Advertisement:

Author Topic: YaBB 2.4 to SMF 1.1.21 and 1.1.14 - User Posts get cut off  (Read 1958 times)

Offline HolgerGr

  • Newbie
  • *
  • Posts: 4
YaBB 2.4 to SMF 1.1.21 and 1.1.14 - User Posts get cut off
« on: December 11, 2017, 03:04:03 AM »
Hello there,

I posted this issue to the official support thread, too but no one replied. So I'm going to try a seperate Post.

I converted my YaBB 2.4 to an older version of SMF. I first tried 1.1.21 and then 1.1.14. I can't install an even older version because of my MySQL version.

The conversion was running without any error message exept for the attachments (because I didn't install the attachment mod package). Everything seemed to be absolutely fine. All of the thousands of Topics and Postings were converted.

But: Lots of Postings got cut off at the first unusual characters (Ä, Ü oder Ö). My first try was with UTF-8 charset, even for the board and for the conversion. My second try was the using of ISO-8859-1 for the converter an still UTF-8 for the forum. The third try was not using UTF-8 for the forum.

Lastly I installed the oldest version of SMF that I can install on my server. It's the 1.1.14. The results were the same like with 1.1.21.
Some of the Userpostings are complete, some are cut off.
Also the most of the User roles are missing (what is not the biggest deal at all).

What I don't understand is that some postings are converted completely and some are not. There are no diffrences between those postings on the YaBB 2.4

Offline HolgerGr

  • Newbie
  • *
  • Posts: 4
Re: YaBB 2.4 to SMF 1.1.21 and 1.1.14 - User Posts get cut off
« Reply #1 on: December 11, 2017, 04:20:31 AM »
What I did to solve the problem til now (without success):

I ran all of the maintanence Functions on the YaBB 2.4 before converting.
I ran all the maintanence functions on the SMF after converting.
I screwed up all related PHP.ini values (memory limit, max file size etc.)

I tried all charsets that are supported in the converter.
I changed the block settings in the yabb22_to_smf.php to (first) 10000 für posts1 and then to the default value (100).
« Last Edit: December 11, 2017, 04:35:19 AM by HolgerGr »