Undefined array key "show_bbc" and image display re-scale not working

[probeman]

So we finally got our forum transferred to the new host and upgraded to 2.1.4, and it all seem to be working great, pretty much.  I see only two issues:

1. I'm seeing repeated admin errors, from when I add or browse an image in the image gallery. See attached image below.

I searched for the error in this forum but didn't see anything related except to upgrade to the latest version but we already are at 2.1.4.  How do we repair this issue in 2.1.4?

2. When I click on an image in a post (linked to the image gallery) the image doesn't re-display at full size.

In other words, in 2.0.17 the image displayed at about 50%, but if I clicked on an "in line" image, the image expanded to display a 1:1 pixel mapping.  Clicking again on the image made it go back to the smaller display size.

How do I get that click to display full size image feature back in 2.1?

[Kindred]

For mod support you need to ask in the topic dedicated to supporting the specific mod.

[probeman]

For mod support you need to ask in the topic dedicated to supporting the specific mod.

VBGamer45 said we need to install the current version of the gallery mod to fix the BBC error (and we will do that), but they said that the image not resizing when clicked is an SMF problem, maybe the Theme... but I looked in there and don't see anything that might be related.

Here is how I originally reported the issue of an image click not resizing the image: "When I click on an image in a post (linked to the image gallery) the image doesn't re-display at full size.

In other words, in 2.0.17 the image displayed at about 50%, but if I clicked on an "in line" image, the image expanded to display a 1:1 pixel mapping.  Clicking again on the image made it go back to the smaller display size.

How do I get that click to display full size image feature back in 2.1?"

Note also that in 2.1.4 when I hover the mouse over images that were copied over from 2.0.17, it shows the hand icon to indicate that it is clickable, but it doesn't re-size when clicked. But today I tried uploading a new image to the image gallery and pasting that in a post.

In this most recent test, the hand cursor doesn't even appear at all when hovering over the image, and it's a large image that is displayed at ~50% actual size.

How do I get the clickable image re-sizing back on?

[probeman]

See above reply for details...

Here is an example of a post with an image brought over from our 2.0.17 SMF:

https://smf.probesoftware.com/index.php?topic=2.msg10746#msg10746

The mouse hover shows a hand icon but nothing happens when clicked.

Now here is a recent image posted on the 2.1.4 SMF:

https://smf.probesoftware.com/index.php?topic=2.msg12897#msg12897

Note that a mouse hover over the image doesn't even show that it's clickable.

So the question is: how do we make these images clickable (and expand to full size) like they were in the 2.0.17 SMF version?

[Kindred]

I believe that works here...  if so, then there is something that you have done on your system to break it -- either a mod or theme...

[probeman]

I believe that works here...  if so, then there is something that you have done on your system to break it -- either a mod or theme...

I note that it doesn't seem like this support forum has in-line images inserted in a post using the BBC code... see the links above for examples in our forum.

The only mod we have installed is the Gallery Lite 5.5 which was what was on the 2.0.17 SMF version.   We will upgrade to 8.0.1 on the SMF 2.1.4 version on Monday, I'm just wondering what setting needs to be changed to get this image click behavior to work again?

[Aleksi "Lex" Kilpinen]

There you go.



And true, this doesn't seem to offer a way to see it in full size.

The mouse hover shows a hand icon but nothing happens when clicked.

Not true, it does resize - At least for me. Not much, but it does.

I'm guessing, both of these are limited by the Admin settings  Max display width\height of posted or attached images

[probeman]

There you go.



And true, this doesn't seem to offer a way to see it in full size.

The mouse hover shows a hand icon but nothing happens when clicked.

Not true, it does resize - At least for me. Not much, but it does.

I'm guessing, both of these are limited by the Admin settings  Max display width\height of posted or attached images

I really appreciate your help, we'll figure this out eventually I'm sure.

OK, so you get a hand cursor for the above in-line image you inserted when the mouse hovers over it?  And it changes size to full size when clicked on?  Not for me!

The max image size in the Gallery settings were both 2500 pixels which should be more than enough to display the above image at full size (my monitor the image was captured from is only 1920 pixels wide!) so I changed them both to 3000 pixels but no effect.

Again: I don't get the hand cursor and the image you posted doesn't re-size when clicked on.

You can see that the image you posted in your post isn't full size because the fonts are so small.  I wish I could grab a screen capture on the old forum, but the re-directs we put in prevent that. 

The image we are discussing is actually Height: 694 Width: 1194 but it is certainly not being displayed that large.

[Aleksi "Lex" Kilpinen]

OK, so you get a hand cursor for the above in-line image you inserted when the mouse hovers over it?  And it changes size to full size when clicked on?  Not for me!

No, I don't. Like I said it doesn't offer a way to resize it.
But for your example post from 2.0, on your site, I do see the hand icon and it does resize. Not much, but it does.
So what I'm saying is there is likely something different between these images, or how they are embedded. And my first guess was just the admin size restrictions, as the embed I made here is exactly 600px wide, and that is the admin width restriction on this site. 

[probeman]

OK, so you get a hand cursor for the above in-line image you inserted when the mouse hovers over it?  And it changes size to full size when clicked on?  Not for me!

No, I don't. Like I said it doesn't offer a way to resize it.
But for your example post from 2.0, on your site, I do see the hand icon and it does resize. Not much, but it does.
So what I'm saying is there is likely something different between these images, or how they are embedded. And my first guess was just the admin size restrictions, as the embed I made here is exactly 600px wide, and that is the admin width restriction on this site. 

OK, that makes sense. 

But our 2.1 site has a size restriction of 2500 (now 3000) pixels and I don't even get the hand cursor.

On thing I've noticed is that the original images from our 2.0 site often had a width and height defined like this:

Code Select Expand

[img width=512 height=473]https://smf.probesoftware.com/gallery/1_03_10_24_9_35_41.png[/img]

But the new images in 2.1 don't have this info...

I also notice this in admin when I try to uninstall the gallery (to upgrade it to 8.0.1) or install the recaptha mod:

could this be related to the problem?

[Kindred]

Well, you need to look at exactly WHAT is failing on the uninstall and manually do that action -- just like you would for a failed step on install...

[probeman]

Well, you need to look at exactly WHAT is failing on the uninstall and manually do that action -- just like you would for a failed step on install...

You more than the warning I showed in the image above that the Third party and SMF download sites are "unknown or not found"?

Where would I find that additional information?

[Kindred]

The not found sites ate irrelevant

[probeman]

The not found sites ate irrelevant

Ok, so where would one find more useful information on why these errors are being generated when I try to uninstall Gallery Lite 5.5?

I ask because VBGamer45 suggested that we try to uninstall Gallery 5.5 before installing 8.0.1.

[vbgamer45]

I need to see list of errors screenshot. Hard to tell if language file save to ignore.

[Kindred]

https://wiki.simplemachines.org/smf/Error_in_mod_installation

Same thing, just replace install with uninstall

[probeman]

I need to see list of errors screenshot. Hard to tell if language file save to ignore.

See attached image.

[vbgamer45]

Below that should be a list of errors... I am not seeing the whole page.

[probeman]

Below that should be a list of errors... I am not seeing the whole page.

Sorry about that!

See images below.  The two "add before" errors are the same.

[vbgamer45]

There is no failures there. You can proceed with the uninstall.