Simple Machines Community Forum

SMF Support => SMF 2.1.x Support => Topic started by: Jeremy M. on August 18, 2015, 09:09:56 PM

Title: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 18, 2015, 09:09:56 PM
Can we upgrade to 2.1 without wiping out everything and resetting the entire forum?
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: JBlaze on August 18, 2015, 09:12:26 PM
You can, yes. But it is highly discouraged to run 2.1 on a production site unless you really know what you're doing.
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 18, 2015, 09:25:27 PM
Quote from: zilladotexe on August 18, 2015, 09:12:26 PM
You can, yes. But it is highly discouraged to run 2.1 on a production site unless you [t]really[/i] know what you're doing.

All i can do is make a backup of my site and try :)   I'm willing to take the risk if someone would point me into the right direction :)
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Kindred on August 18, 2015, 09:43:07 PM
Sorry, but if you have to ask that question, then you are definitely NOT the correct audience to use a beta version.....   I recommend that you stick with 2.0.x until 2.1 is at least RC
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 18, 2015, 10:08:22 PM
Quote from: Kindred on August 18, 2015, 09:43:07 PM
Sorry, but if you have to ask that question, then you are definitely NOT the correct audience to use a beta version.....   I recommend that you stick with 2.0.x until 2.1 is at least RC

That's what BACK UPS are for! 
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Ronald_1938 on August 18, 2015, 10:52:38 PM
Quote from: StormChaser83 on August 18, 2015, 10:08:22 PM
Quote from: Kindred on August 18, 2015, 09:43:07 PM
Sorry, but if you have to ask that question, then you are definitely NOT the correct audience to use a beta version.....   I recommend that you stick with 2.0.x until 2.1 is at least RC

That's what BACK UPS are for!

I upgraded one, turned out OK, some mod.'s don't work..
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 19, 2015, 03:51:17 AM
Upgrade Successful!  I did it on my own!!!!!!!!!!!  Lost mods and my themes, but that's ok. . I backed them up!
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Kindred on August 19, 2015, 06:12:24 AM
upgrades between versions will always lose mods and themes.... and 2.0 themes will not work with 2.1 -- and most mods will not either.
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 19, 2015, 08:01:40 AM
Quote from: Kindred on August 19, 2015, 06:12:24 AM
upgrades between versions will always lose mods and themes.... and 2.0 themes will not work with 2.1 -- and most mods will not either.

Heck, I can deal with that :)  It was time for a new theme anyway :)
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Ronald_1938 on August 19, 2015, 08:02:59 AM
Kindred and the others are correct, your best to wait until the final release..

I did the upgrade on the non active board.. Nothing works, but you can get some of the mod's to function..

I like it a lot, am waiting for the release, but loads of works yet..hopefully it'll be out soon..
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 19, 2015, 08:06:57 AM
Quote from: Oldcrow on August 19, 2015, 08:02:59 AM
Kindred and the others are correct, your best to wait until the final release..

I did the upgrade on the non active board.. Nothing works, but you can get some of the mod's to function..

I like it a lot, am waiting for the release, but loads of works yet..hopefully it'll be out soon..


Yeah and i notice there aren't any themes out for it either. . It looks good. . I'm going back to 2.0.10 though :) 
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 19, 2015, 09:05:06 AM
Quote from: StormChaser83 on August 19, 2015, 08:06:57 AM
Quote from: Oldcrow on August 19, 2015, 08:02:59 AM
Kindred and the others are correct, your best to wait until the final release..

I did the upgrade on the non active board.. Nothing works, but you can get some of the mod's to function..

I like it a lot, am waiting for the release, but loads of works yet..hopefully it'll be out soon..


Yeah and i notice there aren't any themes out for it either. . It looks good. . I'm going back to 2.0.10 though :)


Well, i screwed it up. . lol. . . I can't get it to go back to 2.0.10
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Ronald_1938 on August 19, 2015, 11:34:36 AM
Thats what happens when you don't listen to these guys.. They do warn you not to use it on a active board..
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Sir Osis of Liver on August 19, 2015, 01:18:39 PM
Quote from: StormChaser83 on August 19, 2015, 09:05:06 AM
Well, i screwed it up. . lol. . . I can't get it to go back to 2.0.10

Your database has been converted to 2.1, and cannot be used with a 2.0.10 install.  You did do a backup before upgrading ......... didn't you?
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: JBlaze on August 19, 2015, 02:14:29 PM
Once you convert to 2.1, there's no rolling it back to 2.0. Unless you made a database backup that you can restore, you are stuck with using 2.1.

There were many warnings informing you of this before you downloaded AND before upgrading.
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 19, 2015, 02:47:19 PM
Quote from: Krash on August 19, 2015, 01:18:39 PM
Quote from: StormChaser83 on August 19, 2015, 09:05:06 AM
Well, i screwed it up. . lol. . . I can't get it to go back to 2.0.10

Your database has been converted to 2.1, and cannot be used with a 2.0.10 install.  You did do a backup before upgrading ......... didn't you?

Yep, i made a FULL Backup using my cPanel.
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Kindred on August 19, 2015, 03:04:38 PM
so, you are going to have to RESTORE your backup... both files AND database  (they are two separate things)
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 19, 2015, 03:06:04 PM
Quote from: Kindred on August 19, 2015, 03:04:38 PM
so, you are going to have to RESTORE your backup... both files AND database  (they are two separate things)

I'll have to have my hosting support do that for me, because I don't know how.
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Kindred on August 19, 2015, 03:06:51 PM
highlighting yet again, the reason we told you not to do it...
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 19, 2015, 03:10:51 PM
Quote from: Kindred on August 19, 2015, 03:06:51 PM
highlighting yet again, the reason we told you not to do it...

This is how we learn, and i was smart enough to create a full backup........As of right now, i did successfully upload the database. Currently uploading the FTP files now.
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Kindred on August 19, 2015, 03:12:17 PM
except learning should be done on a TEST site, not on a live site....
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 19, 2015, 03:15:31 PM
Quote from: Kindred on August 19, 2015, 03:12:17 PM
except learning should be done on a TEST site, not on a live site....

my forum wasn't really active anyway, so to me, it's no loss if for some reason I can't get it to work again. Plus, i'm very OCD about having multiple useless accounts. I had 3 email address, and I took 3 days to decide on which one I wanted to delete. Down to 2 now. I don't even want 2, but i have no choice
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 19, 2015, 03:48:18 PM
I effed up. I admit it. 


Connection Problems

Sorry, SMF was unable to connect to the database. This may be caused by the server being busy. Please try again later.
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: JBlaze on August 19, 2015, 04:01:45 PM
You probably overwrote your Settings.php with a fresh one. Use repair_settings.php to fix it.
Title: Re: Upgrade from 2.0.10 to 2.1
Post by: Jeremy M. on August 19, 2015, 04:12:12 PM
Quote from: zilladotexe on August 19, 2015, 04:01:45 PM
You probably overwrote your Settings.php with a fresh one. Use repair_settings.php to fix it.


Didn't work.......Oh well. No big deal for me.