever you want with it.

Ex:
Code: [Select]
<a href="', $scripturl ,'?action=unread">View Unread</a>

That's the same thing thing that is already there. The theme contains a link to Unread Posts. I need the link to "Show new replies to your posts"
Title: Re: Vertex
Post by: MLM on October 14, 2011, 05:51:21 PM
That's the same thing thing that is already there. The theme contains a link to Unread Posts. I need the link to "Show new replies to your posts"

Sorry misunderstood. In that case just use this: "?action=unreadreplies"
Title: Re: Vertex
Post by: Matthew K. on February 15, 2012, 04:24:20 PM
To anyone using this theme, it contains undefined errors out of the box, and depending on your settings, you will have continued problems using it.

Here is the fix, for anyone interested.

./Themes/Vertex-Theme2-0/index.template.php
Code: (Find) [Select]
if($settings['social_icons_present'])
{
echo '
<a class="social_icon floatright" target="_blank" href="', $settings['social_icon_facebook_url'] ,'">
<img src="', $settings['images_url'] ,'/vertex_image/social_facebook_icon.png" alt="" />
</a>
<a class="social_icon floatright" target="_blank" href="', $settings['social_icon_twitter_url'] ,'">
<img src="', $settings['images_url'] ,'/vertex_image/social_twitter_icon.png" alt="" />
</a>
';
}
Code: (Replace) [Select]
if (!empty($settings['social_icons_present'])) {
                        if (!empty($settings['social_icon_facebook_url']))
                            echo '
          <a class="social_icon floatright" target="_blank" href="', $settings['social_icon_facebook_url'] ,'">
                         <img src="', $settings['images_url'] ,'/vertex_image/social_facebook_icon.png" alt="" />
          </a>
                            ';
                        if (!empty($settings['social_icon_twitter_url']))
       echo '
                                <a class="social_icon floatright" target="_blank" href="', $settings['social_icon_twitter_url'] ,'">
          <img src="', $settings['images_url'] ,'/vertex_image/social_twitter_icon.png" alt="" />
            </a>
                            ';
}

Enjoy! :)
Title: Re: Vertex
Post by: MLM on February 16, 2012, 07:24:05 PM
Fixed the issue, Overlooked because I did not think someone would turn on the setting if the fields were blank.

Go download v1.1
Title: Re: Vertex
Post by: Matthew K. on February 16, 2012, 07:31:09 PM
Expect the unexpected :)
Title: Re: Vertex
Post by: Adrek on February 22, 2012, 09:17:07 AM
Great theme :)
There's still one hard coded text in index.template.php:
<a href="', $scripturl ,'?action=login">', $txt['vp_login'] ,'</a> or <a href="', $scripturl ,'?action=register">', $txt['vp_register'] ,'</a>

;)
Title: Re: Vertex
Post by: NanoSector on February 22, 2012, 09:29:13 AM
Great theme, I installed it on my site, adjusted my logo and it looks really great :)
Title: Re: Vertex
Post by: MLM on February 22, 2012, 03:38:06 PM
Great theme :)
There's still one hard coded text in index.template.php:
<a href="', $scripturl ,'?action=login">', $txt['vp_login'] ,'</a> or <a href="', $scripturl ,'?action=register">', $txt['vp_register'] ,'</a>

;)

Its fine,  not all text needs to be a text string especially for small characters. Creates redundancy.
Title: Re: Vertex
Post by: NanoSector on February 22, 2012, 03:42:04 PM
Could you please fix the "Undefined index" errors in the next version?

I already fixed it on my site, but with my latest mod installed (which adds an Error Log counter into the Admin menu button) I was starting to get worried about what was happening ::)

In fact, it only requires you to put an empty() around the variable, like this:
Code: [Select]
if (!empty($settings['social_icons_present']))
Title: Re: Vertex
Post by: MLM on February 22, 2012, 03:43:26 PM
Could you please fix the "Undefined index" errors?

I already fixed it on my site, but with my latest mod installed (which adds an Error Log counter into the Admin menu button) I was starting to get worried about what was happening ::)

Already been fixed... read a couple posts up and download 1.1
Title: Re: Vertex
Post by: Adrek on February 22, 2012, 04:06:39 PM
Its fine

Quote
// Vertex text file because we cant have hard coded text...

if you say so... but if someone uses this theme on site (like I do) and uses also different language than English (I'm using Polish) then I have to manual edit index.template.php because this text is not in ThemeStrings. For me it's fine, but just think about it...
Title: Re: Vertex
Post by: NanoSector on February 22, 2012, 04:07:40 PM
Could you please fix the "Undefined index" errors?

I already fixed it on my site, but with my latest mod installed (which adds an Error Log counter into the Admin menu button) I was starting to get worried about what was happening ::)

Already been fixed... read a couple posts up and download 1.1
I downloaded the theme today, and the issue was still in there.
Title: Re: Vertex
Post by: MLM on February 22, 2012, 04:18:03 PM
I downloaded the theme today, and the issue was still in there.

if you say so... but if someone uses this theme on site (like I do) and uses also different language than English (I'm using Polish) then I have to manual edit index.template.php because this text is not in ThemeStrings. For me it's fine, but just think about it...

welp, just added it so 1.2  8)

- Fixed undefined
- Added the or language string
Title: Re: Vertex
Post by: Matthew K. on February 22, 2012, 04:25:26 PM
Could you please fix the "Undefined index" errors in the next version?

I already fixed it on my site, but with my latest mod installed (which adds an Error Log counter into the Admin menu button) I was starting to get worried about what was happening ::)

In fact, it only requires you to put an empty() around the variable, like this:
Code: [Select]
if (!empty($settings['social_icons_present']))
I had to install this theme on someone's website, and I fix any and all errors that are encountered, even if it's the mods/themes fault. So I posted the fixes for MLM earlier, which he applied.

Also - To be politically correct? Very few inline text strings are allowed. (Copyrights, or unique names such as a company, etc. which would not be translated anyways). So in this case "Or" would need to be translated.
Title: Re: Vertex
Post by: NanoSector on February 22, 2012, 04:27:02 PM
Could you please fix the "Undefined index" errors in the next version?

I already fixed it on my site, but with my latest mod installed (which adds an Error Log counter into the Admin menu button) I was starting to get worried about what was happening ::)

In fact, it only requires you to put an empty() around the variable, like this:
Code: [Select]
if (!empty($settings['social_icons_present']))
I had to install this theme on someone's website, and I fix any and all errors that are encountered, even if it's the mods/themes fault. So I posted the fixes for MLM earlier, which he applied.
Apparently not in my theme, then, as the issue was still going. The issue with the Facebook and Twitter icons was solved in the template I got, but not that issue.
Title: Re: Vertex
Post by: kent[ka] on February 22, 2012, 11:20:31 PM
Well, looks like i have 2-0-2-v1-1 and not 2-0-2-v1-2  Do i need to uninstall the old one for the upgrade or how can i do it?
Title: Re: Vertex
Post by: MLM on February 22, 2012, 11:22:59 PM
Well, looks like i have 2-0-2-v1-1 and not 2-0-2-v1-2  Do i need to uninstall the old one for the upgrade or how can i do it?

Just install the new one and apply that theme. They will be called the same thing so you may want to delete them. But if you look at the paths they will be different.
Title: Re: Vertex
Post by: kent[ka] on February 22, 2012, 11:34:34 PM
Okay, i will remove the old one then, thanks for the fast reply. :D
Title: Re: Vertex
Post by: impreza on February 24, 2012, 04:54:52 AM
nice style, very like his colors. Blue is cool
Title: Re: Vertex
Post by: OnzeDanny on February 24, 2012, 08:16:15 AM
Cool this theme! Congrats !!!  8)
Title: Re: Vertex
Post by: Flavious on February 24, 2012, 05:18:27 PM
Hello all;

I have members all telling me they are not getting any email notifications. Where in the world in the vertex admin screens are the settings for email off the server? Or where else do I look for how SMF is sending emails?
Title: Re: Vertex
Post by: MLM on February 24, 2012, 05:20:19 PM
Hello all;

I have members all telling me they are not getting any email notifications. Where in the world in the vertex admin screens are the settings for email off the server? Or where else do I look for how SMF is sending emails?

Nothing to do with the theme. The admin menus are untouched.
Title: Re: Vertex
Post by: Skyflash on March 05, 2012, 07:29:33 AM
Great theme! I'm using it on my new project (i'm newbie of SMF, sorry if i'm asking something stupid :) ) at this address doaitalia.it

I'm using Vertex theme combined with ADK Portal modification. Everything seems good with your theme, but i'm having a little problem with the ADK Portal function that permits me showing its sidebar into the forum (sorry for my bad english... i attach an image for better explain)

(http://dl.dropbox.com/u/1174908/adkvertex.jpg)

I've tried some other themes, the adk portal's right colum is correctly sown in the forums, but not in Vertex.
Is not a great problem, i'm simply asking you if maybe a mistake in the theme sources, or it don't use the same function called by adk portal.

Oh, i have another question: i've set a background image url in the theme settings:

(http://dl.dropbox.com/u/1174908/vertexbg.jpg)

but the only way i've found for displaying it (i know, it's horrible logo... i must redo it :) ) was manual editing of the index.php :(
Title: Re: Vertex
Post by: Demonic722 on March 05, 2012, 07:19:54 PM
Oh, i have another question: i've set a background image url in the theme settings:

(http://dl.dropbox.com/u/1174908/vertexbg.jpg)

but the only way i've found for displaying it (i know, it's horrible logo... i must redo it :) ) was manual editing of the index.php :(
I like this theme as well and I plan to use it on my site as soon as I get more info as to how to fix some of the errors I'm experiencing as well. One of the errors I found was the Logo display as well. I couldn't get it to work in the SMF settings, but I copied the path of where the "Vertex" Logo was loading from and replaced it.

@Skyflash, if you're unsure as to where it is, look here:
Code: [Select]
/Themes/Vertex-Theme2-0-2-v1-2/images/vertex_image/banner_logo.png

I simply replaced the "banner_logo.png" file with my own picture and renamed it to "banner_logo.png" and it worked. Its not as efficient as manually uploading the path of your image and pasting it into the SMF Settings, but it works.

Another problem would be in the menu bar. I've taken a snip of the error I'm getting:
(http://i.imgur.com/s57lt.png)

I'm not sure what's causing that, but is there a way it could be fixed? It's only working like that on my current site, but I've tried it on a fresh SMF and everything worked fine...Also, the scroll thing (I'm not sure what it's called) is supposed to follow the cursor of the mouse in the menu bar, but on my site, it doesn't (it does on the fresh SMF though).

Some Background Information:
- I'm running SMF Version 2.0.2. It's not a fresh SMF Site, but rather an upgrade from Version 2.0.1. I'm not sure if that's the problem or not..

- I'm running SimplePortal on my site so if that's causing an issue, let me know.

Thanks in advance! :)
Title: Re: Vertex
Post by: Skyflash on March 06, 2012, 04:15:01 AM
@Skyflash, if you're unsure as to where it is, look here:
Code: [Select]
/Themes/Vertex-Theme2-0-2-v1-2/images/vertex_image/banner_logo.png

I simply replaced the "banner_logo.png" file with my own picture and renamed it to "banner_logo.png" and it worked. Its not as efficient as manually uploading the path of your image and pasting it into the SMF Settings, but it works.
I preferred modify the index.php file, but the result was the same :)

Quote
Another problem would be in the menu bar. I've taken a snip of the error I'm getting:
(http://i.imgur.com/s57lt.png)

I'm not sure what's causing that, but is there a way it could be fixed?
As i said, i'm new to SMF and its framework, but in my Wordpress and Joomla experience, i thik maybe related to a Javascript library you load in your forum.

Vertex uses jQuery. Look if you're loading the same library twice (other mods that uses jQuery, mooTools etc?) and if the two libraries has different versions.
Title: Re: Vertex
Post by: Skyflash on March 06, 2012, 06:21:18 AM
I'm not sure what's causing that, but is there a way it could be fixed? It's only working like that on my current site, but I've tried it on a fresh SMF and everything worked fine...Also, the scroll thing (I'm not sure what it's called) is supposed to follow the cursor of the mouse in the menu bar, but on my site, it doesn't (it does on the fresh SMF though).
Install this Chrome Extension (https://chrome.google.com/webstore/detail/homgcnaoacgigpkkljjjekpignblkeae) and reload the page

You should see all the javascript libraries your site is loading (see the attached picture)
Title: Re: Vertex
Post by: Skyflash on March 06, 2012, 07:10:49 AM
@MLM: other question: i war reading the source code, and i find that you set

Code: [Select]
<meta name="robots" content="noindex" />

in the forum sections and topics

I'm a blogger and not a forum admin, but i don't understand why. So... why? :D
Title: Re: Vertex
Post by: OnzeDanny on March 06, 2012, 01:06:21 PM
@MLM: other question: i war reading the source code, and i find that you set

Code: [Select]
<meta name="robots" content="noindex" />

in the forum sections and topics

I'm a blogger and not a forum admin, but i don't understand why. So... why? :D

This is written in all the SMF themes.

You can find the answer here (http://www.simplemachines.org/community/index.php?topic=452021.msg3157264#msg3157264)

Quote
SMF has the noindex thing there because of the PHP session ID in the URL

Quote
    SMF is designed in such way that you don't get duplicate content, just refresh your index page and you will find noindex gone. Explain further, though you are on index page, but its not the actual index url and hence SMF is saying not to index it.
;) Danny
Title: Re: Vertex
Post by: Demonic722 on March 06, 2012, 08:22:32 PM
I'm not sure what's causing that, but is there a way it could be fixed? It's only working like that on my current site, but I've tried it on a fresh SMF and everything worked fine...Also, the scroll thing (I'm not sure what it's called) is supposed to follow the cursor of the mouse in the menu bar, but on my site, it doesn't (it does on the fresh SMF though).
Install this Chrome Extension (https://chrome.google.com/webstore/detail/homgcnaoacgigpkkljjjekpignblkeae) and reload the page

You should see all the javascript libraries your site is loading (see the attached picture)
Thanks for the link. When I used the tool, the only thing that came up was SMF and jQuery 1.7.1.

Edit: I found out why it was doing that. You can't have the Mod "Sisyphus" installed on your SMF Forum and use this Theme at the same time..

Edit 2: Nor can you have "FancyBox 4 SMF" installed..
Title: Re: Vertex
Post by: drfun on March 08, 2012, 11:42:55 AM
Very nice theme,
Please is there a way to remove the vertex or replace it with your forum logo?
Title: Re: Vertex
Post by: punchy on March 16, 2012, 05:35:52 PM
Hi everyone,

Just a quickie here for the designer guys,

I need to expand the horizontal bar that runs accross the top of this design and make it larger to accomate my forums logo, I don't want to make the logo smaller but the current size makes it overlap the menu tabs  ???

Take a peek

(http://i475.photobucket.com/albums/rr114/ukbusinesslive/forum-2.png)

Any ideas
Title: Re: Vertex
Post by: NanoSector on March 16, 2012, 06:11:26 PM
Hi everyone,

Just a quickie here for the designer guys,

I need to expand the horizontal bar that runs accross the top of this design and make it larger to accomate my forums logo, I don't want to make the logo smaller but the current size makes it overlap the menu tabs  ???

Take a peek

(http://i475.photobucket.com/albums/rr114/ukbusinesslive/forum-2.png)

Any ideas
I also tried to do that with my higher logo, seems it requires editing the CSS file + stretching an image. No idea how to do that so I just resized my logo.
Title: Re: Vertex
Post by: agiffey on March 18, 2012, 08:01:18 PM
I like how this forum looks with the width set at 75% but the top bars stay at 100%. How would I make the menu bar and top bars the same size (width) as the rest of the forum? I can change the header css from 100% to 75% but it then floats left. I am not sure how to keep it centered over the main page.

Thanks
Art   
Title: Re: Vertex
Post by: drfun on March 24, 2012, 01:41:00 AM
When someone logs in, we have the option to show unread posts. My users are screaming bloody murder because the "view replies to your posts" option is missing. How and where can I add that back in?

Uhh all you have to is add "?action=unread" to the url to index.php to get there. Or just add a link where ever you want with it.

Ex:
Code: [Select]
<a href="', $scripturl ,'?action=unread">View Unread</a>
Not very clear can you throw more light on this.
Title: Re: Vertex
Post by: NanoSector on March 24, 2012, 05:59:57 AM
When someone logs in, we have the option to show unread posts. My users are screaming bloody murder because the "view replies to your posts" option is missing. How and where can I add that back in?

Uhh all you have to is add "?action=unread" to the url to index.php to get there. Or just add a link where ever you want with it.

Ex:
Code: [Select]
<a href="', $scripturl ,'?action=unread">View Unread</a>
Not very clear can you throw more light on this.
The option's still there, just a link needs to be made.

Where do you want the links to appear?
Title: Re: Vertex
Post by: sirkiu on March 25, 2012, 11:59:36 PM
Really nice job!!

When someone is going to post, the box field to write the message is too wide and I can read what I am writing. I attach an image to explain It better.
Title: Re: Vertex
Post by: MLM on March 29, 2012, 11:53:10 AM
A reminder on copyright removal.

If you remove the copyright on the theme, prepare for further action!

YOU CAN NOT REMOVE THE COPYRIGHT!
Title: Re: Vertex
Post by: Skyflash on March 29, 2012, 12:25:09 PM
Hey, hey, calm down man...

I don't remember if i've really removed your copyright, or if maybe do by a mod, or something else. I was learning SMF, about 3 weeks ago, and it's possible i've modified your theme. Or not.

Send me your code snippet and i'll put again in the theme. In your theme that is only my testing theme and that, at this point, don't will be the definitive one.

Only a thing: i've read all your php files, and i've not seen ANY LICENCE about the copyright removal. So i'm telling you that i put it again (send me the snippet), but without the presence of a licence, i can remove it legally.

Remeber it, please
Title: Re: Vertex
Post by: Skyflash on March 29, 2012, 12:34:33 PM
A reminder on copyright removal.

If you remove the copyright on the theme, prepare for further action!

YOU CAN NOT REMOVE THE COPYRIGHT!
You sent me a PM with this text:
Quote
You must re-instate the original copyright of the theme. Failing to do so immediately will result in further action.

You used the word "immediatly". Ok, now i'm wainting IMMEDIATLY you send me your code snippet, as i requested.
You can't say me thai i have to correct "immediatly" my fraud, if you can't "immediatly" send me the code you are telling i've removed.

Send me the snippet. I'll reinstall "immediatly"
Title: Re: Vertex
Post by: Skyflash on March 29, 2012, 12:57:44 PM
45 minutes are gone. You're not able to send me your snippet "immediatly", as i've asked. You sentenced me for the copyright reinstall, and you're not able to answer me in the same ("immediatly") time.

As you don't give particular support on your work in this topic, you can't support people you menace with your messages. Let me say, man... you need drinking some (many?) chamomiles, because you're too stressed.

As you may consider with your eyes, my forum is full of external mods copyrigths, so the lack of your could just be a mistake. You have not been able to respond "immediately", as you claim but the other people, so i corrected the error myself.

And do not worry: when I have my final theme, your theme (and your copyright) will disappear forever from my forum

See ya, man
Title: Re: Vertex
Post by: Ashley S on March 30, 2012, 10:40:15 AM
Hello guys.
Nice theme you have here MLM.

Just wondering since the borders are very thin white, is there a way you could change it to a thin black so it stands out more?
The borders look plain around the hedges. ;)

Thanks.
Title: Re: Vertex
Post by: MLM on March 31, 2012, 09:13:26 PM
Hello guys.
Nice theme you have here MLM.

Just wondering since the borders are very thin white, is there a way you could change it to a thin black so it stands out more?
The borders look plain around the hedges. ;)

Thanks.

Be my guest.. You would need to change all of the images that the theme uses (mostly the ones in the vertex_image folder) and images/theme/main_block.png
Title: Re: Vertex
Post by: chr05210084 on April 05, 2012, 09:46:46 PM
Thanks for creating this awesome theme MLM. Can you please help me with my small problem. The jquery function stops if I install Fancybox 4 SMF mod. How  can I fix it?

Thanks.
Title: Re: Vertex
Post by: rll on April 07, 2012, 04:29:48 PM
Greate theme but i've got a little problem.
i attached a picture and you will see the problem.

What is the sollution?

Jack


Sorry for late response, I thought I had watched this topic but whatever.

This will happen if you have too much stuff on your nav bar. You could decrease the padding(css) on the items to fit all of your stuff.

_____________________________________________________________________________________________________________


Could you please direct me to which css this setting is in I'm using Vertex-Theme2-0-2-v1-2 - indes.css or rtl.css?
Also the name of the div or class that the padding needs to be changed?

Thank you.
Title: Re: Vertex
Post by: Robert. on April 07, 2012, 05:29:27 PM
When you are using an RTL language it's rtl.css. If not, it's index.css. :)
Title: Re: Vertex
Post by: rll on April 07, 2012, 09:52:47 PM
With the Vertex theme under CSS both are listed?  So it would seem that I would need to know which css along the div or class tag that the padding is under that needs to be changed?

Title: Re: Vertex
Post by: rll on April 10, 2012, 02:22:58 PM
Bump.

If I need to put this under a different board or ask the developer directly would someone please let me know.

Thank you.
Title: Re: Vertex
Post by: MLM on April 14, 2012, 11:11:31 PM
With the Vertex theme under CSS both are listed?  So it would seem that I would need to know which css along the div or class tag that the padding is under that needs to be changed?

I have no idea what that means..
Title: Re: Vertex
Post by: drfun on April 16, 2012, 08:47:15 AM
When someone logs in, we have the option to show unread posts. My users are screaming bloody murder because the "view replies to your posts" option is missing. How and where can I add that back in?

Uhh all you have to is add "?action=unread" to the url to index.php to get there. Or just add a link where ever you want with it.

Ex:
Code: [Select]
<a href="', $scripturl ,'?action=unread">View Unread</a>
Not very clear can you throw more light on this.
The option's still there, just a link needs to be made.

Where do you want the links to appear?
i will like to place it on the menu bar.
Title: Re: Vertex
Post by: MLM on April 16, 2012, 04:05:57 PM
i will like to place it on the menu bar.

refrain from nested quotes...

Just look at the index.template.php. Put your code in .topbar_floatright_holder or wherever you want. Trial and error and look at how I did things already..

Title: Re: Vertex
Post by: Whiffmeister on April 27, 2012, 08:15:39 AM
Nice theme and very professional looking.

I am getting a lot of errors saying the topnav_bg.gif in my httpd error_log. This is referenced in the css/index.css file but I can't find it as part of the theme installation. It's annoying as it's masking any actual errors with the platform having to sift through. Should this file be there?

I am using Vertex-Theme-2-0-2-v1-2
Title: Re: Vertex
Post by: MLM on April 27, 2012, 03:28:56 PM
Nice theme and very professional looking.

I am getting a lot of errors saying the topnav_bg.gif in my httpd error_log. This is referenced in the css/index.css file but I can't find it as part of the theme installation. It's annoying as it's masking any actual errors with the platform having to sift through. Should this file be there?

I am using Vertex-Theme-2-0-2-v1-2

It is not supposed to be included and it is not used. A missing image in css is not really an issue but thanks for the catch.
Title: Re: Vertex
Post by: drfun on May 14, 2012, 07:14:31 AM
@MLM thanks for your respond to my initial question, am grateful. However i still have a little issue again, recently i noticed my site is not redirecting to www.mysite.com when the url is typed without www (that is if its typed for example mysite.com), i did a little search and saw this codes but i dont know how and where to place it. or which of the code will solve the problem. this are the codes
Code: [Select]
RewriteCond %{HTTP_HOST} ^www\.xxxx\.website\.com [NC]
RewriteRule (.*) http://xxxx.website.com/$1 [R=301,L]
RewriteCond %{HTTP_HOST} ^www\.yyyy\.website\.com [NC]
RewriteRule (.*) http://yyyy.website.com/$1 [R=301,L]

i will be grateful if am given some help on this. thanks
Title: Re: Vertex
Post by: MLM on May 14, 2012, 03:35:34 PM
@MLM thanks for your respond to my initial question, am grateful. However i still have a little issue again, recently i noticed my site is not redirecting to www.mysite.com when the url is typed without www (that is if its typed for example mysite.com), i did a little search and saw this codes but i dont know how and where to place it. or which of the code will solve the problem. this are the codes
Code: [Select]
RewriteCond %{HTTP_HOST} ^www\.xxxx\.website\.com [NC]
RewriteRule (.*) http://xxxx.website.com/$1 [R=301,L]
RewriteCond %{HTTP_HOST} ^www\.yyyy\.website\.com [NC]
RewriteRule (.*) http://yyyy.website.com/$1 [R=301,L]

i will be grateful if am given some help on this. thanks

This has nothing to do with the theme. http://www.simplemachines.org/ is simply a sub-domain like http://custom.simplemachines.org/
Title: Re: Vertex
Post by: drfun on May 16, 2012, 03:01:08 PM
ok, but any idea on how i can fix this, i notice my site is not redirecting non www. to www, i mean, if i type www.mysite.com the site loads but if i type http://mysite.com it gives me this error
Quote
Internal Server Error

The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator, webmaster@mysite.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.

More information about this error may be available in the server error log.

Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

but this has not been the case before
Title: Re: Vertex
Post by: MLM on May 16, 2012, 03:30:50 PM
but this has not been the case before

Post in the server configuration board: http://www.simplemachines.org/community/index.php?board=86.0
Title: Re: Vertex
Post by: Iomega0318 on May 22, 2012, 11:49:50 AM
Noticed an error when installing packages, you can barely see the additional theme names.
Image attached.
Title: Re: Vertex
Post by: MLM on May 22, 2012, 04:36:37 PM
Noticed an error when installing packages, you can barely see the additional theme names.
Image attached.

I did not see what was wrong for a while... Should of said it was a styling mistake.
Title: Re: Vertex
Post by: Iomega0318 on May 22, 2012, 05:57:11 PM
Noticed an error when installing packages, you can barely see the additional theme names.
Image attached.

I did not see what was wrong for a while... Should of said it was a styling mistake.
Oh sorry lol, was in a hurry this morning.
Title: Re: Vertex
Post by: Iomega0318 on May 23, 2012, 08:44:01 PM
How did you create the logo? I would love to replicate it with my sites name.. any way you could provide a source file for it?
Title: Re: Vertex
Post by: MLM on May 23, 2012, 09:14:17 PM
How did you create the logo? I would love to replicate it with my sites name.. any way you could provide a source file for it?

Post up a request on Visual Pulse and I can upload the psd: http://visualpulse.net/forums/index.php?board=6.0
Title: Re: Vertex
Post by: Iomega0318 on May 24, 2012, 01:01:10 AM
Ok done:
http://visualpulse.net/forums/index.php?topic=272.0
Title: Re: Vertex
Post by: Iomega0318 on May 27, 2012, 10:38:00 PM
Have you had a chance to look into the package installer coding?
Also not sure if your aware but the links in the header get messed up if you have a lot and look at it on a smaller screen.. I attached an image from my phone..
Title: Re: Vertex
Post by: MLM on May 27, 2012, 10:51:27 PM
Have you had a chance to look into the package installer coding?
Also not sure if your aware but the links in the header get messed up if you have a lot and look at it on a smaller screen.. I attached an image from my phone..

I'm not worried about the package installer. Its probably an easy css fix that you could do yourself. Maybe if I release another version I will do it but right now its not an issue.

Nothing I can do about that besides hiding what is left over on the nav bar... Don't clutter your nav bar and you will be fine.
Title: Re: Vertex
Post by: drfun on May 28, 2012, 06:43:06 AM
@MLM i was able to fix the non www. redirect i complain of last time, thanks for directing me to the approprate board. Actually the problem was not from the theme.
However i have another question, how do i replace the search bar. i wish to use a google search bar there instead. thanks in advance.
Title: Re: Vertex
Post by: MLM on May 28, 2012, 03:26:04 PM
@MLM i was able to fix the non www. redirect i complain of last time, thanks for directing me to the approprate board. Actually the problem was not from the theme.
However i have another question, how do i replace the search bar. i wish to use a google search bar there instead. thanks in advance.

Just delete all the search bar code and put the google one in there...
Title: Re: Vertex
Post by: drfun on May 28, 2012, 06:47:17 PM
Where and in which of the file please thanks
Title: Re: Vertex
Post by: MLM on May 28, 2012, 06:59:45 PM
Where and in which of the file please thanks
index.template.php
Title: Re: Vertex
Post by: drfun on May 28, 2012, 07:06:31 PM
ok, i will work on that. thanks
Title: Re: Vertex
Post by: emrahseral on December 13, 2012, 02:54:02 PM
Hi everyone. Before I post, I must warn you I am a novice.

Question: Is it normal for the Vertex theme to NOT have a messageindex.template.php file?

I ask because the CBI mod (Custom Board Icons) requires a modification in said file.

Any help is appreciated, thanks.
Title: Re: Vertex
Post by: NanoSector on December 13, 2012, 03:30:36 PM
Hi everyone. Before I post, I must warn you I am a novice.

Question: Is it normal for the Vertex theme to NOT have a messageindex.template.php file?

I ask because the CBI mod (Custom Board Icons) requires a modification in said file.

Any help is appreciated, thanks.
Hello, welcome to SMF!

This is completely normal. The Vertex theme uses the file from the default theme, that is Themes/default/messageIndex.template.php. You should edit that file instead.
Title: Re: Vertex
Post by: emrahseral on December 13, 2012, 03:50:08 PM
Thanks for the welcome and info Yoshi  :) Unfortunately it didn't solve my problem.

I tried modifying the messageindex.template.php in the Default folder as well as copying the same messageindex.template.php into the Vertex folder but nada. All I get is the attached result for my CBI efforts.

While I have you here, might you be able to help me out with this CBI business?
Title: Re: Vertex
Post by: NanoSector on December 13, 2012, 04:20:24 PM
I don't know how the CBI mod works unfortunately. What you can try is to copy the same images in each theme, also check where the image is supposed to be by right clicking and selecting Image Information or similar. You should ask for support atthe original author of the mod if that doesn't help you out I'm afraid, which he provides at http://www.smfhelper.info/ if I got the address right. Good luck :)
Title: Re: Vertex
Post by: emrahseral on December 13, 2012, 04:35:06 PM
Thanks Yoshi, I appreciate it.
Title: Re: Vertex
Post by: emrahseral on December 14, 2012, 07:48:23 AM
Hi MLM and users of Vertex, how's it going?

Well...I use 2.0.2 and also run the Vertex theme (mighty aesthetic theme too).

As visually pleasing as it is, I have a problem with board titles and the "unread posts" link getting molded together. You can see the situation for BEFORE logging in and AFTER logging in the attached files.

This issue arose after I installed and ran Custom Boards Icons. Last night me and Bigguy (CBI's author) did a serious back and forth until I was able to run the mod and, after we were able to get the icons up but with the board titles and Uread Posts link coming up jumbled, he advised me to come here to seek support from the theme's author. It is also important to point out that his mod requires a change in the boardindextemplate.php and messageindex.template.php files of Vertex. Since Vertex doesn't have a messageindex.php file, we only changed the boardindex.template.php file.

This being the case, he said: "... If you replace it [the modified boardindex.template.php] with an unmodified version and that error corrects itself then it is the mod somehow. If not then it is the theme..."

So, I changed the boardindex.template.php back to it's original state but the problem persisted. So, as far as Bigguy's opinion goes, this is an issue with the theme, and not the mod.

Would anyone happen to know how to remedy this?

Thanks in advance.
Title: Re: Vertex
Post by: MLM on December 14, 2012, 04:20:35 PM
Hi MLM
...
Thanks in advance.

Revert back to the original boardIndex template and make the changes manually. The reason this theme is so visually pleasing is because it is custom. Custom means that you are going to have problems with mods made for the default themes.

Look at what the mod is trying to do to the boardIndex and implement it so it fits correctly.
Title: Re: Vertex
Post by: emrahseral on December 14, 2012, 04:38:17 PM
Hi MLM, thanks for getting back to me.

Revert back to the original boardIndex template and make the changes manually.

Please bear with me, I'm an uber-rookie. When you say "...make the changes manually..." what exactly does that mean? (Sorry).

Look at what the mod is trying to do to the boardIndex and implement it so it fits correctly.

Now I know how my 6 year old feels when I try to explain something to her that is as clear as day to me :( Please elaborate on this too MLM.

Thank you.

Title: Re: Vertex
Post by: MLM on December 14, 2012, 06:23:51 PM
Hi MLM,
Please bear with me, I'm an uber-rookie. When you say "...make the changes manually..." what exactly does that mean? (Sorry).
Thank you.

On the mod site (http://custom.simplemachines.org/mods/index.php?mod=511) parse the instructions
(http://img856.imageshack.us/img856/7913/cbiv05customboardicons.png)

After that look for the edits to BoardIndex.template.php

Since it looks like it just has one edit it should be easy to implement. Find where the board icons are on the Vertex Theme and then paste anything that the mod adds. It may not be necessary to add all of it.
Title: Re: Vertex
Post by: emrahseral on December 14, 2012, 06:34:42 PM
Aw damn, I forgot to come back here and say I had resolved the issue-terribly sorry MLM. And thank you for spelling it out for me.

Title: Re: Vertex
Post by: gp10 on January 08, 2013, 08:44:35 PM
Hi, I have two questions

1 - How can I translate the word "Search" inside Search Box? I translate the smf forum and the file inside languages theme like "View Inbox", " Welcome, Guest!" but i can't find the word "Search"

2 - How can I down the logo? I check the css and when I want down my logo in "banner_logo" the logo doesn't move and the search box down (?! lol)
Title: Re: Vertex
Post by: ViewFromTheBoundary on March 31, 2013, 04:17:56 PM
Hi,

I'm new to SMF and I have installed the Vertex theme (which looks great by the way!) But after I have installed it the alerts system I have disappears, and so does the shoutbox (http://custom.simplemachines.org/mods/index.php?mod=1295), please could someone give me some guidance how to resolve this issue.

Both are by the SMFPacks team

Thanks Alex

Title: Re: Vertex
Post by: kat on March 31, 2013, 04:23:07 PM
Mods only get installed to themes, if the Mods are installed after the themes are, for reasons that are logical, if you think about it. ;)

You can either go to the mod's download page and check-out the parser, so that you can install the mods, manually, or you can uninstall the mods and reinstall them, getting it to install on the new themes.

In a custom theme, there shouldn't be too many edits. Probably, just to index.template.php (Although there may be others)
Title: Re: Vertex
Post by: ViewFromTheBoundary on March 31, 2013, 05:06:31 PM
Mods only get installed to themes, if the Mods are installed after the themes are, for reasons that are logical, if you think about it. ;)

You can either go to the mod's download page and check-out the parser, so that you can install the mods, manually, or you can uninstall the mods and reinstall them, getting it to install on the new themes.

In a custom theme, there shouldn't be too many edits. Probably, just to index.template.php (Although there may be others)

I have uninstalled the mods like you said, installed the theme and then added the mods back in again, however this did not solve the issue.

Would an edit need to be made to the vertex theme via the templates? As in, is this theme a 'custom theme' as you say.
Title: Re: Vertex
Post by: kat on March 31, 2013, 05:19:44 PM
Exactly that, yes. I'd've thought the reinstall would've worked, though, unless you didn't check the boxes for it to be installed on the other theme(S).
Title: Re: Vertex
Post by: ViewFromTheBoundary on March 31, 2013, 05:30:03 PM
Exactly that, yes. I'd've thought the reinstall would've worked, though, unless you didn't check the boxes for it to be installed on the other theme(S).

It was the tick in the box that I didnt do, thanks for that!

Second question, how would you get the shoutbox to the bottom of the page as it is currently at the top?

Thanks
Title: Re: Vertex
Post by: ViewFromTheBoundary on March 31, 2013, 05:59:31 PM
And another question  ;)

How would i go about hiding the "child boards" i have been searching for the code but I can seem to find it
Title: Re: Vertex
Post by: MLM on March 31, 2013, 11:07:36 PM
wow brony theme......

How would i go about hiding the "child boards" i have been searching for the code but I can seem to find it

Hey Domestic!

In BoardIndex.template.php find:
Code: [Select]
if (!empty($board['children']))
and comment out that whole if statement /* ... */

Please visit VisualPulse.net (http://visualpulse.net/) for future support!
Title: Re: Vertex
Post by: ViewFromTheBoundary on April 01, 2013, 06:43:33 AM
Hi MLM

Thanks for the response, but that didnt seem to work, child board is still on the forum even with that, not sure if I have done it right or not

Title: Re: Vertex
Post by: kat on April 01, 2013, 06:45:10 AM
how would you get the shoutbox to the bottom of the page as it is currently at the top?

Not a clue, I'm afraid. Not a mod I've ever used. Are there any instructions, on the mod's page/support topic?
Title: Re: Vertex
Post by: ViewFromTheBoundary on April 01, 2013, 04:53:29 PM
Hi MLM,

I am still struggling to remove the child boards from the home page

(http://i1356.photobucket.com/albums/q731/Ready_23/Screenshot_zps55572ab6.png)

Here is a screenshot, all I would like is the child board section to disappear so just to leave the forum names

Is this possible

Alex
Title: Re: Vertex
Post by: TheListener on April 01, 2013, 04:55:52 PM
What do you mean by remove from the homepage?
Title: Re: Vertex
Post by: MLM on April 01, 2013, 05:21:29 PM
Hi MLM,

I am still struggling to remove the child boards from the home page

Is this possible

Alex

Already answered your question here (http://www.simplemachines.org/community/index.php?topic=442036.msg3517533#msg3517533); make sure you are editing the file for that theme. Go to VisualPulse.net (http://visualpulse.net/) for future support.
Title: Re: Vertex
Post by: TheListener on April 01, 2013, 05:44:52 PM
Quote
Already answered your question here

Oops apologies MLM I didn't see that reply to the poster.
Title: Re: Vertex
Post by: CheeseHead05 on May 31, 2013, 11:54:38 PM
Im using this theme currently, but cant get my auto award mod to show in the post..even after I relocated to this theme's image/post folder...I need help as I continuosly get frustrated!!!!
Title: Re: Vertex
Post by: drfun on September 02, 2013, 01:38:51 PM
Hello
please i need a little help with the theme, i noticed that the theme doesn't contract to small screen size, it get the portal badge items scattered . though i am using ADK portal system with theme. Here is a screen shot of my forum on a small screen PC or laptop even on mobile phones. Though it is ok with large screen and works fine.

How can i make this, adjust to any kind of screen.
Title: Re: Vertex
Post by: matthewkuhl on November 10, 2013, 01:06:36 PM
Mate, i like this theme so much i registered to say "nice job!"
Clean work, mate  ;)
Title: Re: Vertex
Post by: MLM on November 10, 2013, 01:29:00 PM
Mate, i like this theme so much i registered to say "nice job!"
Clean work, mate  ;)

Thanks, I am really glad you love it! Feel free to share some love on Visual Pulse as well: http://visualpulse.net/forums/index.php?topic=132.0
Title: Re: Vertex
Post by: GPowerE36 on February 08, 2015, 06:01:17 AM
Hi, I have a little problem with the topic , namely that stood in topbutonite with daw down and folds ? When he stood on the bookmark button does not unfold ? Please help .
(http://s17.postimg.org/ec1t6pvpr/image.png)
Title: Re: Vertex
Post by: MLM on February 08, 2015, 12:26:40 PM
Stood in topbutonite with daw down and folds ? When he stood on the bookmark button does not unfold ? Please help .

It is very unclear what you are asking but it vageuly sounds like you want the sub-menu to unfold when you hover instead of click. There is a solution here if that is the case: http://visualpulse.net/forums/index.php?topic=311
Title: Re: Vertex
Post by: GPowerE36 on February 10, 2015, 01:17:42 AM
Hello, I tried it, but it works for me. Swapped code and delete the cache of the subject, but stood with the mouse on the main tab it does not unfold? Please help.
Title: Re: Vertex
Post by: GPowerE36 on February 10, 2015, 04:20:46 AM
Hello, I tried it, but it works for me. Swapped code and delete the cache of the subject, but stood with the mouse on the main tab it does not unfold? Please help.

P.P. - Could also make Subforums look at this as kind of shots that apply and not be one after another ? I apologize for the quote but I can not post Edith

(http://s3.postimg.org/m2eohev1f/image.png)
Title: Re: Vertex
Post by: MLM on February 10, 2015, 11:02:04 AM
...

Create a thread in the general help section (http://www.simplemachines.org/community/index.php?board=60.0).
Title: Re: Vertex
Post by: GPowerE36 on February 13, 2015, 03:20:57 AM
@MLM, would you help on this issue? I tried what I suggested in my post 112 , but without result .
I tried it, but it not works for me. Swapped code and delete the cache of the subject, but stood with the mouse on the main tab it does not unfold? Please help. SMF 2.0.9
Title: Re: Vertex
Post by: Floki on February 27, 2015, 04:18:42 PM
Any help?....

(http://i.gyazo.com/f27f8e5ea9c44ee86f2b186b8ba46403.png)
Title: Re: Vertex
Post by: Mortissimov on February 27, 2015, 04:50:28 PM
Jou need to change

Code: [Select]
.header_main
and

Code: [Select]
.banner_logo
selectors height value in your themes index.css file. If the background of .header_main div bothers you, than change the background too, to some color or use the default.
Title: Re: Vertex
Post by: Floki on February 28, 2015, 11:00:36 AM
Jou need to change

Code: [Select]
.header_main
and

Code: [Select]
.banner_logo
selectors height value in your themes index.css file. If the background of .header_main div bothers you, than change the background too, to some color or use the default.

Is there any specific sizes I can use to make it look good, also can I center the logo?
Title: Re: Vertex
Post by: Floki on February 28, 2015, 11:17:25 AM
Jou need to change

Code: [Select]
.header_main
and

Code: [Select]
.banner_logo
selectors height value in your themes index.css file. If the background of .header_main div bothers you, than change the background too, to some color or use the default.

Is there any specific sizes I can use to make it look good, also can I center the logo?

Also, how do I make this highlighted area white too? What i that section called?

(http://i.imgur.com/rzsJejx.png)
Title: Re: Vertex
Post by: Mortissimov on February 28, 2015, 11:47:02 AM
background of .header_main
Title: Re: Vertex
Post by: Floki on February 28, 2015, 11:55:23 AM
background of .header_main

all it shows when I find the background of .header_main is this...

Code: [Select]
.header_main
{
width: 100%;
height: 210px;
background: #FFFFFF url(../images/vertex_image/main_bg.png);
background-repeat: repeat-x;
Title: Re: Vertex
Post by: MLM on February 28, 2015, 12:03:37 PM
...

Add the following:

Code: [Select]
.banner_logo img
{
    max-height: 100%;
}
Title: Re: Vertex
Post by: Floki on February 28, 2015, 01:25:41 PM
...

Add the following:

Code: [Select]
.banner_logo img
{
    max-height: 100%;
}

Okay, all good now. Thank you, one last query, The white section, what was the original colour of that?
Title: Re: Vertex
Post by: Floki on February 28, 2015, 01:34:43 PM
...

Add the following:

Code: [Select]
.banner_logo img
{
    max-height: 100%;
}

Okay, all good now. Thank you, one last query, The white section, what was the original colour of that?

Never mind its sorted but Last question, then you wont see me again.

(http://i.gyazo.com/fa30163fe6d7f528566646b9ab3c81a3.png)

The pane with my logo and search box on, how to I edit that colour, it isnt the one listed as '.header_main'.
Title: Re: Vertex
Post by: Empire KickAss on July 20, 2015, 05:43:31 AM
I really like the IPB forum look, so that's why I'm posted here as Vertex is like that.

I'm looking for an new theme and since I like Vertex I'm thinking to have two themes in one. Can the Vertex theme and MaterialForms merge together. For example. The background from Material says the same (apart from the sea image) and the Forum itself as Vertex. I like the look of MaterialForms, But wanted to have an IB.Broad look as well. 

Here is what MaterialForms looks like http://demo.studiocrimes.com/index.php?variant=green;theme=29 and I do what it to be blue. So really I like the full background, Heading and footer from MaterialForms and the rest and even the Button links from vertex.

PS: due to copyrights reasons, is it accepted? or approved to go ahead?

More here http://studiocrimes.com/index.php?topic=113.0
Title: Re: Vertex
Post by: MLM on July 20, 2015, 08:27:19 AM
go ahead?

There are no restrictions on customizing the theme.
Title: Re: Vertex
Post by: Empire KickAss on July 20, 2015, 08:56:41 AM
go ahead?

There are no restrictions on customizing the theme.
thanks. I'll let you know if I need your help.

And would this idea will work and any suggestions to add
Title: Re: Vertex
Post by: SaeedSKH on July 22, 2015, 08:59:31 AM
hi
i put this theme on my forum ,
but i don't know how can i change Vertex logo to my own logo ,
and another question is , my logo should be in which size ?
how can i create a logo ?
please help me guys :)
Title: Re: Vertex
Post by: nofapturkiye on May 15, 2016, 10:33:16 PM
hi
i put this theme on my forum ,
but i don't know how can i change Vertex logo to my own logo ,
and another question is , my logo should be in which size ?
how can i create a logo ?
please help me guys :)

same here, cant able to add logo image..... any help?