Simple Machines Community Forum

SMF Development => Bug Reports => Fixed or Bogus Bugs => Topic started by: Panoulis64 on April 08, 2021, 10:24:30 AM

Title: problem save settings
Post by: Panoulis64 on April 08, 2021, 10:24:30 AM
When i go to save, while everything is done properly, it does not work.
I will have to do the same action several times to save.
What's wrong;
I do not know if it is relevant, but when I log in, sometimes I do the same action twice.

Sorry if my English is not completely correct.
Title: Re: problem save settings
Post by: Aleksi "Lex" Kilpinen on April 08, 2021, 10:37:59 AM
Sounds like a bad server side cache. You should probably ask your host if they are running some cache, and if they could adjust it or disable it.
Title: Re: problem save settings
Post by: shawnb61 on April 08, 2021, 11:19:32 AM
We have also seen this when there are http vs https conflicts.

In repair_settings.php, if you are running https, make sure all your settings are https.  (Or http if running http...)
Title: Re: problem save settings
Post by: m4z on April 09, 2021, 03:39:41 AM
Which version of SMF are you using?
Title: Re: problem save settings
Post by: Panoulis64 on April 09, 2021, 05:38:07 AM
The last on.
Smf 2.0.18
Title: Re: problem save settings
Post by: Panoulis64 on April 09, 2021, 11:17:46 AM
Aleksi "Lex" Kilpinen & shawnb61
Saturday or Sunday, I will see with the web master, that you wrote to me and I will answer you.
Thanks.
Title: Re: problem save settings
Post by: Aleksi "Lex" Kilpinen on April 09, 2021, 11:24:29 AM
Sure, we'll be here :)
Title: Re: problem save settings
Post by: Panoulis64 on April 12, 2021, 09:57:48 AM
The problem was fixed, it was probably created by package conflicts.
There seems to be a more general problem.
The web master suggested me let him do it a clean new installation smf, and to put the packages one by one, to see if they conflict and then to enter the content of the forum.
Thanks.
Title: Re: problem save settings
Post by: Aleksi "Lex" Kilpinen on April 12, 2021, 10:10:40 AM
Sounds unlikely, but still good if your problem is gone.
Title: Re: problem save settings
Post by: Panoulis64 on April 12, 2021, 10:37:24 AM
We saw what you suggested, they had no problem.
we also changed the pip but nothing.
We dealt with the packages and the conflict they have and when we came back to see what to do with the storage issue, it was resolved.