Advertisement:

Author Topic: Togliere loghi  (Read 3465 times)

Offline pierpis

  • Jr. Member
  • **
  • Posts: 338
Togliere loghi
« on: January 13, 2013, 01:01:15 PM »
Vorrei togliere i loghi dalla prima maschera di accesso (quella del login) renderla pulita con solo schema per passwor e nikname... si può fare? e dove si agisce?

Offline emanuele

  • SMF Super Hero
  • *******
  • Posts: 14,156
  • Gender: Male
  • THERE'S JUST ME
Re: Togliere loghi
« Reply #1 on: January 13, 2013, 02:14:30 PM »
Intendi la parte alta del template? (l'header, il menù, ecc.)
Non credo ci sia un modo semplice...
Quello più veloce che mi viene in mente è rimpiazzare tutto con una chiamata a SSI e creare l'intera pagina come vuoi tu...


Take a peek at what I'm doing! ;D



Hai bisogno di supporto in Italiano?

Aiutateci ad aiutarvi: spiegate bene il vostro problema: no, "non funziona" non è una spiegazione!!
1) Cosa fai,
2) cosa ti aspetti,
3) cosa ottieni.

Offline pierpis

  • Jr. Member
  • **
  • Posts: 338
Re: Togliere loghi
« Reply #2 on: January 13, 2013, 05:15:13 PM »
Intendevo in questa pagina iniziale del login

Offline emanuele

  • SMF Super Hero
  • *******
  • Posts: 14,156
  • Gender: Male
  • THERE'S JUST ME
Re: Togliere loghi
« Reply #3 on: January 13, 2013, 05:31:04 PM »
mmm...
Ripensandoci, ci sarebbe un'alternativa (anche se non so valutarne le 2conseguenze").
In LogInOut.php, trova:
Code: [Select]
else
{
loadLanguage('Login');
loadTemplate('Login');
$context['sub_template'] = 'login';
}
e rimpiazzalo con:
Code: [Select]
else
{
loadLanguage('Login');
loadTemplate('Login');
$context['sub_template'] = 'login';
$tmp = $context['template_layers'];
$context['template_layers']= array();
foreach ($tmp as $key => $val)
if ($val != 'body')
$context['template_layers'][] = $val;
else
$context['template_layers'][] = 'body_login';
}
Apri index.template.php e cerca le due funzioni template_body_above e template_body_below e copiale in Login.template.php.
Una volta copiate, rinominale in template_body_login_above e template_body_login_below.
A quel punto puoi farci quello che vuoi. ;)


Take a peek at what I'm doing! ;D



Hai bisogno di supporto in Italiano?

Aiutateci ad aiutarvi: spiegate bene il vostro problema: no, "non funziona" non è una spiegazione!!
1) Cosa fai,
2) cosa ti aspetti,
3) cosa ottieni.

Offline pierpis

  • Jr. Member
  • **
  • Posts: 338
Re: Togliere loghi
« Reply #4 on: January 14, 2013, 11:59:58 AM »
Ho fatto il primo passaggio, cioè la sostituzione delle stringhe che mi hai consigliato.... e questo non ha cambiato nulla... poi sono andato a copiare i template_body_above e template_body_below in  Login.template.php.... e provo l'accesso al forum, mi appare la scritta di errore .... mi ero dimenticato di rinominarli, lo faccio come mi hai detto e ho l'accesso al forum.
Ora il "puoi farci quello che vuoi" mi sembra un dilemma.... come? da dove? .... l'aspetto iniziale è come in originale.... ma ora dopo le modifiche, da dove lo cambio?

Code: [Select]
function template_body_login_above()
{
global $context, $settings, $options, $scripturl, $txt, $modSettings;

echo !empty($settings['forum_width']) ? '
<div id="wrapper" style="width: ' . $settings['forum_width'] . '">' : '', '
<div id="header"><div class="frame">
<div id="top_section">
<h1 class="forumtitle">
<a href="', $scripturl, '">', empty($context['header_logo_url_html_safe']) ? $context['forum_name'] : '<img src="' . $context['header_logo_url_html_safe'] . '" alt="' . $context['forum_name'] . '" />', '</a>
</h1>';

// the upshrink image, right-floated
echo '
<img id="upshrink" src="', $settings['images_url'], '/upshrink.png" alt="*" title="', $txt['upshrink_description'], '" style="display: none;" />';
echo '
', empty($settings['site_slogan']) ?'<img id="smflogo" src="'  . $settings['images_url'] . '/smflogo.png" alt="Simple Machines Forum" title="Simple Machines Forum" />' : '<div id="siteslogan" class="floatright">' . $settings['site_slogan'] . '</div>', '
</div>
<div id="upper_section" class="middletext"', empty($options['collapse_header']) ? '' : ' style="display: none;"', '>
<div class="user">';

// If the user is logged in, display stuff like their name, new messages, etc.
if ($context['user']['is_logged'])
{
if (!empty($context['user']['avatar']))
echo '
<p class="avatar">', $context['user']['avatar']['image'], '</p>';
echo '
<ul class="reset">
<li class="greeting">', $txt['hello_member_ndt'], ' <span>', $context['user']['name'], '</span></li>
<li><a href="', $scripturl, '?action=unread">', $txt['unread_since_visit'], '</a></li>
<li><a href="', $scripturl, '?action=unreadreplies">', $txt['show_unread_replies'], '</a></li>';

// Is the forum in maintenance mode?
if ($context['in_maintenance'] && allowedTo('admin_maintmode'))
echo '
<li class="notice">', $txt['maintain_mode_on'], '</li>';

// Are there any members waiting for approval?
if (!empty($context['unapproved_members']))
echo '
<li>', $context['unapproved_members'] == 1 ? $txt['approve_thereis'] : $txt['approve_thereare'], ' <a href="', $scripturl, '?action=admin;area=viewmembers;sa=browse;type=approve">', $context['unapproved_members'] == 1 ? $txt['approve_member'] : $context['unapproved_members'] . ' ' . $txt['approve_members'], '</a> ', $txt['approve_members_waiting'], '</li>';

if (!empty($context['open_mod_reports']) && $context['show_open_reports'])
echo '
<li><a href="', $scripturl, '?action=moderate;area=reports">', sprintf($txt['mod_reports_waiting'], $context['open_mod_reports']), '</a></li>';

echo '
<li>', $context['current_time'], '</li>
</ul>';
}
// Otherwise they're a guest - this time ask them to either register or login - lazy bums...
elseif (!empty($context['show_login_bar']))
{
echo '
<script type="text/javascript" src="', $settings['default_theme_url'], '/scripts/sha1.js"></script>
<form id="guest_form" action="', $scripturl, '?action=login2" method="post" accept-charset="', $context['character_set'], '" ', empty($context['disable_login_hashing']) ? ' onsubmit="hashLoginPassword(this, \'' . $context['session_id'] . '\');"' : '', '>
<div class="info">', sprintf($txt['welcome_guest'], $txt['guest_title']), '</div>
<input type="text" name="user" size="10" class="input_text" />
<input type="password" name="passwrd" size="10" class="input_password" />
<select name="cookielength">
<option value="60">', $txt['one_hour'], '</option>
<option value="1440">', $txt['one_day'], '</option>
<option value="10080">', $txt['one_week'], '</option>
<option value="43200">', $txt['one_month'], '</option>
<option value="-1" selected="selected">', $txt['forever'], '</option>
</select>
<input type="submit" value="', $txt['login'], '" class="button_submit" /><br />
<div class="info">', $txt['quick_login_dec'], '</div>';

if (!empty($modSettings['enableOpenID']))
echo '
<br /><input type="text" name="openid_identifier" id="openid_url" size="25" class="input_text openid_login" />';

echo '
<input type="hidden" name="hash_passwrd" value="" />
</form>';
}

echo '
</div>
<div class="news normaltext">
<form id="search_form" action="', $scripturl, '?action=search2" method="post" accept-charset="', $context['character_set'], '">
<input type="text" name="search" value="" class="input_text" />&nbsp;
<input type="submit" name="submit" value="', $txt['search'], '" class="button_submit" />
<input type="hidden" name="advanced" value="0" />';

// Search within current topic?
if (!empty($context['current_topic']))
echo '
<input type="hidden" name="topic" value="', $context['current_topic'], '" />';
// If we're on a certain board, limit it to this board ;).
elseif (!empty($context['current_board']))
echo '
<input type="hidden" name="brd[', $context['current_board'], ']" value="', $context['current_board'], '" />';

echo '</form>';

// Show a random news item? (or you could pick one from news_lines...)
if (!empty($settings['enable_news']))
echo '
<h2>', $txt['news'], ': </h2>
<p>', $context['random_news_line'], '</p>';

echo '
</div>
</div>
<br class="clear" />';

// Define the upper_section toggle in JavaScript.
echo '
<script type="text/javascript"><!-- // --><![CDATA[
var oMainHeaderToggle = new smc_Toggle({
bToggleEnabled: true,
bCurrentlyCollapsed: ', empty($options['collapse_header']) ? 'false' : 'true', ',
aSwappableContainers: [
\'upper_section\'
],
aSwapImages: [
{
sId: \'upshrink\',
srcExpanded: smf_images_url + \'/upshrink.png\',
altExpanded: ', JavaScriptEscape($txt['upshrink_description']), ',
srcCollapsed: smf_images_url + \'/upshrink2.png\',
altCollapsed: ', JavaScriptEscape($txt['upshrink_description']), '
}
],
oThemeOptions: {
bUseThemeSettings: ', $context['user']['is_guest'] ? 'false' : 'true', ',
sOptionName: \'collapse_header\',
sSessionVar: ', JavaScriptEscape($context['session_var']), ',
sSessionId: ', JavaScriptEscape($context['session_id']), '
},
oCookieOptions: {
bUseCookie: ', $context['user']['is_guest'] ? 'true' : 'false', ',
sCookieName: \'upshrink\'
}
});
// ]]></script>';

// Show the menu here, according to the menu sub template.
template_menu();
if (!empty($modSettings['ib_text']) && !empty($modSettings['ib_enable']))
{
echo'<br /><br /><div class="redondeado">
<p align="center"> ',$modSettings['ib_text'],'
</p>
</div> ';
}

echo '
<br class="clear" />
</div></div>';

// The main content should go here.
echo '
<div id="content_section"><div class="frame">
<div id="main_content_section">';

// Custom banners and shoutboxes should be placed here, before the linktree.

// Show the navigation tree.
theme_linktree();
}

function template_body_login_below()
{
global $context, $settings, $options, $scripturl, $txt, $modSettings;

echo '
</div>
</div></div>';

// Show the "Powered by" and "Valid" logos, as well as the copyright. Remember, the copyright must be somewhere!
echo '
<div id="footer_section"><div class="frame">
<ul class="reset">
<li class="copyright">', !empty($settings['custom_copyright']) ? '<span class="smalltext">'. parse_bbc($settings['custom_copyright']). '</span>' : '', '<br />
', theme_copyright(), '
</li>
<li><a id="button_xhtml" href="http://validator.w3.org/check?uri=referer" target="_blank" class="new_win" title="', $txt['valid_xhtml'], '"><span>', $txt['xhtml'], '</span></a></li>
', !empty($modSettings['xmlnews_enable']) && (!empty($modSettings['allow_guestAccess']) || $context['user']['is_logged']) ? '<li><a id="button_rss" href="' . $scripturl . '?action=.xml;type=rss" class="new_win"><span>' . $txt['rss'] . '</span></a></li>' : '', '
<li class="last"><a id="button_wap2" href="', $scripturl , '?wap2" class="new_win"><span>', $txt['wap2'], '</span></a></li>
</ul>';

// Show the load time?
if ($context['show_load_time'])
echo '
<p>', $txt['page_created'], $context['load_time'], $txt['seconds_with'], $context['load_queries'], $txt['queries'], '</p>';

echo '
</div></div>', !empty($settings['forum_width']) ? '
</div>' : '';
}


Ovviamente tutto questo l'ho inserito prima del "?" finale
« Last Edit: January 14, 2013, 12:22:15 PM by pierpis »

Offline emanuele

  • SMF Super Hero
  • *******
  • Posts: 14,156
  • Gender: Male
  • THERE'S JUST ME
Re: Togliere loghi
« Reply #5 on: January 14, 2013, 12:33:19 PM »
Non lo so, prova con:
Code: [Select]
function template_body_login_above()
{
global $context, $settings, $options, $scripturl, $txt, $modSettings;

echo !empty($settings['forum_width']) ? '
<div id="wrapper" style="width: ' . $settings['forum_width'] . '">' : '', '
<div id="header"><div class="frame">
<div id="upper_section" class="middletext"', empty($options['collapse_header']) ? '' : ' style="display: none;"', '>
<div class="user">';

// If the user is logged in, display stuff like their name, new messages, etc.
if ($context['user']['is_logged'])
{
if (!empty($context['user']['avatar']))
echo '
<p class="avatar">', $context['user']['avatar']['image'], '</p>';
echo '
<ul class="reset">
<li class="greeting">', $txt['hello_member_ndt'], ' <span>', $context['user']['name'], '</span></li>
<li><a href="', $scripturl, '?action=unread">', $txt['unread_since_visit'], '</a></li>
<li><a href="', $scripturl, '?action=unreadreplies">', $txt['show_unread_replies'], '</a></li>';

// Is the forum in maintenance mode?
if ($context['in_maintenance'] && allowedTo('admin_maintmode'))
echo '
<li class="notice">', $txt['maintain_mode_on'], '</li>';

// Are there any members waiting for approval?
if (!empty($context['unapproved_members']))
echo '
<li>', $context['unapproved_members'] == 1 ? $txt['approve_thereis'] : $txt['approve_thereare'], ' <a href="', $scripturl, '?action=admin;area=viewmembers;sa=browse;type=approve">', $context['unapproved_members'] == 1 ? $txt['approve_member'] : $context['unapproved_members'] . ' ' . $txt['approve_members'], '</a> ', $txt['approve_members_waiting'], '</li>';

if (!empty($context['open_mod_reports']) && $context['show_open_reports'])
echo '
<li><a href="', $scripturl, '?action=moderate;area=reports">', sprintf($txt['mod_reports_waiting'], $context['open_mod_reports']), '</a></li>';

echo '
<li>', $context['current_time'], '</li>
</ul>';
}
// Otherwise they're a guest - this time ask them to either register or login - lazy bums...
elseif (!empty($context['show_login_bar']))
{
echo '
<script type="text/javascript" src="', $settings['default_theme_url'], '/scripts/sha1.js"></script>
<form id="guest_form" action="', $scripturl, '?action=login2" method="post" accept-charset="', $context['character_set'], '" ', empty($context['disable_login_hashing']) ? ' onsubmit="hashLoginPassword(this, \'' . $context['session_id'] . '\');"' : '', '>
<div class="info">', sprintf($txt['welcome_guest'], $txt['guest_title']), '</div>
<input type="text" name="user" size="10" class="input_text" />
<input type="password" name="passwrd" size="10" class="input_password" />
<select name="cookielength">
<option value="60">', $txt['one_hour'], '</option>
<option value="1440">', $txt['one_day'], '</option>
<option value="10080">', $txt['one_week'], '</option>
<option value="43200">', $txt['one_month'], '</option>
<option value="-1" selected="selected">', $txt['forever'], '</option>
</select>
<input type="submit" value="', $txt['login'], '" class="button_submit" /><br />
<div class="info">', $txt['quick_login_dec'], '</div>';

if (!empty($modSettings['enableOpenID']))
echo '
<br /><input type="text" name="openid_identifier" id="openid_url" size="25" class="input_text openid_login" />';

echo '
<input type="hidden" name="hash_passwrd" value="" />
</form>';
}

echo '
</div>
<div class="news normaltext">
<form id="search_form" action="', $scripturl, '?action=search2" method="post" accept-charset="', $context['character_set'], '">
<input type="text" name="search" value="" class="input_text" />&nbsp;
<input type="submit" name="submit" value="', $txt['search'], '" class="button_submit" />
<input type="hidden" name="advanced" value="0" />';

// Search within current topic?
if (!empty($context['current_topic']))
echo '
<input type="hidden" name="topic" value="', $context['current_topic'], '" />';
// If we're on a certain board, limit it to this board ;).
elseif (!empty($context['current_board']))
echo '
<input type="hidden" name="brd[', $context['current_board'], ']" value="', $context['current_board'], '" />';

echo '</form>';

// Show a random news item? (or you could pick one from news_lines...)
if (!empty($settings['enable_news']))
echo '
<h2>', $txt['news'], ': </h2>
<p>', $context['random_news_line'], '</p>';

echo '
</div>
</div>
<br class="clear" />';

// Define the upper_section toggle in JavaScript.
echo '
<script type="text/javascript"><!-- // --><![CDATA[
var oMainHeaderToggle = new smc_Toggle({
bToggleEnabled: true,
bCurrentlyCollapsed: ', empty($options['collapse_header']) ? 'false' : 'true', ',
aSwappableContainers: [
\'upper_section\'
],
aSwapImages: [
{
sId: \'upshrink\',
srcExpanded: smf_images_url + \'/upshrink.png\',
altExpanded: ', JavaScriptEscape($txt['upshrink_description']), ',
srcCollapsed: smf_images_url + \'/upshrink2.png\',
altCollapsed: ', JavaScriptEscape($txt['upshrink_description']), '
}
],
oThemeOptions: {
bUseThemeSettings: ', $context['user']['is_guest'] ? 'false' : 'true', ',
sOptionName: \'collapse_header\',
sSessionVar: ', JavaScriptEscape($context['session_var']), ',
sSessionId: ', JavaScriptEscape($context['session_id']), '
},
oCookieOptions: {
bUseCookie: ', $context['user']['is_guest'] ? 'true' : 'false', ',
sCookieName: \'upshrink\'
}
});
// ]]></script>';

// Show the menu here, according to the menu sub template.
template_menu();
if (!empty($modSettings['ib_text']) && !empty($modSettings['ib_enable']))
{
echo'<br /><br /><div class="redondeado">
<p align="center"> ',$modSettings['ib_text'],'
</p>
</div> ';
}

echo '
<br class="clear" />
</div></div>';

// The main content should go here.
echo '
<div id="content_section"><div class="frame">
<div id="main_content_section">';

// Custom banners and shoutboxes should be placed here, before the linktree.

// Show the navigation tree.
theme_linktree();
}

function template_body_login_below()
{
global $context, $settings, $options, $scripturl, $txt, $modSettings;

echo '
</div>
</div></div>';

// Show the "Powered by" and "Valid" logos, as well as the copyright. Remember, the copyright must be somewhere!
echo '
<div id="footer_section"><div class="frame">
<ul class="reset">
<li class="copyright">', !empty($settings['custom_copyright']) ? '<span class="smalltext">'. parse_bbc($settings['custom_copyright']). '</span>' : '', '<br />
', theme_copyright(), '
</li>
<li><a id="button_xhtml" href="http://validator.w3.org/check?uri=referer" target="_blank" class="new_win" title="', $txt['valid_xhtml'], '"><span>', $txt['xhtml'], '</span></a></li>
', !empty($modSettings['xmlnews_enable']) && (!empty($modSettings['allow_guestAccess']) || $context['user']['is_logged']) ? '<li><a id="button_rss" href="' . $scripturl . '?action=.xml;type=rss" class="new_win"><span>' . $txt['rss'] . '</span></a></li>' : '', '
<li class="last"><a id="button_wap2" href="', $scripturl , '?wap2" class="new_win"><span>', $txt['wap2'], '</span></a></li>
</ul>';

// Show the load time?
if ($context['show_load_time'])
echo '
<p>', $txt['page_created'], $context['load_time'], $txt['seconds_with'], $context['load_queries'], $txt['queries'], '</p>';

echo '
</div></div>', !empty($settings['forum_width']) ? '
</div>' : '';
}
Se così non bastasse prova a togliere altro.


Take a peek at what I'm doing! ;D



Hai bisogno di supporto in Italiano?

Aiutateci ad aiutarvi: spiegate bene il vostro problema: no, "non funziona" non è una spiegazione!!
1) Cosa fai,
2) cosa ti aspetti,
3) cosa ottieni.

Offline pierpis

  • Jr. Member
  • **
  • Posts: 338
Re: Togliere loghi
« Reply #6 on: January 14, 2013, 02:40:58 PM »
Emanuele, ho iniziato col copiare le tue stringhe modificate (cancellate).... nulla, non è successo nulla..... sembra che il programma non ci vada a leggere  :'(

Offline emanuele

  • SMF Super Hero
  • *******
  • Posts: 14,156
  • Gender: Male
  • THERE'S JUST ME
Re: Togliere loghi
« Reply #7 on: January 16, 2013, 07:56:13 AM »
mmm...Niente di niente? ???

Prova a togliere tutto così sei sicuro che vedi i cambiamenti.

Altra cosa, per debug, nel pezzo dove hai aggiunto:
Code: [Select]
foreach ($tmp as $key => $val)
if ($val != 'body')
$context['template_layers'][] = $val;
else
$context['template_layers'][] = 'body_login';
cambialo in:
Code: [Select]
foreach ($tmp as $key => $val)
if ($val != 'body')
$context['template_layers'][] = $val;
else
$context['template_layers'][] = 'body_login';
print_r($context['template_layers']);
così vedi se ci passa.
Ti dovrebbe apparire una riga all'inizio della pagina, prima di ogni altra cosa (tra l'altro, quando la vedi copiala ed incollala qui).


Take a peek at what I'm doing! ;D



Hai bisogno di supporto in Italiano?

Aiutateci ad aiutarvi: spiegate bene il vostro problema: no, "non funziona" non è una spiegazione!!
1) Cosa fai,
2) cosa ti aspetti,
3) cosa ottieni.

Offline pierpis

  • Jr. Member
  • **
  • Posts: 338
Re: Togliere loghi
« Reply #8 on: January 16, 2013, 10:38:25 AM »
Ho modificato le stringhe che mi hai postato..... non ha cambiato nulla, allora per vedere qualche cambiamento ho provato a cancellare tutto (da Login.template.php) ossia le stringhe con i titoli modificati..... nulla rimane sempre com'era.... secondo me non stà andando a leggere.

Offline pierpis

  • Jr. Member
  • **
  • Posts: 338
Re: Togliere loghi
« Reply #9 on: January 19, 2013, 04:38:39 AM »
 :'( :'(

Offline emanuele

  • SMF Super Hero
  • *******
  • Posts: 14,156
  • Gender: Male
  • THERE'S JUST ME
Re: Togliere loghi
« Reply #10 on: January 19, 2013, 07:32:22 AM »
Allega LogInOut.php.


Take a peek at what I'm doing! ;D



Hai bisogno di supporto in Italiano?

Aiutateci ad aiutarvi: spiegate bene il vostro problema: no, "non funziona" non è una spiegazione!!
1) Cosa fai,
2) cosa ti aspetti,
3) cosa ottieni.

Offline pierpis

  • Jr. Member
  • **
  • Posts: 338
Re: Togliere loghi
« Reply #11 on: January 19, 2013, 09:38:36 AM »
Eccolo qua  :)

Code: [Select]
<?php

/**
 * Simple Machines Forum (SMF)
 *
 * @package SMF
 * @author Simple Machines http://www.simplemachines.org
 * @copyright 2011 Simple Machines
 * @license http://www.simplemachines.org/about/smf/license.php BSD
 *
 * @version 2.0
 */

if (!defined('SMF'))
die('Hacking attempt...');

/* This file is concerned pretty entirely, as you see from its name, with
logging in and out members, and the validation of that.  It contains:

void Login()
- shows a page for the user to type in their username and password.
- caches the referring URL in $_SESSION['login_url'].
- uses the Login template and language file with the login sub
  template.
- if you are using a wireless device, uses the protocol_login sub
  template in the Wireless template.
- accessed from ?action=login.

void Login2()
- actually logs you in and checks that login was successful.
- employs protection against a specific IP or user trying to brute
  force a login to an account.
- on error, uses the same templates Login() uses.
- upgrades password encryption on login, if necessary.
- after successful login, redirects you to $_SESSION['login_url'].
- accessed from ?action=login2, by forms.

void Logout(bool internal = false)
- logs the current user out of their account.
- requires that the session hash is sent as well, to prevent automatic
  logouts by images or javascript.
- doesn't check the session if internal is true.
- redirects back to $_SESSION['logout_url'], if it exists.
- accessed via ?action=logout;session_var=...

string md5_hmac(string data, string key)
- old style SMF 1.0.x/YaBB SE 1.5.x hashing.
- returns the HMAC MD5 of data with key.

string phpBB3_password_check(string passwd, string passwd_hash)
- custom encryption for phpBB3 based passwords.

void validatePasswordFlood(id_member, password_flood_value = false, was_correct = false)
- this function helps protect against brute force attacks on a member's password.
*/

// Ask them for their login information.
function Login()
{
global $txt$context$scripturl;

// In wireless?  If so, use the correct sub template.
if (WIRELESS)
$context['sub_template'] = WIRELESS_PROTOCOL '_login';
// Otherwise, we need to load the Login template/language file.
else
{
loadLanguage('Login');
loadTemplate('Login');
$context['sub_template'] = 'login';
$tmp $context['template_layers'];
$context['template_layers']= array();
foreach ($tmp as $key => $val)
if ($val != 'body')
$context['template_layers'][] = $val;
else
$context['template_layers'][] = 'body_login';
print_r($context['template_layers']);

}


// Get the template ready.... not really much else to do.
$context['page_title'] = $txt['login'];
$context['default_username'] = &$_REQUEST['u'];
$context['default_password'] = '';
$context['never_expire'] = false;

// Add the login chain to the link tree.
$context['linktree'][] = array(
'url' => $scripturl '?action=login',
'name' => $txt['login'],
);

// Set the login URL - will be used when the login process is done (but careful not to send us to an attachment).
if (isset($_SESSION['old_url']) && strpos($_SESSION['old_url'], 'dlattach') === false && preg_match('~(board|topic)[=,]~'$_SESSION['old_url']) != 0)
$_SESSION['login_url'] = $_SESSION['old_url'];
else
unset($_SESSION['login_url']);
}

// Perform the actual logging-in.
function Login2()
{
global $txt$scripturl$user_info$user_settings$smcFunc;
global $cookiename$maintenance$modSettings$context$sc$sourcedir;

// Load cookie authentication stuff.
require_once($sourcedir '/Subs-Auth.php');

if (isset($_GET['sa']) && $_GET['sa'] == 'salt' && !$user_info['is_guest'])
{
if (isset($_COOKIE[$cookiename]) && preg_match('~^a:[34]:\{i:0;(i:\d{1,6}|s:[1-8]:"\d{1,8}");i:1;s:(0|40):"([a-fA-F0-9]{40})?";i:2;[id]:\d{1,14};(i:3;i:\d;)?\}$~'$_COOKIE[$cookiename]) === 1)
list (, , $timeout) = @unserialize($_COOKIE[$cookiename]);
elseif (isset($_SESSION['login_' $cookiename]))
list (, , $timeout) = @unserialize($_SESSION['login_' $cookiename]);
else
trigger_error('Login2(): Cannot be logged in without a session or cookie'E_USER_ERROR);

$user_settings['password_salt'] = substr(md5(mt_rand()), 04);
updateMemberData($user_info['id'], array('password_salt' => $user_settings['password_salt']));

setLoginCookie($timeout time(), $user_info['id'], sha1($user_settings['passwd'] . $user_settings['password_salt']));

redirectexit('action=login2;sa=check;member=' $user_info['id'], $context['server']['needs_login_fix']);
}
// Double check the cookie...
elseif (isset($_GET['sa']) && $_GET['sa'] == 'check')
{
// Strike!  You're outta there!
if ($_GET['member'] != $user_info['id'])
fatal_lang_error('login_cookie_error'false);

// Some whitelisting for login_url...
if (empty($_SESSION['login_url']))
redirectexit();
else
{
// Best not to clutter the session data too much...
$temp $_SESSION['login_url'];
unset($_SESSION['login_url']);

redirectexit($temp);
}
}

// Beyond this point you are assumed to be a guest trying to login.
if (!$user_info['is_guest'])
redirectexit();

// Are you guessing with a script?
spamProtection('login');

// Set the login_url if it's not already set (but careful not to send us to an attachment).
if (empty($_SESSION['login_url']) && isset($_SESSION['old_url']) && strpos($_SESSION['old_url'], 'dlattach') === false && preg_match('~(board|topic)[=,]~'$_SESSION['old_url']) != 0)
$_SESSION['login_url'] = $_SESSION['old_url'];

// Been guessing a lot, haven't we?
if (isset($_SESSION['failed_login']) && $_SESSION['failed_login'] >= $modSettings['failed_login_threshold'] * 3)
fatal_lang_error('login_threshold_fail''critical');

// Set up the cookie length.  (if it's invalid, just fall through and use the default.)
if (isset($_POST['cookieneverexp']) || (!empty($_POST['cookielength']) && $_POST['cookielength'] == -1))
$modSettings['cookieTime'] = 3153600;
elseif (!empty($_POST['cookielength']) && ($_POST['cookielength'] >= || $_POST['cookielength'] <= 525600))
$modSettings['cookieTime'] = (int) $_POST['cookielength'];

loadLanguage('Login');
// Load the template stuff - wireless or normal.
if (WIRELESS)
$context['sub_template'] = WIRELESS_PROTOCOL '_login';
else
{
loadTemplate('Login');
$context['sub_template'] = 'login';
}

// Set up the default/fallback stuff.
$context['default_username'] = isset($_POST['user']) ? preg_replace('~&amp;#(\\d{1,7}|x[0-9a-fA-F]{1,6});~''&#38;#\\1;'htmlspecialchars($_POST['user'])) : '';
$context['default_password'] = '';
$context['never_expire'] = $modSettings['cookieTime'] == 525600 || $modSettings['cookieTime'] == 3153600;
$context['login_errors'] = array($txt['error_occured']);
$context['page_title'] = $txt['login'];

// Add the login chain to the link tree.
$context['linktree'][] = array(
'url' => $scripturl '?action=login',
'name' => $txt['login'],
);

if (!empty($_POST['openid_identifier']) && !empty($modSettings['enableOpenID']))
{
require_once($sourcedir '/Subs-OpenID.php');
if (($open_id smf_openID_validate($_POST['openid_identifier'])) !== 'no_data')
return $open_id;
}

// You forgot to type your username, dummy!
if (!isset($_POST['user']) || $_POST['user'] == '')
{
$context['login_errors'] = array($txt['need_username']);
return;
}

// Hmm... maybe 'admin' will login with no password. Uhh... NO!
if ((!isset($_POST['passwrd']) || $_POST['passwrd'] == '') && (!isset($_POST['hash_passwrd']) || strlen($_POST['hash_passwrd']) != 40))
{
$context['login_errors'] = array($txt['no_password']);
return;
}

// No funky symbols either.
if (preg_match('~[<>&"\'=\\\]~'preg_replace('~(&#38;#(\\d{1,7}|x[0-9a-fA-F]{1,6});)~'''$_POST['user'])) != 0)
{
$context['login_errors'] = array($txt['error_invalid_characters_username']);
return;
}

// Are we using any sort of integration to validate the login?
if (in_array('retry'call_integration_hook('integrate_validate_login', array($_POST['user'], isset($_POST['hash_passwrd']) && strlen($_POST['hash_passwrd']) == 40 $_POST['hash_passwrd'] : null$modSettings['cookieTime'])), true))
{
$context['login_errors'] = array($txt['login_hash_error']);
$context['disable_login_hashing'] = true;
return;
}

// Load the data up!
$request $smcFunc['db_query']('''
SELECT passwd, id_member, id_group, lngfile, is_activated, email_address, additional_groups, member_name, password_salt,
openid_uri, passwd_flood
FROM {db_prefix}members
WHERE ' 
. ($smcFunc['db_case_sensitive'] ? 'LOWER(member_name) = LOWER({string:user_name})' 'member_name = {string:user_name}') . '
LIMIT 1'
,
array(
'user_name' => $smcFunc['db_case_sensitive'] ? strtolower($_POST['user']) : $_POST['user'],
)
);
// Probably mistyped or their email, try it as an email address. (member_name first, though!)
if ($smcFunc['db_num_rows']($request) == 0)
{
$smcFunc['db_free_result']($request);

$request $smcFunc['db_query']('''
SELECT passwd, id_member, id_group, lngfile, is_activated, email_address, additional_groups, member_name, password_salt, openid_uri,
passwd_flood
FROM {db_prefix}members
WHERE email_address = {string:user_name}
LIMIT 1'
,
array(
'user_name' => $_POST['user'],
)
);
// Let them try again, it didn't match anything...
if ($smcFunc['db_num_rows']($request) == 0)
{
$context['login_errors'] = array($txt['username_no_exist']);
return;
}
}

$user_settings $smcFunc['db_fetch_assoc']($request);
$smcFunc['db_free_result']($request);

// Figure out the password using SMF's encryption - if what they typed is right.
if (isset($_POST['hash_passwrd']) && strlen($_POST['hash_passwrd']) == 40)
{
// Needs upgrading?
if (strlen($user_settings['passwd']) != 40)
{
$context['login_errors'] = array($txt['login_hash_error']);
$context['disable_login_hashing'] = true;
unset($user_settings);
return;
}
// Challenge passed.
elseif ($_POST['hash_passwrd'] == sha1($user_settings['passwd'] . $sc))
$sha_passwd $user_settings['passwd'];
else
{
// Don't allow this!
validatePasswordFlood($user_settings['id_member'], $user_settings['passwd_flood']);

$_SESSION['failed_login'] = @$_SESSION['failed_login'] + 1;

if ($_SESSION['failed_login'] >= $modSettings['failed_login_threshold'])
redirectexit('action=reminder');
else
{
log_error($txt['incorrect_password'] . ' - <span class="remove">' $user_settings['member_name'] . '</span>''user');

$context['disable_login_hashing'] = true;
$context['login_errors'] = array($txt['incorrect_password']);
unset($user_settings);
return;
}
}
}
else
$sha_passwd sha1(strtolower($user_settings['member_name']) . un_htmlspecialchars($_POST['passwrd']));

// Bad password!  Thought you could fool the database?!
if ($user_settings['passwd'] != $sha_passwd)
{
// Let's be cautious, no hacking please. thanx.
validatePasswordFlood($user_settings['id_member'], $user_settings['passwd_flood']);

// Maybe we were too hasty... let's try some other authentication methods.
$other_passwords = array();

// None of the below cases will be used most of the time (because the salt is normally set.)
if ($user_settings['password_salt'] == '')
{
// YaBB SE, Discus, MD5 (used a lot), SHA-1 (used some), SMF 1.0.x, IkonBoard, and none at all.
$other_passwords[] = crypt($_POST['passwrd'], substr($_POST['passwrd'], 02));
$other_passwords[] = crypt($_POST['passwrd'], substr($user_settings['passwd'], 02));
$other_passwords[] = md5($_POST['passwrd']);
$other_passwords[] = sha1($_POST['passwrd']);
$other_passwords[] = md5_hmac($_POST['passwrd'], strtolower($user_settings['member_name']));
$other_passwords[] = md5($_POST['passwrd'] . strtolower($user_settings['member_name']));
$other_passwords[] = md5(md5($_POST['passwrd']));
$other_passwords[] = $_POST['passwrd'];

// This one is a strange one... MyPHP, crypt() on the MD5 hash.
$other_passwords[] = crypt(md5($_POST['passwrd']), md5($_POST['passwrd']));

// Snitz style - SHA-256.  Technically, this is a downgrade, but most PHP configurations don't support sha256 anyway.
if (strlen($user_settings['passwd']) == 64 && function_exists('mhash') && defined('MHASH_SHA256'))
$other_passwords[] = bin2hex(mhash(MHASH_SHA256$_POST['passwrd']));

// phpBB3 users new hashing.  We now support it as well ;).
$other_passwords[] = phpBB3_password_check($_POST['passwrd'], $user_settings['passwd']);

// APBoard 2 Login Method.
$other_passwords[] = md5(crypt($_POST['passwrd'], 'CRYPT_MD5'));
}
// The hash should be 40 if it's SHA-1, so we're safe with more here too.
elseif (strlen($user_settings['passwd']) == 32)
{
// vBulletin 3 style hashing?  Let's welcome them with open arms \o/.
$other_passwords[] = md5(md5($_POST['passwrd']) . $user_settings['password_salt']);

// Hmm.. p'raps it's Invision 2 style?
$other_passwords[] = md5(md5($user_settings['password_salt']) . md5($_POST['passwrd']));

// Some common md5 ones.
$other_passwords[] = md5($user_settings['password_salt'] . $_POST['passwrd']);
$other_passwords[] = md5($_POST['passwrd'] . $user_settings['password_salt']);
}
elseif (strlen($user_settings['passwd']) == 40)
{
// Maybe they are using a hash from before the password fix.
$other_passwords[] = sha1(strtolower($user_settings['member_name']) . un_htmlspecialchars($_POST['passwrd']));

// BurningBoard3 style of hashing.
$other_passwords[] = sha1($user_settings['password_salt'] . sha1($user_settings['password_salt'] . sha1($_POST['passwrd'])));

// Perhaps we converted to UTF-8 and have a valid password being hashed differently.
if ($context['character_set'] == 'utf8' && !empty($modSettings['previousCharacterSet']) && $modSettings['previousCharacterSet'] != 'utf8')
{
// Try iconv first, for no particular reason.
if (function_exists('iconv'))
$other_passwords['iconv'] = sha1(strtolower(iconv('UTF-8'$modSettings['previousCharacterSet'], $user_settings['member_name'])) . un_htmlspecialchars(iconv('UTF-8'$modSettings['previousCharacterSet'], $_POST['passwrd'])));

// Say it aint so, iconv failed!
if (empty($other_passwords['iconv']) && function_exists('mb_convert_encoding'))
$other_passwords[] = sha1(strtolower(mb_convert_encoding($user_settings['member_name'], 'UTF-8'$modSettings['previousCharacterSet'])) . un_htmlspecialchars(mb_convert_encoding($_POST['passwrd'], 'UTF-8'$modSettings['previousCharacterSet'])));
}
}

// SMF's sha1 function can give a funny result on Linux (Not our fault!). If we've now got the real one let the old one be valid!
if (strpos(strtolower(PHP_OS), 'win') !== 0)
{
require_once($sourcedir '/Subs-Compat.php');
$other_passwords[] = sha1_smf(strtolower($user_settings['member_name']) . un_htmlspecialchars($_POST['passwrd']));
}

// Whichever encryption it was using, let's make it use SMF's now ;).
if (in_array($user_settings['passwd'], $other_passwords))
{
$user_settings['passwd'] = $sha_passwd;
$user_settings['password_salt'] = substr(md5(mt_rand()), 04);

// Update the password and set up the hash.
updateMemberData($user_settings['id_member'], array('passwd' => $user_settings['passwd'], 'password_salt' => $user_settings['password_salt'], 'passwd_flood' => ''));
}
// Okay, they for sure didn't enter the password!
else
{
// They've messed up again - keep a count to see if they need a hand.
$_SESSION['failed_login'] = @$_SESSION['failed_login'] + 1;

// Hmm... don't remember it, do you?  Here, try the password reminder ;).
if ($_SESSION['failed_login'] >= $modSettings['failed_login_threshold'])
redirectexit('action=reminder');
// We'll give you another chance...
else
{
// Log an error so we know that it didn't go well in the error log.
log_error($txt['incorrect_password'] . ' - <span class="remove">' $user_settings['member_name'] . '</span>''user');

$context['login_errors'] = array($txt['incorrect_password']);
return;
}
}
}
elseif (!empty($user_settings['passwd_flood']))
{
// Let's be sure they weren't a little hacker.
validatePasswordFlood($user_settings['id_member'], $user_settings['passwd_flood'], true);

// If we got here then we can reset the flood counter.
updateMemberData($user_settings['id_member'], array('passwd_flood' => ''));
}

// Correct password, but they've got no salt; fix it!
if ($user_settings['password_salt'] == '')
{
$user_settings['password_salt'] = substr(md5(mt_rand()), 04);
updateMemberData($user_settings['id_member'], array('password_salt' => $user_settings['password_salt']));
}

// Check their activation status.
if (!checkActivation())
return;

DoLogin();
}

function 
checkActivation()
{
global $context$txt$scripturl$user_settings$modSettings;

if (!isset($context['login_errors']))
$context['login_errors'] = array();

// What is the true activation status of this account?
$activation_status $user_settings['is_activated'] > 10 $user_settings['is_activated'] - 10 $user_settings['is_activated'];

// Check if the account is activated - COPPA first...
if ($activation_status == 5)
{
$context['login_errors'][] = $txt['coppa_no_concent'] . ' <a href="' $scripturl '?action=coppa;member=' $user_settings['id_member'] . '">' $txt['coppa_need_more_details'] . '</a>';
return false;
}
// Awaiting approval still?
elseif ($activation_status == 3)
fatal_lang_error('still_awaiting_approval''user');
// Awaiting deletion, changed their mind?
elseif ($activation_status == 4)
{
if (isset($_REQUEST['undelete']))
{
updateMemberData($user_settings['id_member'], array('is_activated' => 1));
updateSettings(array('unapprovedMembers' => ($modSettings['unapprovedMembers'] > $modSettings['unapprovedMembers'] - 0)));
}
else
{
$context['disable_login_hashing'] = true;
$context['login_errors'][] = $txt['awaiting_delete_account'];
$context['login_show_undelete'] = true;
return false;
}
}
// Standard activation?
elseif ($activation_status != 1)
{
log_error($txt['activate_not_completed1'] . ' - <span class="remove">' $user_settings['member_name'] . '</span>'false);

$context['login_errors'][] = $txt['activate_not_completed1'] . ' <a href="' $scripturl '?action=activate;sa=resend;u=' $user_settings['id_member'] . '">' $txt['activate_not_completed2'] . '</a>';
return false;
}
return true;
}

function 
DoLogin()
{
global $txt$scripturl$user_info$user_settings$smcFunc;
global $cookiename$maintenance$modSettings$context$sourcedir;

// Load cookie authentication stuff.
require_once($sourcedir '/Subs-Auth.php');

// Call login integration functions.
call_integration_hook('integrate_login', array($user_settings['member_name'], isset($_POST['hash_passwrd']) && strlen($_POST['hash_passwrd']) == 40 $_POST['hash_passwrd'] : null$modSettings['cookieTime']));

// Get ready to set the cookie...
$username $user_settings['member_name'];
$user_info['id'] = $user_settings['id_member'];

// Bam!  Cookie set.  A session too, just in case.
setLoginCookie(60 $modSettings['cookieTime'], $user_settings['id_member'], sha1($user_settings['passwd'] . $user_settings['password_salt']));

// Reset the login threshold.
if (isset($_SESSION['failed_login']))
unset($_SESSION['failed_login']);

$user_info['is_guest'] = false;
$user_settings['additional_groups'] = explode(','$user_settings['additional_groups']);
$user_info['is_admin'] = $user_settings['id_group'] == || in_array(1$user_settings['additional_groups']);

// Are you banned?
is_not_banned(true);

// An administrator, set up the login so they don't have to type it again.
if ($user_info['is_admin'] && isset($user_settings['openid_uri']) && empty($user_settings['openid_uri']))
{
$_SESSION['admin_time'] = time();
unset($_SESSION['just_registered']);
}

// Don't stick the language or theme after this point.
unset($_SESSION['language'], $_SESSION['id_theme']);

// First login?
$request $smcFunc['db_query']('''
SELECT last_login
FROM {db_prefix}members
WHERE id_member = {int:id_member}
AND last_login = 0'
,
array(
'id_member' => $user_info['id'],
)
);
if ($smcFunc['db_num_rows']($request) == 1)
$_SESSION['first_login'] = true;
else
unset($_SESSION['first_login']);
$smcFunc['db_free_result']($request);

// You've logged in, haven't you?
updateMemberData($user_info['id'], array('last_login' => time(), 'member_ip' => $user_info['ip'], 'member_ip2' => $_SERVER['BAN_CHECK_IP']));

// Get rid of the online entry for that old guest....
$smcFunc['db_query']('''
DELETE FROM {db_prefix}log_online
WHERE session = {string:session}'
,
array(
'session' => 'ip' $user_info['ip'],
)
);
$_SESSION['log_time'] = 0;

// Just log you back out if it's in maintenance mode and you AREN'T an admin.
if (!empty($maintenance) && !$user_info['is_guest'])
{
// logged in but we are in maintenance mode .... 
loadUserSettings();
loadPermissions();
}
if (empty($maintenance) || allowedTo('admin_maintmode'))
redirectexit('action=login2;sa=check;member=' $user_info['id'], $context['server']['needs_login_fix']);
else
redirectexit('action=logout;' $context['session_var'] . '=' $context['session_id'], $context['server']['needs_login_fix']);
}

// Log the user out.
function Logout($internal false$redirect true)
{
global $sourcedir$user_info$user_settings$context$modSettings$smcFunc;

// Make sure they aren't being auto-logged out.
if (!$internal)
checkSession('get');

require_once($sourcedir '/Subs-Auth.php');

if (isset($_SESSION['pack_ftp']))
$_SESSION['pack_ftp'] = null;

// They cannot be open ID verified any longer.
if (isset($_SESSION['openid']))
unset($_SESSION['openid']);

// It won't be first login anymore.
unset($_SESSION['first_login']);

// Just ensure they aren't a guest!
if (!$user_info['is_guest'])
{
// Pass the logout information to integrations.
call_integration_hook('integrate_logout', array($user_settings['member_name']));

// If you log out, you aren't online anymore :P.
$smcFunc['db_query']('''
DELETE FROM {db_prefix}log_online
WHERE id_member = {int:current_member}'
,
array(
'current_member' => $user_info['id'],
)
);
}

$_SESSION['log_time'] = 0;

// Empty the cookie! (set it in the past, and for id_member = 0)
setLoginCookie(-36000);

// Off to the merry board index we go!
if ($redirect)
{
if (empty($_SESSION['logout_url']))
redirectexit(''$context['server']['needs_login_fix']);
else
{
$temp $_SESSION['logout_url'];
unset($_SESSION['logout_url']);

redirectexit($temp$context['server']['needs_login_fix']);
}
}
}

// MD5 Encryption used for older passwords.
function md5_hmac($data$key)
{
$key str_pad(strlen($key) <= 64 $key pack('H*'md5($key)), 64chr(0x00));
return md5(($key str_repeat(chr(0x5c), 64)) . pack('H*'md5(($key str_repeat(chr(0x36), 64)) . $data)));
}

// Special encryption used by phpBB3.
function phpBB3_password_check($passwd$passwd_hash)
{
// Too long or too short?
if (strlen($passwd_hash) != 34)
return;

// Range of characters allowed.
$range './0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz';

// Tests
$strpos strpos($range$passwd_hash[3]);
$count << $strpos;
$count2 $count;
$salt substr($passwd_hash48);

// Things are done differently for PHP 5.
if (@version_compare(PHP_VERSION'5') >= 0)
{
$hash md5($salt $passwdtrue);
for (; $count != 0; --$count)
$hash md5($hash $passwdtrue);
}
else
{
$hash pack('H*'md5($salt $passwd));
for (; $count != 0; --$count)
$hash pack('H*'md5($hash $passwd));
}

$output substr($passwd_hash012);
$i 0;
while ($i 16)
{
$value ord($hash[$i++]);
$output .= $range[$value 0x3f];

if ($i 16)
$value |= ord($hash[$i]) << 8;

$output .= $range[($value >> 6) & 0x3f];

if ($i++ >= 16)
break;

if ($i 16)
$value |= ord($hash[$i]) << 16;

$output .= $range[($value >> 12) & 0x3f];

if ($i++ >= 16)
break;

$output .= $range[($value >> 18) & 0x3f];
}

// Return now.
return $output;
}

// This protects against brute force attacks on a member's password. Importantly even if the password was right we DON'T TELL THEM!
function validatePasswordFlood($id_member$password_flood_value false$was_correct false)
{
global $smcFunc$cookiename$sourcedir;

// As this is only brute protection, we allow 5 attempts every 10 seconds.

// Destroy any session or cookie data about this member, as they validated wrong.
require_once($sourcedir '/Subs-Auth.php');
setLoginCookie(-36000);

if (isset($_SESSION['login_' $cookiename]))
unset($_SESSION['login_' $cookiename]);

// We need a member!
if (!$id_member)
{
// Redirect back!
redirectexit();

// Probably not needed, but still make sure...
fatal_lang_error('no_access'false);
}

// Right, have we got a flood value?
if ($password_flood_value !== false)
@list ($time_stamp$number_tries) = explode('|'$password_flood_value);

// Timestamp invalid or non-existent?
if (empty($number_tries) || $time_stamp < (time() - 10))
{
// If it wasn't *that* long ago, don't give them another five goes.
$number_tries = !empty($number_tries) && $time_stamp < (time() - 20) ? 0;
$time_stamp time();
}

$number_tries++;

// Broken the law?
if ($number_tries 5)
fatal_lang_error('login_threshold_brute_fail''critical');

// Otherwise set the members data. If they correct on their first attempt then we actually clear it, otherwise we set it!
updateMemberData($id_member, array('passwd_flood' => $was_correct && $number_tries == '' $time_stamp '|' $number_tries));

}

?>

Offline emanuele

  • SMF Super Hero
  • *******
  • Posts: 14,156
  • Gender: Male
  • THERE'S JUST ME
Re: Togliere loghi
« Reply #12 on: January 19, 2013, 10:15:16 AM »
Di norma meglio usare la funzione allegati, non copiare ed incollare il codice nel post.


Take a peek at what I'm doing! ;D



Hai bisogno di supporto in Italiano?

Aiutateci ad aiutarvi: spiegate bene il vostro problema: no, "non funziona" non è una spiegazione!!
1) Cosa fai,
2) cosa ti aspetti,
3) cosa ottieni.

Offline emanuele

  • SMF Super Hero
  • *******
  • Posts: 14,156
  • Gender: Male
  • THERE'S JUST ME
Re: Togliere loghi
« Reply #13 on: January 19, 2013, 10:18:47 AM »
Ho modificato le stringhe che mi hai postato..... non ha cambiato nulla
Strizza gli occhi e guarda in alto: nero su blu scuro la stringa che *deve* apparire (sopra al nome del forum sulla sinistra).


Take a peek at what I'm doing! ;D



Hai bisogno di supporto in Italiano?

Aiutateci ad aiutarvi: spiegate bene il vostro problema: no, "non funziona" non è una spiegazione!!
1) Cosa fai,
2) cosa ti aspetti,
3) cosa ottieni.

Offline pierpis

  • Jr. Member
  • **
  • Posts: 338
Re: Togliere loghi
« Reply #14 on: January 19, 2013, 01:04:28 PM »
?????????  nero su blu scuro? Ho strizzato gli occhi al massimo ma non ho visto i colori che mi hai scritto.... li ho cercati nell'ultimo copia/incolla che ti ho postato... ma ???
Per quanto riguarda allegare.... ma volevi un'immagine?

Offline emanuele

  • SMF Super Hero
  • *******
  • Posts: 14,156
  • Gender: Male
  • THERE'S JUST ME
Re: Togliere loghi
« Reply #15 on: January 19, 2013, 01:09:32 PM »
Puoi postare (o mandarmi) un link al tuo forum?


Take a peek at what I'm doing! ;D



Hai bisogno di supporto in Italiano?

Aiutateci ad aiutarvi: spiegate bene il vostro problema: no, "non funziona" non è una spiegazione!!
1) Cosa fai,
2) cosa ti aspetti,
3) cosa ottieni.