Advertisement:

Author Topic: problem save settings  (Read 453 times)

Offline Panoulis64

  • Semi-Newbie
  • *
  • Posts: 55
problem save settings
« on: April 08, 2021, 10:24:30 AM »
When i go to save, while everything is done properly, it does not work.
I will have to do the same action several times to save.
What's wrong;
I do not know if it is relevant, but when I log in, sometimes I do the same action twice.

Sorry if my English is not completely correct.

Offline Aleksi "Lex" Kilpinen

  • A Peculiar Finn
  • Project Manager
  • SMF Super Hero
  • *
  • Posts: 19,825
  • Gender: Male
  • Don't worry, I'm n00b friendly
    • Aleksi.Kilpinen on Facebook
    • LexArma on GitHub
    • aleksi-kilpinen on LinkedIn
    • My Daily Dose Of Blasphemy
Re: problem save settings
« Reply #1 on: April 08, 2021, 10:37:59 AM »
Sounds like a bad server side cache. You should probably ask your host if they are running some cache, and if they could adjust it or disable it.
A Finnish Project Manager (Support Specialist)
Happily running multiple SMF 2.x installations.
 Fooling around with an i7-10700 @ 2,90GHz-4.80GHz / 16Gb / RTX-2070 Super / 3840x2160 / Win 10 x64


How you can help SMF

"Before you allow people access to your forum, especially in an administrative position, you must be aware that that person can seriously damage your forum.
Therefore, you should only allow people that you trust, implicitly, to have such access." -Douglas

Offline shawnb61

  • Dev. Team Mentor
  • Developer
  • SMF Hero
  • *
  • Posts: 3,111
    • sbulen on GitHub
Re: problem save settings
« Reply #2 on: April 08, 2021, 11:19:32 AM »
We have also seen this when there are http vs https conflicts.

In repair_settings.php, if you are running https, make sure all your settings are https.  (Or http if running http...)
Address the process rather than the outcome.  Then, the outcome becomes more likely.   - Fripp

Offline m4z

  • 98.8% chimp
  • Localizer
  • Sophist Member
  • *
  • Posts: 1,367
  • /mÉ›s/
Re: problem save settings
« Reply #3 on: April 09, 2021, 03:39:41 AM »
Which version of SMF are you using?
"Faith is what you have in things that don't exist."
--Homer Simpson

Es gibt hier im Forum ein deutsches Support-Board!
<werbung>Meine Freundin hat ihr erstes Buch veröffentlicht!</werbung>

Offline Panoulis64

  • Semi-Newbie
  • *
  • Posts: 55
Re: problem save settings
« Reply #4 on: April 09, 2021, 05:38:07 AM »
The last on.
Smf 2.0.18

Offline Panoulis64

  • Semi-Newbie
  • *
  • Posts: 55
Re: problem save settings
« Reply #5 on: April 09, 2021, 11:17:46 AM »
Aleksi "Lex" Kilpinen & shawnb61
Saturday or Sunday, I will see with the web master, that you wrote to me and I will answer you.
Thanks.

Offline Aleksi "Lex" Kilpinen

  • A Peculiar Finn
  • Project Manager
  • SMF Super Hero
  • *
  • Posts: 19,825
  • Gender: Male
  • Don't worry, I'm n00b friendly
    • Aleksi.Kilpinen on Facebook
    • LexArma on GitHub
    • aleksi-kilpinen on LinkedIn
    • My Daily Dose Of Blasphemy
Re: problem save settings
« Reply #6 on: April 09, 2021, 11:24:29 AM »
Sure, we'll be here :)
A Finnish Project Manager (Support Specialist)
Happily running multiple SMF 2.x installations.
 Fooling around with an i7-10700 @ 2,90GHz-4.80GHz / 16Gb / RTX-2070 Super / 3840x2160 / Win 10 x64


How you can help SMF

"Before you allow people access to your forum, especially in an administrative position, you must be aware that that person can seriously damage your forum.
Therefore, you should only allow people that you trust, implicitly, to have such access." -Douglas

Offline Panoulis64

  • Semi-Newbie
  • *
  • Posts: 55
Re: problem save settings
« Reply #7 on: April 12, 2021, 09:57:48 AM »
The problem was fixed, it was probably created by package conflicts.
There seems to be a more general problem.
The web master suggested me let him do it a clean new installation smf, and to put the packages one by one, to see if they conflict and then to enter the content of the forum.
Thanks.

Offline Aleksi "Lex" Kilpinen

  • A Peculiar Finn
  • Project Manager
  • SMF Super Hero
  • *
  • Posts: 19,825
  • Gender: Male
  • Don't worry, I'm n00b friendly
    • Aleksi.Kilpinen on Facebook
    • LexArma on GitHub
    • aleksi-kilpinen on LinkedIn
    • My Daily Dose Of Blasphemy
Re: problem save settings
« Reply #8 on: April 12, 2021, 10:10:40 AM »
Sounds unlikely, but still good if your problem is gone.
A Finnish Project Manager (Support Specialist)
Happily running multiple SMF 2.x installations.
 Fooling around with an i7-10700 @ 2,90GHz-4.80GHz / 16Gb / RTX-2070 Super / 3840x2160 / Win 10 x64


How you can help SMF

"Before you allow people access to your forum, especially in an administrative position, you must be aware that that person can seriously damage your forum.
Therefore, you should only allow people that you trust, implicitly, to have such access." -Douglas

Offline Panoulis64

  • Semi-Newbie
  • *
  • Posts: 55
Re: problem save settings
« Reply #9 on: April 12, 2021, 10:37:24 AM »
We saw what you suggested, they had no problem.
we also changed the pip but nothing.
We dealt with the packages and the conflict they have and when we came back to see what to do with the storage issue, it was resolved.