Author Topic: Forum Firewall (Read 306404 times)

Alex' Manson · « **Reply #500 on:** July 26, 2011, 11:53:43 PM »

added it, will see how ti goes.

digit · « **Reply #501 on:** July 28, 2011, 04:49:37 AM »

Hi again Butchs,

Well, I have the firewall installed ... but I see one entry in the log with the IP listed as "Keep-Alive"... that was banned for a DOS attack.

However, that ban has no triggers... so it seems pretty useless!

I would hate to have a lot of useless bans to delete!

What can be done about that.

Thanks again,
digit

butchs · « **Reply #502 on:** July 28, 2011, 05:26:05 AM »

About all you can do is turn ban to never and let it block for the cache duration.

digit · « **Reply #503 on:** July 28, 2011, 05:53:33 AM »

Thanks... in reference to DOS attacks... what happens if a post has 20 images?

Will all those requests be considered as one?

Ilkharnos · « **Reply #504 on:** July 28, 2011, 10:44:44 AM »

Hello,

My site was attacked and it became useless. Thank god I had made a backup so I managed to restore it. For a better protection, I started to use this mod. I'm not good at security and coding business, so I checked the tick boxes of some options (safe ones, which I don't completely understand what they do) and enabled the mod. Then I got this:

SECURITY RISK: MAGIC_QUOTES ARE ON!

Can you tell me how I can use this mod effectively and how to overcome this problem?

Thank you for your assistance.

Regards.

Tony Reid · « **Reply #505 on:** July 28, 2011, 10:48:19 AM »

Ask your host to disable it... alternatively stick this line in .htaccess

php_flag magic_quotes_gpc Off

butchs · « **Reply #506 on:** July 28, 2011, 06:12:16 PM »

Quote from: digit on July 28, 2011, 05:53:33 AM

Thanks... in reference to DOS attacks... what happens if a post has 20 images?

Will all those requests be considered as one?

20 images? Why so many in one post? Not sure... Maybe if your dos setting is too low.

digit · « **Reply #507 on:** July 28, 2011, 06:42:04 PM »

Quote from: butchs on July 28, 2011, 06:12:16 PM

Quote from: digit on July 28, 2011, 05:53:33 AM
Thanks... in reference to DOS attacks... what happens if a post has 20 images?

Will all those requests be considered as one?

20 images? Why so many in one post? Not sure... Maybe if your dos setting is too low.

Well, every site is different - I was just wondering if images embedded within posts are counted as hits... could be an issue.... possibly for me... I think I have a limit of 10 images per post - of which - maybe 1% of my posts contain that many - just hate to be banning people for browsing.

butchs · « **Reply #508 on:** July 28, 2011, 08:08:28 PM »

Not sure but you can test by logging in as a regular member and posting 10 images.

bruce86 · « **Reply #509 on:** July 30, 2011, 08:40:21 PM »

Help me!!
http://www.passiongames.it/forum/index.php

Alex' Manson · « **Reply #510 on:** July 30, 2011, 11:57:34 PM »

Quote from: bruce86 on July 30, 2011, 08:40:21 PM

Help me!!
http://www.passiongames.it/forum/index.php

the bypass settings were messed up, i was blocked too for bypass attempt ! 403.

butchs · « **Reply #511 on:** July 31, 2011, 07:48:01 AM »

BYPASS PROTECTION HELP

If you made an error read this post to correct access.

There are three settings to adjust.

Admin IP Low
Admin IP High
Admin Domain Name

The modification will install some default setting but they will need to be adjusted before enabling. We will set up an example address. The ip address will be ""67.195.112.83".

First you will want to do a whois on the address.

Quote

Network
NetRange 67.195.0.0 - 67.195.255.255
CIDR 67.195.0.0/16
Name A-YAHOO-US8
Handle NET-67-195-0-0-1
Parent NET67 (NET-67-0-0-0-0)
Net Type Direct Allocation
Origin AS
Nameservers NS2.YAHOO.COM
NS1.YAHOO.COM
NS5.YAHOO.COM
NS4.YAHOO.COM
NS3.YAHOO.COM

The IP low and High is the beginning and end of the netrange where your ip can be located.

Here I choose:
Admin IP Low can be "67.195.0.4"
Admin IP High can be "67.195.255.254"

Why did the "Admin IP Low" start at x.x.x.4?

x.x.x.0 Is the automatically assigned network address.
x.x.x.1 Used as the gateway address.
x.x.x.2 Used for addresses within the gateway.
x.x.x.3 Addresses beyond 3 are used for users.

Admin IP High end at x.x.x.254?

x.x.x.255 The broadcast address.

You should narrow it down further the only be the range of ip addresses you will access the forum. If you have a fixed ip address then both low and high are the same.

If you check your DNS record for the same ip you will get:

Quote

Retrieving DNS records for b3091163.crawl.yahoo.net...
DNS servers
ns3.yahoo.com
ns4.yahoo.com
ns1.yahoo.com
ns5.yahoo.com
ns2.yahoo.com

Answer records
b3091163.crawl.yahoo.net A 67.195.112.83 7200s

Authority records
crawl.yahoo.net NS ns3.yahoo.com 172800s
crawl.yahoo.net NS ns5.yahoo.com 172800s
crawl.yahoo.net NS ns2.yahoo.com 172800s
crawl.yahoo.net NS ns4.yahoo.com 172800s
crawl.yahoo.net NS ns1.yahoo.com 172800s

The "Admin Domain Name" is a shortened version of the "A or Answer record".

You want to take part of the right end of this record. The part that does not change. Usually after a dash or before a weird number. Too much and/or too little can be an problem. In this example I would use "crawl.yahoo.net" as the "Admin Domain Name".

bruce86 · « **Reply #512 on:** July 31, 2011, 08:25:47 AM »

I can not find phpmyadmin. $:-\$

butchs · « **Reply #513 on:** July 31, 2011, 08:28:54 AM »

You need to log in your hosts cpanel. If you do to know what I am talking about contact your host.

bruce86 · « **Reply #514 on:** July 31, 2011, 08:31:03 AM »

Why do this?

butchs · « **Reply #515 on:** July 31, 2011, 08:39:37 AM »

I am trying to help you. Yet you have taken a full circle.

You blocked yourself because you did not follow instructions. I have said many times do not enable the mod until after a few days and you are sure you are not going to block yourself. You need to disable the mod and fix the settings before enabling it again. If you have admin access simply uninstall and reinstall the mod. But if you do not then you have to do it via phpmyadmin.

Read the post for how to do that. Local host support is beyond my abilities. Contact your host for how to access phpmyadmin.

bruce86 · « **Reply #516 on:** July 31, 2011, 08:43:25 AM »

Ah ok..

Thank you!..

butchs · « **Reply #517 on:** July 31, 2011, 11:35:29 AM »

You're welcome.

MiY4Gi · « **Reply #518 on:** August 05, 2011, 05:12:09 PM »

What does the setting "Robots.txt action's" do?

What I want is to block any bots/crawlers that disobey my robots.txt file. Does this setting do that?

Also, is it possible to add an option in the firewall to block any users that browse too quickly or use excessive traffic in a short time?

butchs · « **Reply #519 on:** August 05, 2011, 08:08:27 PM »

Quote from: MiY4Gi on August 05, 2011, 05:12:09 PM

What does the setting "Robots.txt action's" do?

What I want is to block any bots/crawlers that disobey my robots.txt file. Does this setting do that?

It is easy to spoof an ip. If your properly set the robots file and test it at the google webmasters site, the good bots will follow it. The bad ip spoofed bots will not and get blocked. This options stopped a nasty ddos attack on my site.

Read this link on how.

Quote from: MiY4Gi on August 05, 2011, 05:12:09 PM

Also, is it possible to add an option in the firewall to block any users that browse too quickly or use excessive traffic in a short time?

It is there already it is called the dos attack. Set the trigger and cache to above 20 and it will take cars of them. Whatever you do, do not go too low.

News:

Author Topic: Forum Firewall (Read 306404 times)